Meerwein-Ponndorf-Verley alkynylation of aldehydes: essential modification of aluminium alkoxides for rate acceleration and asymmetric synthesis

A novel carbonyl alkynylation has been accomplished based on utilization of the Meerwein-Ponndorf-Verley (MPV) reaction system. The success of the MPV alkynylation crucially depends on the discovery of the remarkable ligand acceleration effect of 2,2'-biphenol. For example, the alkynylation of chloral (2c) with the aluminium alkoxide 6(R = Ph), prepared in situ from Me(3)Al, 2,2'-biphenol and 2-methyl-4-phenyl-3-butyn-2-ol (1a) as an alkynyl source, proceeded smoothly in CH(2)Cl(2) at room temperature to give the desired propargyl alcohol 3ca in almost quantitative yield after 5 h stirring. The characteristic feature of this new transformation involving no metal alkynides can be visualized by the fact that the alkynyl group bearing keto carbonyl was transferred successfully to aldehyde carbonyl without any side reactions on keto carbonyl. Although the use of (S)-1,1[prime or minute]-bi-2-naphthol and its simple analogues was found to be unsuitable for inducing asymmetry in this reaction, design of new chiral biphenols bearing a certain flexibility of the biphenyl axis led to satisfactory results in terms of enantioselectivity as well as reactivity.     

Synthesis of α-amino ketones from terminal alkynes via rhodium-catalyzed denitrogenative hydration of N-sulfonyl-1,2,3-triazoles

N-Sulfonyl-1,2,3-triazoles react with water in the presence of a rhodium catalyst to produce α-amino ketones in high yield. An intermediary α-imino rhodium(II) carbenoid undergoes insertion into the O-H bond of water. This transformation formally achieves 1,2-aminohydroxylation of terminal alkynes in a regioselective fashion when combined with the copper(I)-catalyzed 1,3-dipolar cycloaddition with N-sulfonyl azides.     

Hydroxylated surface of GaAs as a scaffold for a heterogeneous Pd catalyst

A novel use of GaAs, namely, as a scaffold for a heterogeneous palladium catalyst, is proposed. Hydroxy groups on the GaAs surface play important roles. During the adsorption of Pd(OAc)(2) on the GaAs surface, the hydroxy groups attract Pd(ii) species by anion exchange. A subsequent redox reaction proceeds to generate Pd(0) nanoparticles, which are stabilized on the GaAs surface. This process is confirmed by surface-sensitive measurements: diffuse reflection IR spectroscopy and X-ray photoelectron spectroscopy. Moreover, a more bulk-sensitive measurement, hard X-ray photoemission spectroscopy with synchrotron radiation, also supported our considerations. The amounts of Pd(0) nanoparticles on the surface were evaluated by catalytic activity, yield, and recyclability in the Heck reaction, in addition to the deposit test.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.     

Inducing a high twisted conformation in the polyimide structure by bulky donor moieties for the development of non-volatile memory

Two polyimides, PI(DAT-6FDA) and PI(DAPT-6FDA), from N-(2,4-diaminophenyl)-N,N-diphenylamine (DAT) or N-(4-(2′,4′-diaminophenoxy)phenyl-N,N-diphenylamine (DAPT) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) were prepared to clarify the structural effect on the resulting memory properties. The memory device based on PI(DAT-6FDA) showed an unstable volatile behavior, while the device based on PI(DAPT-6FDA) with a more bulky donor (D) unit exhibited a stable non-volatile FLASH type memory characteristic with a long retention time over 10⁴ s. The theoretical simulation based on the density functional theory (DFT) suggested that the greater distinct charge separation between the ground and charge transfer (CT) states led to a highly stable memory behavior. Also, it was clarified that PI(DAPT-6FDA) had a highly twisted conformation compared to PI(DAT-6FDA) in the ground state, and a more twisted dihedral angle between the D and acceptor (A) units was induced in the CT state, which led to the non-volatile memory characteristic.     

Self Organization and Redox Behavior of Poly(vinylferrocene)-block-Poly(isobutylene)-block-Poly(vinylferrocene) Triblock Copolymer †

Self organization and redox behavior of a ferrocene containing triblock copolymer, poly(vinylferrocene)-block-poly(isobutylene)-block-poly(vinylferrocene), with narrow molecular weight distribution in solutions and in thin films were investigated. Dynamic light scattering studies of the block copolymer in dilute solutions indicated that the polymer chains aggregated at relatively low concentrations. The aggregations of polymer chains were observed in toluene, as well as in tetrahydrofuran at concentrations as low as 0.014 mg/mL and 0.0045 mg/mL, respectively. Thin films of the copolymer showed reversible single electron redox behavior, similar to that of ferrocene. Morphology and micro-phase separation of the copolymer was analyzed by transmission electron microscopy.     

The structural changes in crystalline cellulose and effects on enzymatic digestibility

The enzymatic hydrolysis of cellulose I achieves almost complete digestion when sufficient enzyme loading as much as 20 mg/g-substrate is applied. However, the yield of digestion reaches the limit when the enzyme dosage is decreased to 2 mg/g-substrate. Therefore, we have performed three pretreatments such as mercerization, dissolution into phosphoric acid and EDA treatment. Transformation into cellulose II hydrate by mercerization and dissolution into phosphoric acid were not sufficient because substrate changed to highly crystalline structure during saccharification. On the other hand, in the case of crystalline conversion of cellulose I to III_I by EDA, almost perfect digestion was achieved even in enzyme loading as small as 0.5 mg/g-substrate, furthermore, hydrolyzed residue was typical cellulose I. The structural analysis of substrate after saccharification provides an insight into relationships between cellulose crystalline property and cellulase toward better enzymatic digestion.     

Effects of the acceptor conjugation length and composition on the electrical memory characteristics of random copolyimides

Resistive‐switching memories based on copolyimides (coPIs), PI‐NTCDIX and PI‐BTCDIX , with different compositions of 4,4′‐diamino‐4″‐methyltriphenylamine ( AMTPA ), 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, and N,N′‐bis‐(4‐aminophenyl)‐1,8:4,5‐naphthalenetetracarboxydiimide ( NTCDI ) or N,N′‐bis‐(4‐aminophenyl)‐1,2:4,5‐benzenetetracarboxydiimide ( BTCDI ) have been developed. By varying the feed ratio of monomers, PI‐NTCDIX and PI‐BTCDIX showed tunable optical and electronic properties through the charge transfer (CT) between AMTPA and NTCDI or BTCDI . The memory devices based on PI‐NTCDIX exhibited the tunable electrical bistability from the volatile dynamic random access memory to nonvolatile write once read many memory characteristics as the NTCDI composition increased. The OFF/ON electrical switching transition was mainly attributed to the CT mechanism for the charge separated high conductance, based on the analysis of model compounds and density functional theory calculation. Also, the volatility of the memory device depended on the stability of CT complex. The long conjugation and high electron affinity of the NTCDI moiety stabilized the radical anion generated in the CT complex and prevented the recombination of segregated radical species even through applying the high positive or negative voltage. On the other hand, the memory devices based on PI‐BTCDIX showed a rather unique behavior compared with those based on PI‐NTCDIX . At the low BTCDI composition, the device exhibited volatile memory property. However, no switching behavior was observed at the high BTCDI composition due to the low highest occupied molecular orbital energy level of BTCDI . Combining these results and our previous study on perylenebisimide ( PBI ), we concluded that memory characteristics could be tailored by changing the conjugation length ( PBI > NTCDI > BTCDI ) and the acceptor composition in random coPIs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and photoluminescence study of anthracene based dendrimer and dendron

A new type of polyaromatic dendrimer composed of six anthracene groups was synthesized, which showed a monomeric fluorescence feature with a diminished quantum yield due to intramolecular self-quenching processes in the dendritic framework.     

Synthesis of fluorinated materials catalyzed by proline or antibody 38C2 in ionic liquid

The utility of reusable ionic liquid-proline (or aldolase antibody 38C2) reaction system, proceeding the aldol reactions, is described. Further, obtained α-chloro-β-hydroxy compounds were transformed to the optically active α,β-epoxy carbonyl compounds. The aldolase antibody 38C2-ionic liquid system was able to reuse in Michael additions and the reaction of fluoromethylated imines.