Theoretical calculation of the steric effects of ortho substituents by the AM1 method

The AM1 calculation was done for ortho-substituted toluenes (o-X-C₆H₄-CH₃) and ortho-substituted tert-butylbenzenes (o-X-C₆H₄-t-Bu). The difference in the calculated heat of formation between o-X-C₆H₄-CH₃ and o-X-C₆H₄-t-Bu was used as a theoretical steric index for ortho-X. The correlation of this theoretical steric index with the empirical steric parameter sets such as our recently defined E_s(AMD) and the Taft–Kutter–Hansch (TKH) E_s was examined. In spite of the simplicity of the model system, the theoretical index was linear with the E_s(AMD) constant with a correlation coefficient of r = 0.972 for 17 substituents of various structures. Including the phenyl group, the correlation with the TKH E_s constant was r = 0.948. The theoretically calculated index was shown to serve as a measure of the ortho steric effect.     

Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Estimation of monomer reactivity ratios by nonlinear least-squares procedure with consideration of the weight of experimental data

To obtain the optimum values of the monomer reactivity ratios for the copolymerization systems with largely different reactivities between both monomers, a nonlinear least-squares procedure which took into account the weights of experimental data, was proposed and discussed. The weights of the data were treated for the errors arisen from the amounts of monomers charged, the densities of monomers, the weights of copolymer formed, and the composition of copolymer. The least-squares procedure with the consideration of the weights was applicable to both differentiated equation and integrated equation derived by Lewis and Mayo. This procedure was applied to radical copolymerizations of α-substituted crotonic esters with styrene, and reasonable monomer reactivity ratios were obtained. It was noted that errors from the copolymer composition were more important than those from the other factors and that the use of the integrated equation was recommended even when the copolymers were isolated at low conversions.     

Photodegradation behavior of tert-butyl vinyl ketone polymers and copolymers with styrene and α-methylstyrene

Photodegradation behavior of atactic and isotactic polymers of tert-butyl vinyl ketone (t-BVK) and its copolymers with styrene and α-methylstyrene was studied in dioxane as a solvent at room temperature. The quantum yield of main-chain scission of atactic poly(t-BVK) was found to be larger than that of isotactic poly(t-BVK) and atactic poly(methyl vinyl ketone). From the Stern-Volmer plots on the quenching study of atactic poly(t-BVK) with naphthalene and 2,5-dimethyl-2,4-hexadiene, it was found that 60–70% of its photochemical reaction underwent main-chain scission from the triplet state. It was also found that the increase in t-BVK contents of both copolymers accelerated the photodegradation, and the copolymer with styrene was more photodegradable than that with α-methylstyrene. These results seemed to suggest that the main-chain scission of these vinyl ketone polymers and copolymers proceeded through a Norrish type II photoelimination mechanism.     

Kinetic study of radical polymerization of dialkyl fumarates using electron spin resonance spectroscopy

The radical polymerization of dialkyl fumarates (DRF) bearing various ester alkyl groups was kinetically studied. The propagation and termination rate constants were determined using electron spin resonance (ESR) spectroscopy. The introduction of the bulky ester alkyl groups such as a tert-butyl group decreased the termination rate constant as expected. However, it has also been revealed that the bulky groups promote propagation despite the steric repulsion. The propagation rate and mechanism are discussed in relation to the propagation manner, i.e., tacticity of the polymer. © 1996 John Wiley & Sons, Inc.     

Noncovalent ligand-to-ligand interactions alter sense of optical chirality in luminescent tris(β-diketonate) lanthanide(III) complexes containing a chiral bis(oxazolinyl) pyridine ligand

Highly luminescent tris[β-diketonate (HFA, 1,1,1,5,5,5-hexafluoropentane-2,4-dione)] europium(III) complexes containing a chiral bis(oxazolinyl) pyridine (pybox) ligand--[(Eu(III)(R)-Ph-pybox)(HFA)(3)], [(Eu(III)(R)-i-Pr-pybox)(HFA)(3)], and [(Eu(III)(R)-Me-Ph-pybox)(HFA)(3)])--exhibit strong circularly polarized luminescence (CPL) at the magnetic-dipole ((5)D(0) → (7)F(1)) transition, where the [(Eu(III)(R)-Ph-pybox)(HFA)(3)] complexes show virtually opposite CPL spectra as compared to those with the same chirality of [(Eu(III)(R)-i-Pr-pybox)(HFA)(3)] and [(Eu(III)(R)-Me-Ph-pybox)(HFA)(3)]. Similarly, the [(Tb(III)(R)-Ph-pybox)(HFA)(3)] complexes were found to exhibit CPL signals almost opposite to those of [(Tb(III)(R)-i-Pr-pybox)(HFA)(3)] and [(Tb(III)(R)-Me-Ph-pybox)(HFA)(3)] complexes with the same pybox chirality. Single-crystal X-ray structural analysis revealed ligand-ligand interactions between the pybox ligand and the HFA ligand in each lanthanide(III) complex: π-π stacking interactions in the Eu(III) and Tb(III) complexes with the Ph-pybox ligand, CH/F interactions in those with the i-Pr-pybox ligand, and CH/π interactions in those with the Me-Ph-pybox ligand. The ligand-ligand interactions between the achiral HFA ligands and the chiral pybox results in an asymmetric arrangement of three HFA ligands around the metal center. The metal center geometry varies depending on the types of ligand-ligand interaction.     

Vinyl polymerization. 179. Effects of substituents on chain transfer reaction of substituted cumenes toward poly(methyl methacrylate) radical

In order to study the effects of substituents on the chain transfer reaction to cumenes, the polymerization of methyl methacrylate in a series of nuclear-substituted cumenes with α,α′-azobisisobutyronitrile as initiator was carried out at 60°C. and the chain transfer constants C were determined. The C values obtained for all substituted cumenes were greater than that (C₀) for unsubstituted cumene, regardless of the electronattracting or -repelling nature of the substituents. Hence the plot of log (C/C₀) against the Hammett σ constants gave no linear relationship. When the plots were made by the modified Hammett equation including resonance effect of the substituents: log (C/C) = ρσ + γE_R, however, a straight line with ρ = 0.03 and γ = 0.9 was obtained. From these results, it may be concluded that the effect of the substitutents on the chain transfer reactivities of cumenes toward attack of a poly(methyl methacrylate) radical is attributable mainly to the resonance contribution in the transition state. These results are also compared with those for polystyryl radical reported previously and discussed.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.