Comments on the primary and scatter dose-spread kernels used for convolution methods

The basic primary and scatter dose-spread kernels used for convolution methods are usually produced by Monte Carlo simulations with the interaction point forced to the center of a large water phantom. However, it is still not clear whether such Monte Carlo based kernels allow accurate dose calculations with a wide range of field sizes and depths, especially in thorax phantoms. Using the differential primary and scatter concept, this paper proposes another type of basic kernel, with which perfectly accurate primary and scatter absorbed dose calculations can be performed under conditions that the beam is parallel, the incident beam intensity is uniform within and zero outside the field, and the primary beam attenuation coefficient along raylines is not a function of depth and off-axis distance.     

Photochemical aromatic hydroxylation by aromatic amine N-oxides: remarkable solvent effect on NIH-shift

Photooxygenations of 4-²H-anisole ($\text{3}$) and o-xylene ($\text{5}$) by 3-methylpyridazine 2-oxide ($\text{1}$) or pyridine 1-oxide ($\text{2}$) were studied in a variety of solvents at varying irradiation temperatures. Remarkable solvent effect on NIH-shift coupled with their hydroxylation processes was observed.     

Removal of fine powders from film surface. I. Effect of electrostatic force on the removal efficiency

A novel fine particle removal system composed of a corona-discharge neutralizer, a pulse-jet air unit and an image processing system has been developed. First of all, adhesion force between particle and film was directly measured and effect of electrostatic force on the adhesion force was calculated experimentally and theoretically. The electrostatic force was found to be significant, leading to the suggestion that the countermeasure for the electrostatic force was required to effectively remove fine particles. This system was then applied to the removal of fine particles from surface of a gelatin film used for conventional capsule material. The number of particles removed by the system was calculated by an image processing system and number base removal efficiency was computed with and without the elimination of electrostatic charge by the neutralizer. It was found that the difference between the removal efficiency of particles with elimination of electrostatic charge and that of without the elimination showed linear relationship with the electrostatic adhesion force. The data confirmed the necessity of electrostatic charge elimination for the effective removal of fine particles.     

Synthesis of large macrocyclic tetraaza compounds with a methylene backbone: Cyclo[-NH- (CH2)n-]4, (n = 6, 7, 8, 9 and 10). The formation of 28-, 32-, 36-, 40- and 44-membered rings

A series of macrocyclic tetraamines with 28-, 32-, 36-, 40- and 44-membered rings have been efficiently prepared from the corresponding ditosylamide and monobromoalcohol derivatives in 6 steps via a double condensation reaction. Overall yields were: 41, 41, 46, 29, and 33%, respectively, for 1,8,15,22-tetraazacyclooctacontane ( 11a ), 1,9,17,25-tetraazacyclodotriacontane ( 11b ), 1,10,19,28-tetraazacyclohexatriacontane ( 11c ), 1,11,21,31-tetraazacyclotetracontane ( 11d ) and 1,12,23,34-tetraazacyclotetratetracontane ( 11e ).     

An ESR study of radiation damage of bisphenol-A-based epoxy resin at low temperature: Selective hydrogen addition to benzene-ring-forming cyclohexadienyl-type radical

In the γ-irradiated aromatic epoxy resin, diglycidylether of bisphenol A cured with diaminodiphenylmethane, the cyclohexadienyl-type radical is produced as one of the main radical species. Although both the resin and the hardener contain benzene rings, it is concluded that the cyclohexadienyl-type radical is formed by selective addition of the OH hydrogen to the benzene ring on the resin side. The selectivity is accounted for in terms of electron capture by the benzene ring followed by proton transfer from the OH group which is located in front of the benzene ring. This reaction scheme is further supported by the effect of the addition of an electron scavenger on the radical yield as well as by the photobleaching behavior of the radicals involved.     

Studies on antiallergic agents. I. Synthesis and antiallergic activity of novel pyrazine derivatives.

Various pyrazine derivatives were synthesized and their antiallergic activity was examined. The inhibitory activity on allergic histamine release of the compounds bearing a 5-tetrazolyl group was more potent than that of the corresponding carboxyl derivatives. The introduction of -CONH- or -NHCO- between the pyrazine ring and the 5-tetrazolyl group as a spacer greatly enhanced the activity. N-(1H-Tetrazol-5-yl)-2-pyrazinecarboxamide (I-3) was estimated to exhibit nearly the same potency as disodium cromoglycate (DSCG). The structure-activity relationship among various derivatives modified by introducing some substituents onto the 3-, 5- or 6-position of the pyrazine ring of I-3 was investigated. The activity remained unchanged or was reduced when such substituents as methyl, chloro, methoxy, methylamino and dimethylamino were introduced at the 3- or 5-position. In contrast, 6-substitution with various alkylamino groups more or less increased the activity. Among them, the 6-dimethylamino (I-17c) and 6-(1-pyrrolidinyl) (I-34) derivative were proved to be most potent. The IC50 values (concentration which produces 50% inhibition of the allergic histamine release) of I-17c and I-34 were determined to be 4.7 x 10(-10) and 4.6 x 10(-10) M, respectively. These two compounds produced a potent inhibitory activity on passive cutaneous anaphylaxis (PCA) in rat, not only by the intravenous route (ED50 = 0.0096 mg/kg for both compounds) but also by the oral route (ED50 = 0.19 and 0.18 mg/kg, respectively). On the other hand, when the pyrazine ring of some representative compounds was replaced with a pyridine ring, the inhibitory activity on histamine release was significantly reduced.     

Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).     

Structure-activity relationship (SAR) studies on oxazolidinone antibacterial agents. 1. Conversion of 5-substituent on oxazolidinone

A structure-activity relationship (SAR) study on 5-substituted oxazolidinones as an antibacterial agent is described. The oxazolidinones, of which 5-acetylaminomethyl moiety was converted into other functions, were prepared and evaluated for antibacterial activity. Elongation of the methylene chain (8) and conversion of the acetamido moiety into guanidino moiety (12) decreased the antibacterial activity. The replacement of carbonyl oxygen (=O) by thiocarbonyl sulfur (=S) enhanced in vitro antibacterial activity. Especially, compound 16, which had the 5-thiourea group, showed 4-8 stronger in vitro activity than linezolid. Our SAR study revealed that the antibacterial activity was greatly affected by the conversion of 5-substituent.     

Synthesis and reactivities of 10-S-3 trithiadiazapentalene derivatives

1,3-Bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidinethiones 3a-f reacted with bromine to give trithiadiazapentalene derivatives 5a-f , bearing the exocyclic C-N double bonds, in moderate yields. The molecular structure of 5b was elucidated by the X-ray crystallographic analysis. The treatment of 5b-f with hydrochloric acid gave the ring-opening products, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazo-lidinones 9b-f , accompanied by the production of elemental sulfur. Reduction of 5b , 5d , and 5e with sodium borohydride gave the ring-opening compounds, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidines 13b , 13d , and 13e respectively.     

Contracted polarization functions for B to Ar

Using optimal exponents for B through Ne given by Dunning and those for Al through Ar by Woon and Dunning, d-type contracted polarization functions (2d/1d), (3d/1d), and (3d/2d) are generated from natural orbitals of atomic single and double excitation configuration interaction (SDCI) calculations, where the numbers before and after the slash are those of the primitive and contracted Gaussian type functions. The resulting contracted functions are tested on N₂ and P₂ molecules by self-consistent field and SDCI calculations, which clarify characteristics of the present polarization functions. Received: 5 June 1997 / Accepted: 20 August 1997