Flux decline behaviors in dead-end microfiltration of activated sludge and its supernatant

The properties of dead-end microfiltration were explored under constant pressure using two types of activated sludge controlled under the condition of different air flow rates. The activated sludge cultured at the air flow rate of 0.15 L min⁻¹ (the anaerobic condition) exhibited a significant flux decline compared with the case of the air flow rate of 2.33 L min⁻¹ (the aerobic condition). It was found from the results of microfiltration of the supernatant separated by centrifugation that the constituents in the supernatant caused a major cake resistance in microfiltration of the activated sludge. The average specific filtration resistance for filtration of the activated sludge was closely consistent with that for filtration of the supernatant at low pressure (49 kPa). However, the cake resistance of the microbial floc in microfiltration of the activated sludge became substantial with increasing filtration pressure because of high compressibility of the microbial floc. Moreover, the foulant and the fouling mechanism in microfiltration of the supernatant were evaluated from both microfiltration test of the supernatant and microfiltration test of the filtrate collected thereby. As a result, the effects of the pore size and material of the microfiltration membrane on the flux decline behaviors in dead-end microfiltration were reasonably elucidated.     

The mutagenic constituents of Rubia tinctorum.

Twenty compounds were isolated from the roots of Rubia tinctorum which are used as a commercial source of madder color. Among these compounds, mollugin (1), 1-hydroxy-2-methylanthraquinone (2), 2-ethoxymethylanthraquinone(11), rubiadin (13), 1,3-dihydroxyanthraqunone (14), 7-hydroxy-2-methylanthraquinone (16), lucidin (17), 1-methoxymethylanthraquinone (18) and lucidin-3-O-primeveroside (19) showed mutagenicity with Salmonella typhimurium TA 100 and/or TA 98. Since the mutagenic compounds isolated are anthraquinone derivatives with the exception of compound 1, structure-mutagenicity relationships of the anthraquinones were also studied. The results suggested that the greatest activity is exhibited by 1,3-dihydroxyanthraquinones possessing methyl or hydroxylmethyl group on carbon 2.     

Synthesis of 2′-O-[2-[(N,N-dialkylamino)oxy]ethyl]-modified oligonucleotides: hybridization affinity, resistance to nuclease, and protein binding characteristics

Synthesis of a series of 2′-O-[2-[(N,N-dialkylamino)oxy]ethyl]-modified 5-methyluridine nucleoside phosphoramidites and solid supports are described. Using these monomers, modified oligonucleotides containing phosphodiester linkages were synthesized in high yields. These modified oligonucleotides showed enhanced binding affinity to the complementary RNA (and not to DNA) and excellent nuclease stability with t_1/2>24 h. The human serum albumin binding properties of modified oligonucleotides have been evaluated to assess their transport and toxicity properties.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Direct observation of adduct formation of alkyl and aromatic iodides with cl atoms using cavity ring-down spectroscopy

The reactions of Cl atoms with RI (R = n-C3H7, n-C4H9, cyclo-C6H11, C6H5, C6F5, and p-CH3C6H4) have been studied using cavity ring-down spectroscopy at a temperature range of 233-313 K and at 100 Torr total pressure of N2 diluent. Visible absorption spectra of the RI-Cl adducts were recorded at 440-520 nm at 263 K. The yields of the adducts were temperature-dependent. There was no discernible reaction of the adducts in the presence of 100 Torr of O2 at 263 K. Theoretical calculations were performed for C4H9I-Cl and C6H5I-Cl for quantitative explanation of the absorption spectra and the strength of the I-Cl bonds in the charge-transfer complexes. Evidence for the adduct formation following the reaction of Cl with C6H5Br was sought but not found at 440 and 520 nm.     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

On the duality and the derivation relations for multiple zeta values

We consider the problem of deducing the duality relation from the extended double shuffle relation for multiple zeta values. Especially we prove that the duality relation for double zeta values and that for the sum of multiple zeta values whose first components are 2’s are deduced from the derivation relation, which is known as a subclass of the extended double shuffle relation.     

Synthesis of Novel Spiro[indol-2,2′-pyrroles] Using Isocyanide-Based Multicomponent Reaction

An efficient and facile method for the synthesis of novel spiro[indole-2,2′-pyrroles] from N-methyl-3-isatin imines, t-butyl isocyanide, and dialkyl acetylenedicarboxylate has been achieved by [3 + 2] cyclo addition reaction. All the products were purified by column chromatography as yellow solids and confirmed with ¹H NMR, ¹³C NMR, fast atom bombardment, mass, and infrared. Compound 11 was further confirmed with x-ray analysis.     

Invited Lecture. Ferroelectric liquid crystalline polymers and related model compounds with a low–moderate degree of polymerization

Abstract

Ferroelectric liquid crystalline polymers (FLCPs) with a low-moderate degree of polymerization were synthesized. These had a comb structure; the main chain was polyacrylate and the side chain consisted of a flexible spacer, a core and an optically active chiral end group. They exhibited electro-optic switching times ranging from a few milliseconds to a few seconds in the S*_c phase. As the molecular weight M _n increased, the range of the S*_c shifted to higher temperatures. At a given temperature, the switching time increased with M _n .

Spontaneous polarizations P _s , apparent cone angles 2θ, electro-optic switching times τ and rotational viscosities η of some polyoxyethylene FLCPs and corresponding low molecular weight ferroelectric liquid crystal materials (FLCs) were also measured. This is the first report of polyoxyethylene FLCPs. There was no significant difference in P _s and 2θ, which shows that the arrangement of the side chains in the FLCP is similar to that of the molecules in ordinary FLC. On the contrary, τ and η for the FLCPs were 10²–10³ times as large as those for FLCs. The rotational viscosity of the FLCP was mainly dependent on the side chain structure rather than on the spacer. Therefore collisions between adjacent side chains cause large η values in FLCPs rather than hindrance to side chain gyration due to the spacer group. By combining FLCPs with ITO-coated plastic substrates, a large area matrix driven display has been made. Although an improvement in switching time is still needed, a flexible and lightweight display like a sheet of paper will be available in the near future.