Analysis of multiple mycotoxins in beer employing (ultra)-high-resolution mass spectrometry

The objective of the presented study was to develop and optimize a simple, high-throughput method for the control of 32 mycotoxins (Fusarium and Alternaria toxins, aflatoxins, ergot alkaloids, ochratoxins, and sterigmatocystin) in beer. Due to the broad range of their physicochemical properties, the sample preparation step was simplified as much as possible to avoid analyte losses. The addition of acetonitrile to beer samples enabled precipitation of abundant matrix components. The clean-up efficiency was controlled by ambient mass spectrometry employing a direct analysis in real time (DART) ion source. For determination of analytes, ultra-high-performance liquid chromatography hyphenated with high-resolution mass spectrometry utilizing an orbitrap (U-HPLC-orbitrapMS) or time-of-flight (TOFMS) technology was used. Because of significantly better detection capabilities of the orbitrap technology, the U-HPLC-orbitrapMS method was chosen as a determinative step and fully validated. To compensate matrix effects, matrix-matched calibration was employed. The lowest calibration levels for most of the target mycotoxins ranged from 1 to 8 μg L(-1) beer and the recoveries of analytes were in range from 86 to 124%.     

Heats of formation of C(6)H(5)(•), C(6)H(5)(+), and C(6)H(5)NO by threshold photoelectron photoion coincidence and active thermochemical tables analysis

Threshold photoelectron photoion coincidence has been used to prepare selected internal energy distributions of nitrosobenzene ions [C(6)H(5)NO(+)]. Dissociation to C(6)H(5)(+) + NO products was measured over a range of internal energies and rate constants from 10(3) to 10(7) s(-1) and fitted with the statistical theory of unimolecular decay. A 0 K dissociative photoionization onset energy of 10.607 ± 0.020 eV was derived by using the simplified statistical adiabatic channel model. The thermochemical network of Active Thermochemical Tables (ATcT) was expanded to include phenyl and phenylium, as well as nitrosobenzene. The current ATcT heats of formation of these three species at 0 K (298.15 K) are 350.6 (337.3) ± 0.6, 1148.7 (1136.8) ± 1.0, and 215.6 (198.6) ± 1.5 kJ mol(-1), respectively. The resulting adiabatic ionization energy of phenyl is 8.272 ± 0.010 eV. The new ATcT thermochemistry for phenyl entails a 0 K (298.15 K) C-H bond dissociation enthalpy of benzene of 465.9 (472.1) ± 0.6 kJ mol(-1). Several related thermochemical quantities from ATcT, including the current enthalpies of formation of benzene, monohalobenzenes, and their ions, as well as interim ATcT values for the constituent atoms, are also given.     

Nuclear magnetic relaxation induced by exchange-mediated orientational randomization: Longitudinal relaxation dispersion for spin I = 1

The frequency dependence of the longitudinal relaxation rate, known as the magnetic relaxation dispersion (MRD), can provide a frequency-resolved characterization of molecular motions in complex biological and colloidal systems on time scales ranging from 1 ns to 100 μs. The conformational dynamics of immobilized proteins and other biopolymers can thus be probed in vitro or in vivo by exploiting internal water molecules or labile hydrogens that exchange with a dominant bulk water pool. Numerous water (1)H and (2)H MRD studies of such systems have been reported, but the widely different theoretical models currently used to analyze the MRD data have resulted in divergent views of the underlying molecular motions. We have argued that the essential mechanism responsible for the main dispersion is the exchange-mediated orientational randomization (EMOR) of anisotropic nuclear (electric quadrupole or magnetic dipole) couplings when internal water molecules or labile hydrogens escape from orientationally confining macromolecular sites. In the EMOR model, the exchange process is thus not just a means of mixing spin populations but it is also the direct cause of spin relaxation. Although the EMOR theory has been used in several studies to analyze water (2)H MRD data from immobilized biopolymers, the fully developed theory has not been described. Here, we present a comprehensive account of a generalized version of the EMOR theory for spin I = 1 nuclides like (2)H. As compared to a previously described version of the EMOR theory, the present version incorporates three generalizations that are all essential in applications to experimental data: (i) a biaxial (residual) electric field gradient tensor, (ii) direct and indirect effects of internal motions, and (iii) multiple sites with different exchange rates. In addition, we describe and assess different approximations to the exact EMOR theory that are useful in various regimes. In particular, we consider the experimentally important dilute regime, for which approximate analytical results are derived. As shown by the analytical expressions, and confirmed by exact numerical calculations, the dispersion is governed by the pure nuclear quadrupole resonance frequencies in the ultraslow-motion regime, where the relaxation rate also exhibits a much stronger dependence on the electric field gradient asymmetry than in the motional-narrowing regime.     

Use of 19F NMR spectroscopy to screen chemical libraries for ligands that bind to proteins

Identification of compounds from chemical libraries that bind to macromolecules by use of NMR spectroscopy has gained increasing importance during recent years. A simple methodology based on (19)F NMR spectroscopy for the screening of ligands that bind to proteins, which also provides qualitative information about relative binding strengths and the presence of multiple binding sites, is presented here. A library of fluorinated compounds was assembled and investigated for binding to the two bacterial chaperones PapD and FimC, and also to human serum albumin (HSA). It was found that library members which are bound to a target protein could be identified directly from line broadening and/or induced chemical shifts in a single, one-dimensional (19)F NMR spectrum. The results obtained for binding to PapD using (19)F NMR spectroscopy agreed well with independent studies based on surface plasmon resonance, providing support for the versatility and accuracy of the technique. When the library was titrated to a solution of PapD chemical shift and linewidth changes were observed with increasing ligand concentration, which indicated the presence of several binding sites on PapD and enabled the assessment of relative binding strengths for the different ligands. Screening by (19)F NMR spectroscopy should thus be a valuable addition to existing NMR techniques for evaluation of chemical libraries in bioorganic and medicinal chemistry.     

Alkyloxycarbonyl group migration in furanosides

A migration of methyloxycarbonyl group from secondary to primary hydroxyl was observed in furanosides (ribosides and xylosides) under usual desilylation conditions using tetrabutylammonium fluoride. The migration was studied further on several alkyloxycarbonyl furanosides under either basic or acidic conditions. As follows from ¹³C labelling experiments and product distribution, the migration in xylosides, proceeds intramolecularly via six-membered cyclic carbonate, whereas in ribosides, the migration is intermolecular. Acidic conditions prevented the migration in ribosides whereas the migration in xylosides was circumvented under neutral conditions.     

Self-Assembling Sieves

A modular strategy has been applied to synthesize large, porous, self-assembling capsules. The coupling of tricyclic building blocks incorporating glycoluril hydrogen-bonding units and derivatives of triethylbenzene produces monomers which readily form homo- and heterodimeric assemblies (calculated structure is shown). Large guests can be trapped while small solvent molecules flow freely through the pores of the capsules.     

Cooperativity, partially bound states, and enthalpy-entropy compensation

Efforts to develop a quantitative understanding of molecular recognition rely on the additivity of individual intermolecular interactions, and cooperativity represents one of the major potential stumbling blocks. A chemical double-mutant cycle has been used to experimentally measure cooperativity between functional group interactions within a complex framework. The interaction between two aromatic groups varies by 0.2 +/- 0.4 kJ mol(-1) in synthetic H-bonded complexes that differ by 8-13 kJ mol(-1) in overall stability. In these systems, the free energies associated with individual intermolecular interactions can therefore be reliably treated in an additive fashion. The results suggest that alternative explanations should be considered for cooperative phenomena observed in other systems, and a rationale based on the population of partially bound states in flexible molecules is proposed to account for the enthalpic chelate effect and enthalpy-entropy compensation.     

Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.     

Ozonolysis of a Series of Methylated Alkenes: Reaction Rate Coefficients and Gas‐Phase Products

The gas‐phase ozonolysis of three methylated alkenes, i.e., trans‐2,2‐dimethyl‐3‐hexene (22dM3H), trans‐2,5‐dimethyl‐3‐hexene (25dM3H), and 4‐methyl‐1‐pentene (4M1P), has been investigated in the presence of sufficient hydroxyl radical scavenger in a laminar flow reactor at ambient temperature (296 ± 2 K) and P = 1 atm of dry air (RH ≤ 5%). Ozone levels in the reactor were monitored by an automatic analyzer. Alkene and gas‐phase product concentrations were determined via online sampling either on three‐bed adsorbent cartridges followed by thermodesorption and GC/FID‐MS analysis or on 2,4‐dinitrophenylhydrazine (DNPH) cartridges for subsequent HPLC/UV analysis. Reaction rate coefficients of (3.38 ± 0.12) × 10^?17 for 22dM3H and (2.71 ± 0.26) × 10^?17 for 25dM3H, both in cm³ molecule^?1 s^?1 units, have been obtained under pseudo–first‐order conditions. Primary carbonyl products have been identified for the three investigated alkenes, and branching ratios are reported. In the case of 4M1P ozonolysis, the yield of a Criegee intermediate was indirectly determined. Kinetics and product study results are compared to those of literature when available. This work represents the first investigation of reaction products in the ozonolysis of 22dM3H, 25dM3H, and 4M1P in a flow reactor.     

<Emphasis Type="Italic">Gluconobacter</Emphasis> sp. cells for manufacturing of effective electrochemical biosensors and biofuel cells

Gluconobacter oxydans bacteria exhibit a unique metabolism for quick and incomplete oxidation of a wide range of different compounds (aldoses, ketoses, mono- and poly-alcohols, etc.). Such biotransformation efficiency with simple biomass production led to the industrial applications of these bacteria in the production of several important commodities. Their respiratory activity can also be successfully studied and used in the field of bioelectrochemistry. The main aim of this review is to present various strategies to improve selectivity of assays using intact/treated cells of G. oxydans, to introduce the application of G. oxydans-based biosensors in selective monitoring of analytes during biotransformation processes and to provide information about utilizable sugars in fermentation media or in biological oxygen demand value determination. The final part of the review describes potential application of G. oxydans cells in the generation of electricity from complex fuels within microbial fuel cells by advanced direct electron transfer route between bacterial cells and electrodes.