Proton transfer reaction ion trap mass spectrometer

Proton transfer reaction mass spectrometry is a relatively new field that has attracted a great deal of interest in the last few years. This technique uses H(3)O(+) as a chemical ionization (CI) reagent to measure volatile organic compounds (VOCs) in the parts per billion by volume (ppbv) to parts per trillion by volume (pptv) range. Mass spectra acquired with a proton transfer reaction mass spectrometer (PTR-MS) are simple because proton transfer chemical ionization is "soft" and results in little or no fragmentation. Unfortunately, peak identification can still be difficult due to isobaric interferences. A possible solution to this problem is to couple the PTR drift tube to an ion trap mass spectrometer (ITMS). The use of an ITMS is appealing because of its ability to perform MS/MS and possibly distinguish between isomers and other isobars. Additionally, the ITMS duty cycle is much higher than that of a linear quadrupole so faster data acquisition rates are possible that will allow for detection of multiple compounds. Here we present the first results from a proton transfer reaction ion trap mass spectrometer (PTR-ITMS). The aim of this study was to investigate ion injection and storage efficiency of a simple prototype instrument in order to estimate possible detection limits of a second-generation instrument. Using this prototype a detection limit of 100 ppbv was demonstrated. Modifications are suggested that will enable further reduction in detection limits to the low-ppbv to high-pptv range. Furthermore, the applicability of MS/MS in differentiating between isobaric species was determined. MS/MS spectra of the isobaric compounds methyl vinyl ketone (MVK) and methacrolein (MACR) are presented and show fragments of different mass making differentiation possible, even when a mixture of both species is present in the same sample. However, MS/MS spectra of acetone and propanal produce fragments with the same molecular masses but with different intensity ratios. This allows quantitative distinction only if one species is predominant. Fragmentation mechanisms are proposed to explain the results.     

Synthesis of beta-lactams from a N-rhenaimine: effect of the transition metal on the energetic profile of the Staudinger reaction

As depicted in the scheme, the alkylidenamido complex 1, a N-rhenaimine, reacts with ketenes to afford the beta-lactams 2-4, which possess a {Re(CO)3(bpy)} fragment as substituent at nitrogen. Clean demetalations using HOTf or MeOTf yield the free beta-lactams or N-methyl-beta-lactams along with [Re(OTf)(CO)3(bpy)]. DFT calculations help to rationalize why the reaction is faster than those of non transition metal N-substituted imines.     

Magnesium iodide–4,4′‐bipyridine–water (1/3/4) and strontium iodide–4,4′‐bipyridine–propan‐1‐ol (1/2.5/2)

Both of the title compounds, catena‐poly­[[[tetra­aqua­magnesium(I)]‐μ‐4,4′‐bi­pyridine‐κ²N:N′] diiodide bis(4,4′‐bi­pyridine) solvate], {[Mg(C₁₀H₈N₂)(H₂O)₄]I₂·2C₁₀H₈N₂}_n, (I), and catena‐poly­[[[μ‐4,4′‐bi­pyridine‐bis­[di­iodo­bis­(propan‐1‐ol)­strontium(I)]]‐di‐μ‐4,4′‐bi­pyridine‐κ⁴N:N′] bis(4,4′‐bi­pyri­dine) solvate], {[Sr₂I₄(C₁₀H₈N₂)₃(C₃H₈O)₄]·2C₁₀H₈N₂}_n, (II), are one‐dimensional polymers which are single‐ and double‐stranded, respectively, the metal atoms being linked by the 4,4′‐bi­pyridine moieties. The Mg complex, (I), is [cis‐{(H₂O)₄Mg(N‐4,4′‐bi­pyridine‐N′)_(2/2)}]_(∞|∞)I₂·4,4′‐bi­pyridine and Mg has a six‐coordinate quasi‐octahedral coordination environment. The Sr complex, (II), is isomorphous with its previously defined Ba counterpart [Kepert, Waters & White (1996). Aust. J. Chem. 49 , 117–135], being [(propan‐1‐ol)₂I₂Sr(N‐4,4′‐bi­pyridine‐N′)_(3/2)]_(∞|∞)·4,4′‐bi­pyridine, with the I atoms trans‐axial in a seven‐coordinate pentagonal–bipyramidal Sr environment.     

One-pot two-step microwave-assisted reaction in constructing 4,5-disubstituted pyrazolopyrimidines

[reaction: see text] A microwave-assisted reaction was developed to facilitate the construction of 4,5-disubstituted pyrazolopyrimidines. This one-pot two-step process involves a sequential S(N)Ar displacement of the C4 chloro substituent with various anilines and amines, followed by a Suzuki coupling reaction with different boronic acids. Using microwave irradiation leads to high product conversion, low side product formation, and shorter reactions.     

Laser-Induced Azomethine Ylide Formation and Its Covalent Entrapment by Fulleropyrrolidine Derivatives During MALDI Analysis

Two novel monofunctionalized fulleropyrrolidine derivatives (Prato adducts) were prepared and characterized by matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). MALDI experiments conducted in the positive-ion mode on pure and mixed samples of both monofunctionalized fullerene derivatives revealed the efficient formation of bisadducts (in the case of the pure samples) and mixed bisadducts (in the case of a mixed sample). Bisadducts were not observed in the ESI experiments and thus not present in the sample. A mechanism for the MALDI formation of these bisadduct ions is proposed in which an azomethine ylide fragment is formed in situ from the monofunctionalized fulleropyrrolidine species upon laser irradiation. This fragment, which can survive as an intact moiety in the gas phase in the special environment provided by the MALDI experiment, is then able to attach to a fulleropyrrolidine monoadduct which acts as a dipolarophile, thus leading to the formation of a bisadduct fullerene derivative. The unprecedented re-attachment of the azomethine ylide implies that the establishment of the ligand attainment of Prato adducts based on MALDI analysis alone can lead to wrong assignments.

Pressure effect on heterogeneous trifluoromethylation of fullerenes and its application

The first systematic study of heterogeneous fullerene trifluoromethylation using an innovative gradient-temperature gas-solid reactor revealed a significant effect of CF₃I pressure on the conversion of C₆₀ and C₇₀ into trifluoromethylated products and on the range of fullerene(CF₃)_n compositions that were obtained. The design of the reactor allowed us to lower the residence times of fullerene(CF₃)_n species in the hot zone which resulted in the significant differences in relative isomeric distributions as compared to the earlier methods. For the first time, gram quantities of trifluoromethylated fullerenes were prepared using the new reactor, and the selective synthesis of a single-isomer C₆₀(CF₃)₂ was developed. The relative reactivity of C₇₀ as a CF₃ radical scavenger was found to be much lower than that of C₆₀, especially at an early radical addition stage, which led to the cost-efficient synthesis of C₆₀(CF₃)₂ from a fullerene extract.     

Synthesis of subphthalocyanines as probes for the accessibility of silica nanochannels

The synthesis of a new subphthalocyanine is reported. Its structural and photophysical properties are ideal for probing the accessibility of arrays of silica nanochannels.     

Observation of bi-polarons in blends of conjugated copolymers and fullerene derivatives

From a fundamental and application point of view it is of importance to understand how charge carrier generation and transport in a conjugated polymer (CP):fullerene blend are affected by the blend morphology. In this work light-induced electron spin resonance (LESR) spectra and transient ESR response signals are recorded on non-annealed and annealed blend layers consisting of alkyl substituted thieno[3,2-b]thiophene copolymers (pATBT) and the soluble fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) at temperatures ranging from 10 to 180 K. Annealing of the blend sample leads to a reduction of the steady state concentration of light-induced PCBM anions within the blend at low temperatures (T = 10 K) and continuous illumination. This is explained on the basis of the reducing interfacial area of the blend composite on annealing, and the high activation energy for electron diffusion in PCBM blends leading to trapped electrons near the interface with the CP. As a consequence, these trapped electrons block consecutive electron transfer from an exciton on a CP to the PCBM domain, resulting in a relatively low concentration charge carriers in the annealed blend. Analysis of the transient ESR data allows us to conclude that in annealed samples diamagnetic bi-polaronic states on the CPs are generated at low temperature. The formation of these states is related to the generation and interaction of multiple positive polarons in the large crystalline polymer domains present in the annealed sample.