Pump−probe experiments at the TEMPO beamline using the low‐α operation mode of Synchrotron SOLEIL

The SOLEIL synchrotron radiation source is regularly operated in special filling modes dedicated to pump–probe experiments. Among others, the low‐α mode operation is characterized by shorter pulse duration and represents the natural bridge between 50 ps synchrotron pulses and femtosecond experiments. Here, the capabilities in low‐α mode of the experimental set‐ups developed at the TEMPO beamline to perform pump–probe experiments with soft X‐rays based on photoelectron or photon detection are presented. A 282 kHz repetition‐rate femtosecond laser is synchronized with the synchrotron radiation time structure to induce fast electronic and/or magnetic excitations. Detection is performed using a two‐dimensional space resolution plus time resolution detector based on microchannel plates equipped with a delay line. Results of time‐resolved photoelectron spectroscopy, circular dichroism and magnetic scattering experiments are reported, and their respective advantages and limitations in the framework of high‐time‐resolution pump–probe experiments compared and discussed.     

Intraoperative contrast-enhanced MR-imaging as predictor of tissue damage during cryoablation of porcine liver

This study evaluate intraoperative Magnetic Resonance Imaging (MRI) as predictor of tissue damage following cryoablation of porcine liver with and without concomitant hepatic vascular inflow occlusion.Inflow occlusion was used during freezing in 6 of 12 pigs included. The volumes of the procedural ice-balls were estimated from MR images. Immediately after thawing contrast (MnDPDP) enhanced MRI was performed to estimate the volume of the cryolesion. Four days after ablation MRI was repeated of the in-vivo and the ex-vivo liver. Photography was performed of the sliced liver specimens to estimate the volumes of the lesions. The intraoperative volume of the cryolesion as shown by contrast enhanced MRI corresponded well to the ice-ball volume for lesions made without vascular occlusion (difference 0.3 +/- 0.9 cm(3), p = 0.239). For lesions made during occlusion the volume of the intraoperative cryolesion was larger than the corresponding ice-ball (difference 7.5 +/- 3.3 cm(3), p = 0.003). The volume of the cryolesions as estimated from histopathology four days after freezing and contrast enhanced MRI immediately after freezing corresponded well for lesions made with (difference -2.6 +/- 4.5 cm(3), p = 0.110) and without vascular occlusion (difference -0.5 +/- 2.3 cm(3), p = 0.695).Intraoperative MnDPDP-enhanced MRI of the cryolesion is predictive of the tissue damage induced during cryoablation of porcine liver. The procedural ice-ball is not, if induced during inflow occlusion.     

Low-temperature photoluminescence spectra of CdO–In2O3 thin films prepared by sol–gel

(CdO)_1?x–(InO_3/2)_x thin films were deposited on glass substrates by the sol–gel method. The precursor solutions for the mixed oxide films were obtained from the mixture of the precursor solutions for CdO and In₂O₃ prepared separately. The investigated In atomic concentrations in the solution, x, were 0.0, 0.16, 0.33, 0.50, 0.67, 0.84, and 1. X-ray diffraction measurements showed that the films were mainly constituted of CdO, In₂O₃, and CdIn₂O₄. CdO and In₂O₃ were obtained for x=0 and 1, respectively. For x=0.67, which is the stoichiometric composition of the CdIn₂O₄ compound, only this oxide was formed. CdO and CdIn₂O₄ crystals were obtained in the Cd-rich region, whereas In₂O₃ and CdIn₂O₄ crystals were formed in the In-rich region. The PL spectra at 15 K for CdO showed the presence of two main emission bands at energies close to 2.2 and 3.0 eV. A blue-shift of these bands took place for increasing In concentration, which is related to the increase in the band gap energy of the mixed system in going from CdO, with a band gap energy of 2.46 eV, to CdIn₂O₄, with 3.2 eV, to In₂O₃, with 3.6 eV.     

Modification of terminating species and band alignment at the interface between alumina films and metal single crystals

Thin epitaxial alumina films were grown on Cu(111), Cu–9 at.%Al(111), Ni(111) and NiAl(110) single crystals. The alumina films grew in such a manner that hexagonal or pseudo-hexagonal oxygen lattices were parallel to the surface of the substrates. Photoelectron spectra were obtained either with synchrotron or Al K-alpha radiation. We measured Al 2p spectra and determined the atomic species that terminated the interface between the alumina films and the substrates. The influence of Al in the substrates on the species that terminated the interface has been discussed based on thermodynamics. From valence band spectra, p-type Schottky barrier height (energy difference between the Fermi level of the metallic substrates and the valence band maximum of the alumina films, band offset) was determined. Differences in interface terminating species resulted in variations in p-type Schottky barrier height, or band alignment.     

Offline and online capillary electrophoresis enzyme assays of β-N-acetylhexosaminidase

Enzyme assays of β-N-acetylhexosaminidase from Aspergillus oryzae using capillary electrophoresis in the offline and online setup have been developed. The pH value and concentration of the borate-based background electrolyte were optimized in order to achieve baseline separation of N,N′,N″-triacetylchitotriose, N,N′-diacetylchitobiose, and N-acetyl-d-glucosamine. The optimized method using 25 mM tetraborate buffer, pH 10.0, was evaluated in terms of repeatability, limits of detection, quantification, and linearity. The method was successfully applied to the offline enzyme assay of β-N-acetylhexosaminidase, which was demonstrated by monitoring the hydrolysis of N,N′,N″-triacetylchitotriose. The presented method was also utilized to study the pH dependence of enzyme activity. An online assay with N,N′-diacetylchitobiose as a substrate was developed using the Transverse Diffusion of Laminar Flow Profiles model to optimize the injection sequence and in-capillary mixing of substrate and enzyme plugs. The experimental results were in good agreement with predictions of the model. The online assay was successfully used to observe the inhibition effect of N,N′-dimethylformamide on the activity of β-N-acetylhexosaminidase with nanoliter volumes of reagents used per run and a high degree of automation. After adjustment of background electrolyte pH, an online assay with N,N′,N″-triacetylchitotriose as a substrate was also performed.

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Evidence for symplectic symmetry in Ab initio no-core shell model results for light nuclei

Clear evidence for symplectic symmetry in low-lying states of 12C and 16O is reported. Eigenstates of 12C and 16O, determined within the framework of the no-core shell model using the J-matrix inverse scattering potential with A相似文献