Alkyl chain conformation and the electronic structure of octyl heavy chalcogenolate monolayers adsorbed on Au(111)

Adsorption states of dioctyl dichalcogenides (dioctyl disulfide, dioctyl diselenide, and dioctyl ditelluride) arranged on Au(111) have been studied by X-ray photoelectron spectroscopy (XPS), infrared-visible sum-frequency generation (SFG), and ultraviolet photoelectron spectroscopy (UPS). XPS measurements suggest that dioctyl dichalcogenides dissociatively adsorbed on Au(111) surfaces to form the corresponding monolayers having chalcogen-gold covalent bonds. The elemental compositions of octanechalcogenolates on Au(111) indicate that the saturation coverages of the octyl heavy chalcogenolate (OcSe, OcTe) monolayers are lower than that of the octanethiolate (OcS) self-assembled monolayers (SAMs). The SFG observations of the CH(2) vibrational bands for the heavy chalcogenolate monolayers strongly suggest that a discernible amount of gauche conformation exists in the monolayers, while OcS SAMs adopt highly ordered all-trans conformation. The intensity ratio of the symmetric and asymmetric CH(3) stretching vibration modes measured by SFG shows that the average tilt angle of the methyl group of the OcSe monolayers is greater than that of the OcS SAMs. The larger tilt angle of the methyl group and the existence of a discernible amount of gauche conformation in the OcSe monolayers are due to the lower surface coverage of the OcSe monolayers compared with the OcS SAMs. The smaller polarization dependence in the angle-resolved UPS (ARUPS) spectra of the OcSe monolayers than that of the OcS SAMs is caused by the more disordered structures of the alkyl chain in the former. XPS, SFG, and ARUPS measurements indicate a similar tendency for the OcTe monolayers. The density of states (DOS) observed by UPS at around 1.3 eV for OcS adsorbed on Au(111) is considered to be the antibonding state of the Au-sulfur bond. Similar DOS is also observed by UPS at around 1.0 eV for the OcSe monolayers and at approximately 1.6 eV for the OcTe monolayers on Au(111).     

Copper(II)-cetyltrimethylammonium chloride-chromal blue G ternary complex and its application to the spectrophotometric determination of copper(II)

A sensitive spectrophotometric method for the determination of copper(II) based on a ternary complex with chromal blue G, a triphenylmethane reagent in the presence of cetyltrimethylammonium chloride, is described. The sensitivity of color reaction between copper and chromal blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride, a cationic surfactant. The color development of the ternary complex can be utilized in the highly sensitive spectrophotometric determination of copper. The molar absorptivity of the binary complex between copper and chromal blue G ε_630nm = 9.56 × 10³liters · mol⁻¹ · cm⁻¹ is enchanced on ternary complex formation to ε_{542 nm} = 4.78 × 10⁴liters · mol⁻¹ · cm⁻¹. The ternary complex gave a maximal absorbance at 542 nm in the pH range 9.8–11. Beer's law is obeyed up to at least 1.2 ppm of copper. The maximal absorbance of the ternary complex was found to develop within 5 min and then it remains constant for several hours. The formation constant of the ternary complex is calculated to be 8.6 × 10¹⁰ under these conditions.     

Separation and characterization of sialic acid-containing salivary-type amylase from patients' sera with immunoglobulin A-type myeloma.

Isoamylases, with an abnormal anodic migration, were detected by an electrophoretic technique in the sera from two patients with immunoglobulin A-type myeloma. The abnormal isoamylase bands migrate towards the anode faster than the salivary isoamylase (S2) band and were stained more strongly than the S2 sub-band. The abnormal isoamylase could be separated from patients' sera by using size-exclusion high-performance liquid chromatography. The serum abnormal isoamylases were showed to be sialic acid residues containing amylase, after the study of treatment with neuraminidase (EC 3.2.1.18), and to be salivary-type amylase, after the study of reaction with human salivary monoclonal antibody. The abnormal bands were not detected in the saliva from one patient. The two patients had no detectable malignancies except myeloma. These findings strongly suggest that the sialic acid-containing salivary-type amylases were produced ectopically from myeloma cells. In this regard the ectopic amylase production by myeloma cells is discussed.     

Differential preconcentration of arsenic(III) and arsenic(V) with thionalide loaded on silica gel

2-Mercapto-N-2-naphtylacetamide (thionalide) on silica gel is used for differential preconcentration of μg l^?1 levels of arsenic(III) and arsenic(V) from aqueous solution. In batch experiments, arsenic(III) was quantitatively retained on the gel from solutions of pH 6.5–8.5, but arsenic(V) and organic arsenic compounds were not retained. The chelating capacity of the gel was 5.6 μmol g^?1 As(III) at pH 7.0. Arsenic retained on teh column was completely eluted with 25 ml of 0.01 M sodium borate in 0.01 M sodium hydroxide containing 10 mg l^?1 iodine (pH 10). The arsenic was determined by silver diethyldithiocarbamate spectrophotometry. Arsenic(V) was subsequently determined after reduction to arsenic(III) with sulphite and iodide. Arsenic(III) and arsenic(V) in sea water are shown to be < 0.12 and 1.6 μg l^?1, respectively.     

Monolithic silica columns for high-efficiency chromatographic separations

A deconvolution methodology for overlapped chromatographic signals is proposed. Several single-wavelength chromatograms of binary mixtures, obtained in different runs at diverse concentration ratios of the individual components, were simultaneously processed (multi-batch approach), after being arranged as two-way data. The chromatograms were modelled as linear combinations of forced peak profiles according to a polynomially modified Gaussian equation. The fitting was performed with a previously reported hybrid genetic algorithm with local search, leaving all model parameters free. The approach yielded more accurate solutions than those found when each experimental chromatogram was fitted independently to the peak model (single-batch approach). The improvement was especially significant for those chromatograms where the peaks were severely affected by the tails of the preceding compounds. Peak shifts among chromatograms, which are a usual source of non-bilinearity, were modelled in a continuous domain instead of in a discrete way, which avoided some drawbacks associated with latent variable methods. An experimental design involving simulated chromatograms was applied to check the method performance. Five main factors affecting the deconvolution were examined: concentration pattern, chromatographic resolution, number of batches and replicates, and noise level, which were evaluated using first- and second-order figures of merit. The method was also tested on three real samples containing compounds showing different overlap. Four multi-batch deconvolution methods were considered differing in the nature of the processed information and kind of peak matching among chromatograms. In all cases, the multi-batch deconvolution yielded better performance than the single-batch approach.     

Simple 2D-HPLC using a monolithic silica column for peptide separation

Separation of peptides by fast and simple two-dimensional (2D)-HPLC was studied using a monolithic silica column as a second-dimension (2nd-D) column. Every fraction from the first column, 5 cm long (2.1 mm ID) packed with polymer-based cation exchange beads, was subjected to separation in the 2nd-D using an octadecylsilylated (C18) monolithic sillica column (4.6 mm ID, 2.5 cm). A capillary-type monolithic silica C18column (0.1 mm ID, 10 cm) was also employed as a 2nd-D column with split flow/injection. Effluentof the first dimension (1st-D) was directly loaded into an injector loop of 2nd-D HPLC. UV and MS detection were successfully carried out at high linear velocity of mobile phase at 2nd-D using flow splitting for the 4.6 mm ID 2nd-D column, or with directconnection of the capillary column to the MS interface. Two-minute fractionation inthe 1st-D, 118-second loading, and 2-second injection by the 2nd-D injector, allowed one minute for gradient separation in the 2nd-D, resulting in a maximum peak capacity of about 700 within 40 min. The use of a capillary column in solvent consumption and better MS detectability compared to a larger-sized column. This kind of fast and simple 2D-HPLC utilizing monolithic silica columns will be useful for the separation of complex mixtures in a short time.     

INTERPRETATION OF THE 'DICHROIC ORIENTATION' OF PHYTOCHROME

The dichroic orientation of phytochrome observed both in the phytochrome-mediated phototropism in Adiantum protonemata and in the phytochrome-mediated chloroplast movement in Mougeotia were analyzed in terms of the orientation of the transition moment associated with the long-wavelength absorption band, assuming that phytochrome, associated with the plasma membrane, rotates around the normal to the membrane. The orientation of the long-wavelength transition moment of the phytochrome chromophore was calculated using the zero-differential overlap approximation of the molecular orbital theory for ir-electrons. The results indicate that the orientation of the long-wavelength transition moment mainly changes later than 2 ms after red light excitation of P_r, and that the different dichroic orientations of P_r and P_fr can be attributed to the change in the angle of the long-wavelength transition moment of phytochrome with the plasma membrane from 18^o to 72^o during phototransformation.     

Anomalous excimer formation of a pyrenyl derivative having a mesogen group of alkoxycyanobiphenyl in its smectic mesophase

The direct photolysis of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) in aqueous solution was investigated under monochromatic ultraviolet (UV) irradiation at 254 nm. ABTS was found to be directly photolyzed by UV irradiation to yield the one-electron oxidized radical, ABTS⁺, which is a blue-green colored persistent radical species that has strong visible absorption bands. The photochemical production of ABTS⁺ was strongly dependent on the solution pH and the presence of dissolved oxygen. The presence of dissolved oxygen increased the quantum yields at pH 3, whereas it inhibited the production of ABTS⁺ at pH 6.5. Spectrophotometric and spectrofluorometric data indicated that ABTS photolysis may occur as a result of the transfer of one-electron between the singlet excited state and the ground state of ABTS. Observations made during UV/H₂O₂ experiments with ABTS suggested that the dependence of the photoloysis of ABTS on the solution pH and the presence of dissolved oxygen is related to the role of the hydroperoxyl/superoxide radical (HO₂/O₂⁻), which appears to be formed via a secondary reaction of the reduced intermediate of ABTS with dissolved oxygen. The proposed photolytic reactions were supported by the observed stoichiometry between the amount of ABTS⁺ radicals produced and the amount of ABTS molecules decomposed.     

Convergence rate of solutions toward stationary solutions to the compressible Navier-Stokes equation in a half line

We study a large time behavior of a solution to the initial boundary value problem for an isentropic and compressible viscous fluid in a one-dimensional half space. The unique existence and the asymptotic stability of a stationary solution are proved by S. Kawashima, S. Nishibata and P. Zhu for an outflow problem where the fluid blows out through the boundary. The main concern of the present paper is to investigate a convergence rate of a solution toward the stationary solution. For the supersonic flow at spatial infinity, we obtain an algebraic or an exponential decay rate. Precisely, if an initial perturbation decays with the algebraic or the exponential rate in the spatial asymptotic point, the solution converges to the corresponding stationary solution with the same rate in time as time tends to infinity. An algebraic convergence rate is also obtained for the transonic flow. These results are proved by the weighted energy method.