Novel neuronal nitric oxide synthase (nNOS) selective inhibitor, aplysinopsin-type indole alkaloid, from marine sponge Hyrtios erecta

Two novel aplysinopsin-type indole alkaloids, 1 and 2, and three known indole alkaloids were isolated from the marine sponge Hyrtios erecta. These compounds exhibited selective inhibitory activity against the neuronal isozyme of nitric oxide synthase (nNOS). Furthermore, new quinolone 7 was also isolated from the same marine sponge. The chemical structures of these new compounds were elucidated on the basis of spectroscopic analysis.     

Synthesis and properties of p-benzoquinone-fused hexadehydro[18]annulenes

A series of hexadehydro[18]annulenes fused with different numbers of p-benzoquinone, 4-6, were synthesized by stepwise transformation of the p-dimethoxybenzene moiety of the precursor dehydroannulene 3 fused with three 3,6-dimethoxy-4,5-dimethylbenzene units at 1,2-positions into p-benzoquinone using ceric ammonium nitrate. The UV-vis spectra of compounds 4 and 5, which have both electron-donating p-dimethoxybenzene unit(s) and electron-accepting p-benzoquinone unit(s) in the π-systems, showed the maximum absorption bands bathochromically shifted in comparison with 3 having only p-dimethoxybenzene units and 6 having only p-benzoquinone units. However, the solvatochromism expected for 4 and 5 was found to be quite weak possibly because the HOMO and LUMO (B3LYP/6-31G(d)) are not localized but rather delocalized over the whole π-systems.     

Deuterium isotope effects on hydrophobic interactions: the importance of dispersion interactions in the hydrophobic phase

Hydrogen/deuterium isotope effects on hydrophobic binding were examined by means of reversed-phase chromatographic separation of protiated and deuterated isotopologue pairs for a set of 10 nonpolar and low-polarity compounds with 10 stationary phases having alkyl and aryl groups bonded to the silica surface. It was found that protiated compounds bind to nonpolar moieties attached to silica more strongly than deuterated ones, demonstrating that the CH/CD bonds of the solutes are weakened or have less restricted motions when bound in the stationary phase compared with the aqueous solvent (mobile phase). The interactions responsible for binding have been further characterized by studies of the effects of changes in mobile phase composition, temperature dependence of binding, and QSRR (quantitative structure-chromatographic retention relationship) analysis, demonstrating the importance of enthalpic effects in binding and differentiation between the isotopologues. To explain our results showing the active role of the hydrophobic (stationary) phase we propose a plausible model that includes specific contributions from aromatic edge-to-face attractive interactions and attractive interactions of aliphatic groups with the pi clouds of aromatic groups present as the solute or in the stationary phase.     

Studies on taxol biosynthesis. Preparation of 5α-acetoxytaxa-4(20),11-dien-2α,10β-diol derivatives by deoxygenation of a taxadiene tetra-acetate obtained from Japanese yew

The putative metabolite, 5α-acetoxytaxa-4(20),11-dien-2α,10β-diol (7), which is a promising candidate as a biosynthetic pathway triol in taxol biosynthesis, has been prepared by Barton deoxygenation of the C-14-hydroxyl group of a differentially protected derivative of natural 2α,5α,10β-triacetoxy-14β-(2-methyl)-butyryloxytaxa-4(20),11-diene (8), a major taxoid metabolite isolated from Japanese Yew heart wood. The synthetic protocol devised, is amenable for the preparation of isotopically labeled congeners that will be useful to probe further intermediate steps in the biosynthesis of taxol.     

Mechanisms of water oxidation catalyzed by the cis,cis-[(bpy)2Ru(OH2)]2O4+ ion

The cis,cis-[(bpy)(2)Ru(III)(OH(2))](2)O(4+) micro-oxo dimeric coordination complex is an efficient catalyst for water oxidation by strong oxidants that proceeds via intermediary formation of cis,cis-[(bpy)(2)Ru(V)(O)](2)O(4+) (hereafter, [5,5]). Repetitive mass spectrometric measurement of the isotopic distribution of O(2) formed in reactions catalyzed by (18)O-labeled catalyst established the existence of two reaction pathways characterized by products containing either one atom each from a ruthenyl O and solvent H(2)O or both O atoms from solvent molecules. The apparent activation parameters for micro-oxo ion-catalyzed water oxidation by Ce(4+) and for [5,5] decay were nearly identical, with DeltaH(++) = 7.6 (+/-1.2) kcal/mol, DeltaS() = -43 (+/-4) cal/deg mol (23 degrees C) and DeltaH(++) = 7.9 (+/-1.1) kcal/mol, DeltaS(++) = -44 (+/-4) cal/deg mol, respectively, in 0.5 M CF(3)SO(3)H. An apparent solvent deuterium kinetic isotope effect (KIE) of 1.7 was measured for O(2) evolution at 23 degrees C; the corresponding KIE for [5,5] decay was 1.6. The (32)O(2)/(34)O(2) isotope distribution was also insensitive to solvent deuteration. On the basis of these results and previously established chemical properties of this class of compounds, mechanisms are proposed that feature as critical reaction steps H(2)O addition to the complex to form covalent hydrates. For the first pathway, the elements of H(2)O are added as OH and H to the adjacent terminal ruthenyl O atoms, and for the second pathway, OH is added to a bipyridine ring and H is added to one of the ruthenyl O atoms.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).     

A characteristic CH band in VCD of methyl glycosidic carbohydrates

Novel vibrational circular dichroism (VCD) studies in the CH region of a series of methyl glycosidic carbohydrates were examined. The specific CH stretching VCD band predicts absolute stereochemistries of their anomeric positions. The C-1 chiral information was extracted to the methoxy substituent as a probe. The concept of the vibrational chirality probe from a single chiral center in the presence of numerous such centers might be useful in determining the absolute configuration, when a multiplicity of chiral centers is present in a molecule such as a carbohydrate.     

The reactions of benzofuroxan with carbonyl compounds on the surface of solid catalysts

The cyclocondensations of benzofuroxan 1a with carbonyl compounds were smoothly and efficiently carried out by the adsorption of the components on the surface of silica gel or a molecular sieve to form a 2,3-disubstituted quinoxaline 1,4-dioxide. When the reactions using a molecular sieve 3A (powder) were carried out at 90°, the actual reaction times were reduced to 0.5-2 hours. Although Duerckheimer has reported the isolation of only the 7-substituted quinoxaline 1,4-dioxide when 5-methoxybenzofuroxan 1e was allowed to react with ethyl acetoacetate 2j , it produced only the 6-methoxy isomer as the reaction product by our method. 5-Carboxybenzofuroxan 1f did not react with the carbonyl compound.