Click chemistry in materials synthesis. III. Metal‐adhesive polymers from Cu(I)‐catalyzed azide–alkyne cycloaddition

1,2,3‐Triazole‐based polymers generated from the Cu(I)‐catalyzed cycloaddition between multivalent azides and acetylenes are effective adhesive materials for metal surfaces. The adhesive capacities of candidate mixtures of azide and alkyne components were measured by a modified peel test, using a customized adhesive tester. A particularly effective tetravalent alkyne and trivalent azide combination was identified, giving exceptional strength that matches or exceeds the best commercial formulations. The addition of Cu catalyst was found to be important for the synthesis of stronger adhesive polymers when cured at room temperature. Heating also accelerated curing rates, but the maximum adhesive strengths achieved at both room temperature and high temperature were the same, suggesting that crosslinking reaches the same advanced point in all cases. Polytriazoles also form adhesives to aluminum, but copper is bound more effectively, presumably because active Cu(I) ions may be leached from the surface to promote crosslinking and adhesion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5182–5189, 2007     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

On-line preconcentration method for the determination of trace metals in water samples using a fully automated pretreatment system coupled with ICP-AES.

An automated on-line sample-preparation method using a computer-controlled pretreatment system (Auto-Pret AES system) coupled with ICP-AES was developed. In this work, an iminodiacetate chelating resin, packed in a mini-column and installed in the system was employed for the collection/concentration of 13 trace metals, including such toxic metals as Be, Cd, Cr, Cu and Pb. The limits of detection of the proposed method for trace metals were in the range of 0.001 (Be) -0.18 (Pb) ng mL-1. The enrichment factors for metal ions were about 19 times, when 5 mL of samples were used. The sample throughput was 11 h-1. The accuracy and the precision of the method were evaluated using river-water reference materials, SLRS-4 from NRCC, JSAC 0301-1 and JSAC 0302 from the Japan Society for Analytical Chemistry. The proposed method can be favorably applied to the collection/concentration of trace metals in natural water samples.     

Determination of Ascorbic Acid by Electrocatalytic Response of an Electrode Coated with Polyvinylpyridine Film and Palladium-Plated

A procedure was developed for analysis of ascorbic acid with a carbon glass electrode coated with a palladium-modified poly(2-vinylpyridine) film.     

Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

Application of ultrafine-dispersed diamonds in electroplating

The results obtained upon the electrochemical deposition of composite coatings containing ultrafine-dispersed diamonds produced by detonation synthesis are generalized. The main advantages of such coatings over the well-known composite electrochemical coatings are revealed.     

Electron Metal-Dielectric Phase Transitions in Semiconductors under Pressure

The effect of uniform pressure on the character of metal-dielectric transitions in compensated weakly- and highly doped semiconductors (WHDCS) is considered. The influence of hybridization of resonance quasilocalized impurity states with band continuum states on the transition is shown. Minimum metallic conductivities in p-CdSnAs₂ are determined for Mott and Anderson transitions. Special features of the metal-dielectric transformation in weakly-doped narrow- and high energy-gap semiconductors are discussed for the case of hydrogen-like impurities. Anderson localization in WHDCS is also considered. Phase diagrams are presented.