Boundary stabilization for a non‐linear beam on elastic bearings

In this paper, we study the equation under non‐linear boundary conditions which model the vibrations of a beam clamped at x=0 and supported by a non‐linear bearing at x=L. By adding only one damping mechanism at x=L, we prove the existence of a global solution and exponential decay of the energy. Copyright © 2001 John Wiley & Sons, Ltd.     

Interference effect of an upstream larger cylinder on the lock-in vibration of a flexibly mounted circular cylinder

Experiments have been carried out to investigate the flow-induced vibration response of a flexibly mounted circular cylinder located in the vicinity of a larger cylinder and subjected to cross-flow. The interfering larger cylinder was placed upstream and had a diameter twice that of the vibrating cylinder. Complex interaction was observed between the flow over the two cylinders. The vibration responses of the flexible cylinder were classified into different regimes according to the relative positions of the two cylinders. In the-side-by-side arrangement and the tandem or near-tandem arrangement, flow-induced vibrations of the flexible cylinder were greatly suppressed. In the staggered arrangement which covered a large portion of the relative cylinder positions being investigated, vibrations of the smaller cylinder were greatly amplified. The vibration response curves were also largely modified with a broadening of the lock-in resonance range. A shift of the peak reduced velocity for maximum vibration response was also found. Flow visualizations and wake velocity measurements suggested that the modifications of the vibration responses were related to the presence or absence of constant or intermittent flow through the gap region between the two cylinders. The proposed mechanisms of flow interactions and the resulting vibration response characteristics could explain previous observations on flow-induced vibrations of two equal-sized circular cylinders reported in the literature.     

Heat conduction in extended X-junctions of single-walled carbon nanotubes

Non-equilibrium molecular dynamics (NEMD) simulations are employed to investigate the longitudinal thermal conductivity of non-orthogonal extended X-junction (EX-junction) of single-walled carbon nanotubes (SWCNTs). Different from standard junctions of SWCNTs, two distinct jumps in the temperature profile around the EX-junction are observed, which are responsible for the larger temperature gradient and reduction in thermal conductivity when compared to standard X-junction. Quantum corrected results show that the longitudinal thermal resistance of the X-junction and EX-junction decreases monotonically with increasing temperature which makes the longitudinal thermal conductivity of the tube with junction less sensitive to temperature above 400 K comparing with the individual pristine tube. The origin of the significant decrease of thermal conductivity of EX-junction is discussed through phonon spectra analysis.     

High‐mobility pentacene OTFT with TaLaO gate dielectric passivated by fluorine plasma

Pentacene thin‐film transistor with high‐κ TaLaO as gate dielectric has been fabricated and shows a carrier mobility of 0.73 cm²/V s, much higher than that based on pure La₂O₃ (0.43 cm²/V s) due to the smoother surface of the TaLaO film and thus larger pentacene islands grown on it in the initial stage. Moreover, among various times for fluorine‐plasma treatment on the TaLaO gate dielectric, 100 seconds result in the highest carrier mobility of 1.12 cm²/V s due to (1) smoothest oxide surface achieved by fluorine passivation of oxide traps, as measured by AFM and supported by smallest sub‐threshold swing and lowest low‐frequency noise; (2) the largest pentacene grains grown on the smoothest oxide surface, as demonstrated by AFM.

     

Involutionn-aire et ses applications a l'étud des hyperquadriques dans les espaces euclidiens et non-euclidiens an dimensions

Sans résumé Présenté par G. Hajós     

Jamming of Granular Flow in a Two-Dimensional Hopper

We study experimentally the jamming phenomenon of granular flow of monodisperse disks of D = 5 mm diameter in a two-dimensional hopper with opening R. The jamming probability J(d) is measured where d identical withR/D. We found that J(d) decreases from 1 to zero when d increases from 2 to 5. From observing the disk configurations of the arch in the jamming events, the jamming probability can be explained quantitatively by treating the arch as the trajectory of a restricted random walker.     

Tetradentate Gold(III) Complexes as Thermally Activated Delayed Fluorescence (TADF) Emitters: Microwave-Assisted Synthesis and High-Performance OLEDs with Long Operational Lifetime

Structurally robust tetradentate gold(III)-emitters have potent material applications but are rare and unprecedented for those displaying thermally activated delayed fluorescence (TADF). Herein, a novel synthetic route leading to the preparation of highly emissive, charge-neutral tetradentate [C^C^N^C] gold(III) complexes with 5-5-6-membered chelate rings has been developed through microwave-assisted C−H bond activation. These complexes show high thermal stability and with emission origin (³IL, ³ILCT, and TADF) tuned by varying the substituents of the C^C^N^C ligand. With phenoxazine/diphenylamine substituent, we prepared the first tetradentate gold(III) complexes that are TADF emitters with emission quantum yields of up to 94 % and emission lifetimes of down to 0.62 μs in deoxygenated toluene. These tetradentate Au^III TADF emitters showed good performance in vacuum-deposited OLEDs with maximum EQEs of up to 25 % and LT₉₅ of up to 5280 h at 100 cd m⁻².     

Chemoenzymatic synthesis of highly enantiomerically enriched secondary alcohols with a thiazolic core

Stereoselective preparative enzymatic acylation and hydrolysis/methanolysis of various C-substituted rac-thiazol-2-yl-methanols were achieved for the preparation of enantiopure or enantiomerically enriched, naturally occurring 2-hydroxymethylthiazoles. The absolute configurations of the resulting secondary alcohols were determined by a detailed ¹H NMR study of Mosher’s derivatives.     

Identification of differential gene expression by high throughput analysis

High throughput analysis of differential gene expression is a powerful tool that can be applied to many areas in molecular cell biology, including differentiation, development, physiology, and pharmacology. In recent years, a variety of techniques have been developed to analyze differential gene expression, including comparative expressed sequence tag sequencing, differential display, representational difference analysis, cDNA or oligonucleotide arrays, and serial analysis of gene expression. This review explains the technologies, their scopes, impact on science, as well as their costs and possible limitations. The application of differential display is presented as a tool to identify genes induced by darkness or yellowing process in rice leaves.