Block-coherence measures and coherence measures based on positive-operator-valued measures

We study block-coherence measures based on the resource theory of block-coherence and coherence measures based on positive-operator-valued measures (POVM). Several block-coherence measures are presented, including the block-coherence measure based on maximum relative entropy, the one-shot block-coherence cost under maximally block-incoherent operations, and the coherence measure based on coherent rank. Their relationships are obtained. Moreover, we describe the deterministic coherence dilution process by constructing block-incoherent operations. Based on the POVM coherence resource theory, we also propose two coherence measures and analyze their relationship.     

Noise analysis of an electro-optic sensor system

Optical Review - This paper describes the noise analysis of an electro-optic (EO) sensor system based on experimental and simulation results. We developed a polarization simulator of the EO sensor...     

一阶Lagrange系统的梯度表示

研究一阶Lagrange系统的梯度表示. 给出一阶Lagrange系统可成为梯度系统的条件. 利用梯度系统的性质研究系统的稳定性. 给出例子说明结果的应用. 关键词： 一阶Lagrange系统 梯度系统 稳定性     

Theoretical calculations of spin-Hamiltonian parameters and defect structures for Cu2+ in trigonally-distorted tetrahedral sites of ZnO and GaN crystals

The spin-Hamiltonian (SH) parameters (g factors g _//, g ⊥ and hyperfine structure constants ⁶³ A _//, ⁶³ A ⊥, ⁶⁵ A _//, ⁶⁵ A ⊥) for Cu²⁺ ions in the trigonally-distorted tetrahedral sites of ZnO and GaN crystals are calculated from a complete diagonalization (of energy matrix) method (CDM) based on a two spin-orbit parameter model for d ⁹ ions in trigonal symmetry. In the method, the Zeeman and hyperfine interaction terms are added to the Hamiltonian in the conventional CDM. The calculated results are in good agreement with the experimental values. The calculated SH parameters are also compared with those using the traditional diagonalization method or perturbation method only within the ² T ₂ term. It appears that, for exact calculations of SH parameters of d ⁹ ions in trigonal tetrahedral clusters in crystals, the present CDM is preferable to the traditional diagonalization method or perturbation method within the ² T ₂ term. The local structures of Cu²⁺ centers (which differ from the corresponding structure in the host crystal) in ZnO : Cu²⁺ and GaN : Cu²⁺ are obtained from the calculations. The results are discussed.     

Preparation and characterization of vinyltriethoxysilane based inorganic–organic gel glasses dispersed 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal

Vinyltriethoxysilane based inorganic–organic glasses dispersed with 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal are designed to fabricate a new type of gel glass dispersed with liquid crystal. Scanning electron microscopy shows that the nematic liquid crystal phase, occupying the interconnected cavities, is continuously embedded in the inorganic–organic matrixes. The effect of the nematic liquid crystal weight concentration on the morphology is investigated. The differential scanning calorimetry shows that the nematic-isotropic transition temperature depends on the nematic liquid crystal weight concentration. The Raman spectra show that there are no obvious Raman frequency shifts, compared with pure nematic liquid crystal. The in situ diffuse reflectance FTIR spectra show that the integral intensity of bands of hydroxyls has not varied.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

用楔形柱面光纤微透镜耦合的1.3μm SOA组件

运用激光模式耦合理论分析了半导体光放大器(SOA)与单模通信光纤的连接损耗,并设计制作了楔形柱面光纤微透镜用来实现两者的模斑匹配,有效地降低了器件的光耦合损耗.本文介绍了楔形柱面光纤微透镜耦合的1.3 μm半导体光放大器(SOA)组件及其制作方法.该组件的最大增益不小于14 dB,其偏振灵敏度小于1 dB,增益波动不大于0.5 dB.     

基于模糊PID算法的烘箱控制仿真分析

模糊算法能解决传统方法难以解决模型的不确定性、非线性、复杂等问题的任务,PID算法在定模型下控制稳态性能好,能消除静差等特点．结合这2种方法,提出模糊PID算法,应用于通用烘箱的温度控制,通过仿真分析,表明：对不同烘箱、不同环境下,用该算法控制,有高精度、超调量小,无需调节PID参数,具有智能控制等功能．     

丙烯酰胺在聚乙二醇水溶液中聚合初期的液滴形成与成长过程

用动态激光光散射(DLS)在线观测了丙烯酰胺(AM)在聚乙二醇(PEG)水溶液中聚合初期液滴的出现、生长及聚并过程,考察了PEG分子量和浓度对聚合初期液滴尺寸的影响;用透射电镜(TEM)对聚合初期液滴形态的演变进行了观察,发现与DLS结果能很好吻合.用分光光度计对聚合体系分相点进行确定,采用溴化法测定了聚合体系临界分相时的转化率.随PEG分子量或浓度的升高,临界分相转化率逐渐减小;随温度的升高,临界分相转化率先减小后增大,在50℃左右出现最小值.用凝胶渗透色谱(GPC)对聚合体系临界分相时聚丙烯酰胺(PAM)的分子量进行了研究,变化趋势与临界分相转化率的变化一致.在上述基础上,提出了AM在PEG水溶液中聚合初期的液滴形成、成长机理.     

The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.