High-precision measurements of seawater Pb isotope compositions by double spike thermal ionization mass spectrometry

A new method for the determination of seawater Pb isotope compositions and concentrations was developed, which combines and optimizes previously published protocols for the separation and isotopic analysis of this element. For isotopic analysis, the procedure involves initial separation of Pb from 1 to 2 L of seawater by co-precipitation with Mg hydroxide and further purification by a two stage anion exchange procedure. The Pb isotope measurements are subsequently carried out by thermal ionization mass spectrometry using a ²⁰⁷Pb–²⁰⁴Pb double spike for correction of instrumental mass fractionation. These methods are associated with a total procedural Pb blank of 28 ± 21 pg (1sd) and typical Pb recoveries of 40–60%. The Pb concentrations are determined by isotope dilution (ID) on 50 mL of seawater, using a simplified version of above methods. Analyses of multiple aliquots of six seawater samples yield a reproducibility of about ±1 to ±10% (1sd) for Pb concentrations of between 7 and 50 pmol/kg, where precision was primarily limited by the uncertainty of the blank correction (12 ± 4 pg; 1sd). For the Pb isotope analyses, typical reproducibilities (±2sd) of 700–1500 ppm and 1000–2000 ppm were achieved for ²⁰⁷Pb/²⁰⁶Pb, ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, ²⁰⁸Pb/²⁰⁴Pb, respectively. These results are superior to literature data that were obtained using plasma source mass spectrometry and they are at least a factor of five more precise for ratios involving the minor ²⁰⁴Pb isotope. Both Pb concentration and isotope data, furthermore, show good agreement with published results for two seawater intercomparison samples of the GEOTRACES program. Finally, the new methods were applied to a seawater depth profile from the eastern South Atlantic. Both Pb contents and isotope compositions display a smooth evolution with depth, and no obvious outliers. Compared to previous Pb isotope data for seawater, the ²⁰⁶Pb/²⁰⁴Pb ratios are well correlated with ²⁰⁷Pb/²⁰⁶Pb, underlining the significant improvement achieved in the measurement of the minor ²⁰⁴Pb isotope.     

Structural and Functional Implications of the Interaction between Macrolide Antibiotics and Bile Acids

Macrolide antibiotics, such as azithromycin and erythromycin, are in widespread use for the treatment of bacterial infections. Macrolides are taken up and excreted mainly by bile. Additionally, they have been implicated in biliary system diseases and to modify the excretion of other drugs through bile. Despite mounting evidence for the interplay between macrolide antibiotics and bile acids, the molecular details of this interaction remain unknown. Herein, we show by NMR measurements that macrolides directly bind to bile acid micelles. The topology of this interaction has been determined by solvent paramagnetic relaxation enhancements (solvent PREs). The macrolides were found to be bound close to the surface of the micelle. Increasing hydrophobicity of both the macrolide and the bile acid strengthen this interaction. Both bile acid and macrolide molecules show similar solvent PREs across their whole structures, indicating that there are no preferred orientations of them in the bile micelle aggregates. The binding to bile aggregates does not impede macrolide antibiotics from targeting bacteria. In fact, the toxicity of azithromycin towards enterotoxic E. coli (ETEC) is even slightly increased in the presence of bile, as was shown by effective concentration (EC₅₀) values.     

Self‐Organization of Gold Nanoparticle Assemblies with 3D Spatial Order and Their External Stimuli Responsiveness

Gold nanoparticles (AuNP) with pyridyl end‐capped polystyrenes (PS‐4VP) as “quasi‐monodentate” ligands self‐assemble into ordered PS‐4VP/AuNP nanostructures with 3D hexagonal spatial order in the dried solid state. The key for the formation of these ordered structures is the modulation of the ratio AuNP versus ligands, which proves the importance of ligand design and quantity for the preparation of novel ordered polymer/metal nanoparticle conjugates. Although the assemblies of PS‐4VP/AuNP in dispersion lack in high dimensional order, strong plasmonic interactions are observed due to close contact of AuNP. Applying temperature as an external stimulus allows the reversible distortion of plasmonic interactions within the AuNP nanocomposite structures, which can be observed directly by naked eye. The modulation of the macroscopic optical properties accompanied by this structural distortion of plasmonic interaction opens up very interesting sensoric applications.

     

Synthesis of pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles by ionic liquids under green and eco-safe conditions

Optimization of a green approach to the synthesis of pyrano[2,3-c]pyrazoles based on the one-pot, four-component condensation via a domino Knoevenagel/Michael/cyclization sequence was investigated. This method involved the evaluation of the activity of several ionic liquids (ILs) in various solvents. This one-pot, four-component reaction revealed simplicity, higher yield and lower toxicity advantages over a corresponding three-component method. The effect of reaction parameters including the type and amount of catalyst, type of solvent, reaction temperature and time were studied with respect to yield of pyrano[2,3-c]pyrazoles. Catalyst recyclability and time-saving aspects of the reaction suggest that this method presents real alternatives over conventional reaction protocols.     

Nickel‐Catalyzed Barton Decarboxylation and Giese Reactions: A Practical Take on Classic Transforms

Two named reactions of fundamental importance and paramount utility in organic synthesis have been reinvestigated, the Barton decarboxylation and Giese radical conjugate addition. N ‐hydroxyphthalimide (NHPI) based redox‐active esters were found to be convenient starting materials for simple, thermal, Ni‐catalyzed radical formation and subsequent trapping with either a hydrogen atom source (PhSiH₃) or an electron‐deficient olefin. These reactions feature operational simplicity, inexpensive reagents, and enhanced scope as evidenced by examples in the realm of peptide chemistry.     

Flip or flop? Students’ perspectives of a flipped lecture in mathematics

This paper describes students’ perspectives of a one-off flipped lecture in a large undergraduate mathematics service course. The focus was on calculating matrix determinants and was designed specifically to introduce debate and argumentation into a mathematics lecture. The intention was to promote a deeper learning and understanding through engagement with the added hope of instilling some passion for the subject. During the lecture, students were asked to vote with their feet, literally moving around the lecture theatre to form groups according to their shared favourite technique for calculating matrix determinants. Group discussions were then followed by a whole class debate facilitated by the lecturers, before they wrapped up the lecture by resolving the professional disagreements that had come to light during the debate. Following the lecture, data on student perspectives was gathered using both surveys and focus groups. Within this paper, we share the data and reveal the interesting results that emerged from our analysis. Despite remaining unconvinced as to whether flipped lectures are better for learning, students reported greater engagement and increased understanding of the material covered.     

The interrelation between void fraction fluctuations and flow patterns in two-phase flow

A fast response, linearized X-ray void measurement system has been used to obtain statistical measurements in normally fluctuating air-water flow in a rectangular channel. It is demonstrated that the probability density function (PDF) of the fluctuations in void fraction may be used as an objective and quantitative flow pattern discriminator for the three dominant patterns of bubbly, slug, and annular flow. This concept is applied to data over the range of 0.0 to 37 m/sec mixture velocities to show that slug flow is simply a transitional, periodic time combination of bubbly and annular flows. Film thicknesses calculated from the PDF data are similar in magnitude in both slug and annular flows. Calculation of slug length and residence time ratios along with bubble lengths in slug flow are also readily obtainable from the statistical measurements. Spectral density measurements showed bubbly flow to be stochastic while slug and annular flows showed periodicities correlatable in terms of the liquid volume flux.     

Looped structure of flowerlike micelles revealed by 1H NMR relaxometry and light scattering

We present experimental proof that so-called "flowerlike micelles" exist and that they have some distinctly different properties compared to their "starlike" counterparts. Amphiphilic AB diblock and BAB triblock copolymers consisting of poly(ethylene glycol) (PEG) as hydrophilic A block and thermosensitive poly(N-isopropylacrylamide) (pNIPAm) B block(s) were synthesized via atom transfer radical polymerization (ATRP). In aqueous solutions, both block copolymer types form micelles above the cloud point of pNIPAm. Static and dynamic light scattering measurements in combination with NMR relaxation experiments proved the existence of flowerlike micelles based on pNIPAm(16kDa)-PEG(4kDa)-pNIPAm(16kDa) which had a smaller radius and lower mass and aggregation number than starlike micelles based on mPEG(2kDa)-pNIPAm(16kDa). Furthermore, the PEG surface density was much lower for the flowerlike micelles, which we attribute to the looped configuration of the hydrophilic PEG block. (1)H NMR relaxation measurements showed biphasic T(2) relaxation for PEG, indicating rigid PEG segments close to the micelle core and more flexible distal segments. Even the flexible distal segments were shown to have a lower mobility in the flowerlike micelles compared to the starlike micelles, indicating strain due to loop formation. Taken together, it is demonstrated that self-assemblies of BAB triblock copolymers have their hydrophilic block in a looped conformation and thus indeed adopt a flowerlike conformation.     

Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 3: properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite

A step-by-step analysis of the formation and the drug loading of the poly(D,L-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) composite was carried out in a perspective of the following parameters: the structure, the morphology and the adsorption/desorption properties of the composite's bioceramic part. The authors demonstrated the importance of the material's capacity to form a fine dispersion of solid HAp particles, as an initial step, for the further loading of the drug and for the formation of the core-shell structures. The nanometer-sized rods of HAp have the capacity of ensuring a rapid adsorption and a controlled desorption of the drug from their surface, and they can act as a nucleating site for the formation of polymeric cores. Each component of this material was labeled with fluorescence dye, which enabled an insight into the distribution of the components in the core-shells that were obtained as the final outcome. Such an analysis showed a high level of uniformity among the cores enclosed within polymeric shells. From a practical perspective, the labeling of each component of the composite can be regarded as an additional functionality of the material: labeling can enable us to monitor its action during the healing process. This ability to be easily detected is expected to enhance the procedure for the controlled delivery of antibiotics after their local implantation of carriers loaded with the antibiotic and to provide more careful control over this process.     

Application of complementary mass spectrometric techniques to the identification of ketoprofen phototransformation products

Ketoprofen (KP) is a nonsteroidal anti-inflammatory drug, which during UV irradiation rapidly transforms into benzophenone derivatives. Such transformation products may occur after topical application of KP, which is then exposed to sunlight resulting in a photo-allergic reaction. These reactions are mediated by the benzophenone moiety independently of the amount of allergen. The same reactions will also occur during wastewater or drinking water treatment albeit their effect in the aqueous environment is yet to be ascertained. In addition, only a few such transformation products have been recognised. To enable the detection and structural elucidation of the widest range of KP transformation products, this study applies complementary chromatographic and mass spectrometric techniques including gas chromatography coupled to single quadrupole or ion trap mass spectrometry and liquid chromatography hyphenated with quadrupole-time-of-flight mass spectrometry. Based on structural information gained in tandem and multiple MS experiments, and on highly accurate molecular mass measurements, chemical structures of 22 transformation products are proposed and used to construct an overall breakdown pathway. Among the identified transformation products all but two compounds retained the benzophenone moiety--a result, which raises important issues concerning the possible toxic synergistic effects of KP and its transformation products. These findings trigger further research into water treatment technologies that would limit their entrance into environmental or drinking waters.