Effects of substrate treatment on the electroluminescence performance of flexible OLEDs

Electroluminescence (EL) performance of flexible organic light-emitting device (FOLED) has been found to be highly dependent upon the morphology of the surface of the indium thin oxide (ITO)/plastic substrate as well as the patterning and processing conditions of the substrate. We will present evidence showing that luminance efficiency of FOLED can be greatly improved by pretreatment. Surface analysis of the ITO/PET by means of atomic force microscope (AFM) and optical microscope will be compared with that of the ITO/glass and the influence of flexible OLEDs substrate treatment by various methods on EL performance will also be discussed.     

Scanning tunneling spectroscopy of Ag films: the effect of periodic versus quasiperiodic modulation

By using scanning tunneling spectroscopy to probe a silver thin film that contains both periodic and quasiperiodic modulation, and by using Fourier analysis, we unravel the influences of individual Fourier components of the scattering potential (periodic versus quasiperiodic) on the electronic structure of a one-dimensional quasiperiodically modulated thin Ag film. Along the periodically modulated direction, a Bragg reflection-induced energy gap is observed in k space. On the other hand, the exotic E vs k spectrum with many minigaps was observed along the quasiperiodic direction.     

A combined experimental and theoretical analysis of Fe-implanted TiO2 modified by metal plasma ion implantation

Photocatalyst titanium dioxide (TiO₂) thin films were prepared using sol-gel process. To improve the photosensitivity of TiO₂ at visible light, transition metal of Fe was implanted into TiO₂ matrix at 20 keV using the metal plasma ion implantation process. The primary phase of the Fe-implanted TiO₂ films is anatase, but X-ray diffraction revealed a slight shift of diffraction peaks toward higher angles due to the substitutional doping of iron. The additional band gap energy levels were created due to the formation of the impurity levels (Fe-O) verified by X-ray photoelectron spectroscopy, which resulted in a shift of the absorption edge toward a longer wavelength in the absorption spectra. The optical band gap energy of TiO₂ films was reduced from 3.22 to 2.87 eV with an increase of Fe ion dosages from 0 to 1 × 10¹⁶ ions/cm². The band gap was determined by the Tauc plots. The photocatalysis efficiency of Fe-implanted TiO₂ was assessed using the degradation of methylene blue under ultraviolet and visible light irradiation. The calculated density of states for substitutional Fe-implanted TiO₂ was investigated using the first-principle calculations based on the density functional theory. A combined experimental and theoretical Fe-implanted TiO₂ film was formed, consistent with the experimentally observed photocatalysis efficiency of Fe-implanted TiO₂ in the visible region.     

Cavity resonant mode in a metal film perforated with two-dimensional triangular lattice hole arrays

The transmission property of metallic films with two-dimensional hole arrays is studied experimentally and numerically. For a triangular lattice subwavelength hole array in a 150 nm thick Ag film, both cavity resonance and planar surface modes are identified as the sources of enhanced optical transmissions. Semi-analytical models are developed for calculating the dispersion relation of the cavity resonant mode. They agree well with the experimental results and full-wave numerical calculations. Strong interaction between the cavity resonant mode and surface modes is also observed.     

Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.

     

Sequence influence of nonidentical InGaAsP quantum wells on broadband characteristics of semiconductor optical amplifiers--superluminescent diodes

Extremely broadband emission is obtained from semiconductor optical amplifiers-superluminescent diodes with nonidentical quantum wells made of InGaAsP/InP materials. The well sequence is experimentally shown to have a significant influence on the emission spectra. With the three In(0.67) Ga(0.33) As(0.72) P(0.28) quantum wells near the n -cladding layer and the two In(0.53) Ga(0.47) As quantum wells near the p -cladding layer, all bounded by In(0.86) Ga(0.14) As(0.3)P(0.7) barriers, the emission spectrum could cover from less than 1.3 to nearly 1.55 microm, and the FWHM could be near 300 nm.     

Proposal for a New Dense Wavelength Division Multiplexing Filter Based on Two-Dimensional Photonic Crystal Ring Resonator

Abstract

A new optical filter design based on a two-dimensional photonic crystal ring resonator structure with an N-channel model is proposed in this article. This study also shows that modifying the scatter radius and the waveguide width can significantly improve the performance of the original structure, which can solve the mode mismatch problem for output waveguide. Here, an example of a 16-channel photonic crystal ring resonator is provided; wavelength spacing of 1.6 nm and a high quality factor Q of 6,000 were achieved. The optical filter would be a potential key component in the application of dense wavelength division multiplexer devices.     

Energy of grain boundaries between cusp misorientations

The disclination model of high angle grain boundaries proposed before is used to understand the energy-angle relations between cusp misorientations. It is found that the model predicts the correct relationship within experimental error with only one adjustable parameter which resembles the Burgers vector of dislocations at low angles. Experimental data for [100] symmetric tilt boundaries in Cu and Al and for [110] symmetric tilt boundaries in Al are used for illustration.     

Low-energy electron diffraction and auger electron spectroscopy study of the oxidation of Ti {0001} at room temperature

The reaction of a clean Ti (0001) surface with oxygen gas at low pressure and room temperature has been studied with low-energy electron diffraction (LEED) and Auger electron spectroscopy (AES). At low exposures (about 1 Langmuir) ap(2×2) superstructure is observed which gradually converts to 1×1 at high exposures (about 100 Langmuirs). The LEED spectra confirm that the final 1×1 structure is different from that of clean Ti (0001), while the AES spectra indicate that the final oxide is probably TiO, not TiO₂. The plausibility of this indication is discussed.