聚丙烯孔洞铁电驻极体膜的电极化及其电荷动态特性

根据栅控恒压电晕充电组合反极性电晕补偿充电法的实验结果计算出铁电驻极体的极化强度.结果说明，伴随着薄膜内孔洞气体的Paschen击穿，该铁电体的极化强度随栅压增加而显著上升.利用上述充电方法和热刺激放电(TSD)谱的分析讨论了这类空间电荷型宏观电偶极子，及与其补偿的空间电荷热退极化的电荷动态特性；阐明了这两类俘获电荷的能阱分布，即构成宏观电偶极子的位于孔洞上下介质层内的等值异号空间电荷分别被俘获在深、浅两种能值陷阱内，而位于薄膜表面层的注入空间电荷则被俘获在中等能值陷阱中. 关键词： 反极性电晕补偿充电法 铁电驻极体 充电电流 热刺激放电     

基于LabVIEW的高温超导材料特性测试实验

高温超导体临界特性的测量是近代物理实验中最为经典的实验之一,本文通过使用GM制冷机,利用Lab-VIEW虚拟仪器软件和高性能采集卡,改进了传统的测量高温超导材料临界特性的实验装置.本测试系统不仅可以测量高温超导体在不同温度下的临界电流,还可以测量其失超传播特性.该实验对于学生了解超导体特性和培养严谨的科学作风十分有益.     

Impact of Extracellular Polymeric Substance in the Inactivation of Harmful Algae by Ag2O/g-C3N4 under Visible Light

Photocatalysis has attracted much attention as an emerging algae removal technology, but the inactivation performance is inevitably affected by the extracellular polymeric substance (EPS) produced by algae. In this study, a photocatalyst (Ag₂O/g-C₃N₄) with efficient algae inactivation is adopted to investigate the interactions with EPS, and the impact of EPS on photocatalytic algae removal is studied. The results show that EPS can adhere to the surface of Ag₂O/g-C₃N₄ by electrostatic force. The interaction with EPS decreases the surface zeta potential of the Ag₂O/g-C₃N₄ from 7.71 to −22.3 mV with the increase in EPS concentration, and the maximum ratio of particle size increases from 825 to 1281 nm. In addition, the interaction with EPS inhibits the release of Ag⁺ in Ag₂O/g-C₃N₄ by half, thus, the toxicity of metal ions will be alleviated. Meanwhile, EPS can also be degraded by Ag₂O/g-C₃N₄, indicating that EPS can work as a radical scavenger to protect the algae cells. Without the protection of EPS, 97.8% of algae cells are inactivated after 5 h photocatalysis. Therefore, more attention should be given to the interaction between EPS and photocatalyst to promote the design and application of the photocatalytic.     

偏分复用系统中偏振模色散补偿与偏分解复用一体化方案

本文建立了偏分复用系统中偏振模色散与信号偏振态变化引起信道串扰的数学模型, 分析了偏振模色散对偏分复用信道射频功率的影响, 并提出了适用于偏分复用系统的光域偏振模色散补偿与偏分解复用同时进行的方案: 用信道的射频功率作为反馈控制信号, 监测链路中偏振模色散和偏振态变化引起的信道串扰的大小, 用改进的粒子群优化算法对偏振控制器进行自适应控制, 同时完成偏振模色散补偿与偏分解复用. 在112 Gb/s偏分复用-差分正交相移键控(PDM-DQPSK)传输系统中仿真验证了该方案的有效性. 结果表明该方案可以使112 Gb/s-PDM-DQPSK传输系统完成自适应偏分解复用的同时, 在1 dB的光信噪比代价下, 使系统对偏振模色散的容忍度提高20 ps. 关键词： 偏分复用系统 信道串扰 偏振模色散 偏分解复用     

离散式任意充磁角度Halbach永磁电机解析模型研究

Halbach电机因其自身优势在新型船舶推进、海洋洋流发电等方面受到广泛关注. 本文在假设铁磁材料线性和定子内表面光滑的条件下, 通过将任意充磁角度Halbach阵列等效为两组90° Halbach(或180° Halbach)阵列的矢量合成, 提出了一种分析离散式任意充磁角度Halbach永磁电机气隙磁场的解析方法; 通过对电机中磁标量势的傅里叶级数进行计算, 推导出了最简单的90° Halbach永磁电机在极坐标系下的气隙磁密表达式, 并在此基础上, 给出了任意充磁角度Halbach电机永磁体磁化强度在一个极下的表达式, 进而得出任意充磁角度Halbach电机气隙磁密的分布, 并分析了气隙磁密与电机极对数、永磁体厚度和充磁角度间的关系. 最后通过有限元和试验结果验证了本文方法的正确性. 关键词： 离散式Halbach电机 任意充磁角度 矢量等效 解析模型     

Simulation of pedestrian counter flow through bottlenecks by using an agent-based model

Considerable research has been conducted on the topic of unidirectional evacuations from exits. However, few studies aim at simulating counter flow through a bottleneck with complex conflict. This paper proposes an agent-based model to investigate bidirectional flow evacuation. Pedestrian speed is determined by the speed of the leading agent and the surrounding agents. The moving direction of pedestrian originates from four forces, namely, gradient force, repulsive force, resistance force, and random force. These four forces dominate the main stream of the pedestrian moving trajectory, the interaction between pedestrians and their local environment, the resistance or disinclination to movement, and the random variations and chaotic nature of pedestrian dynamics. The novelty of this research is in the agent-based model that combines the agent and forces while providing insights for the simulation of the pedestrian dynamic on the cognitive level. The experiment results show that the behavior that arises from this model is consistent with the observations from Guangzhou Metro and that this model could help capture the essence of pedestrian behavior near egresses.     

TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

Tribological Behavior of Multiply-Alkylated Cyclopentanes (MACs)-Cu Nanoparticles Composite Thin Film

Multiply-alkylated cyclopentanes (MACs) composite thin films containing Cu nanoparticles are fabricated on the octadecyltrichlorosilane (OTS)-modified substrate by a spin-coating technique. The thickness, wetting behavior, and nanoscale morphologies of the films are characterized by means of ellipsometry, contact angle measurement, and atomic force microscope (AFM). The friction and wear behaviors of the thin films sliding against Si₃N₄ ball are examined on a UMT-2MT tribometer in a ball-on-disk contact mode. The worn surfaces of the OTS-MAC-Cu composite film and the counterpart Si₃N₄ balls are investigated with a scanning electron microscope. Water contact angle on OTS-MAC-Cu composite film is higher than that of OTS-MAC film. OTS-MAC-Cu composite film exhibits higher load-carrying capacity and better friction reduction and antiwear behavior as compared with OTS-MAC film. This may be attributed to the load-carrying and self-repairing property of the Cu nanoparticles in the composite film and the formation of a transfer layer composed of OTS, MAC, and Cu on the rubbing surface of the counterpart ball.     

Image denoising using trivariate prior model in nonsubsampled dual-tree complex contourlet transform domain and non-local means filter in spatial domain

Image denoising is always the basic problem of image processing, and the main challenge is how to effectively remove the noise and preserve the detailed information. This paper presents a new image denoising algorithm based on the combination of trivariate prior model in nonsubsampled dual-tree complex contourlet transformlet transform (NSDTCT) domain and non-local means filter (NLMF) in spatial domain. Firstly, NSDTCT is constructed by combining the dual-tree complex wavelet transform (DTCWT) and nonsubsampled directional filter banks (NSDFB). The noisy image is decomposed by using NSDTCT. Secondly, based on the correlation between the interscale and intrascale dependencies of NSDTCT coefficients, the distribution of the high frequency coefficients is modeled with the trivariate non-Gaussian distribution model. A nonlinear trivariate shrinkage function is derived in the framework of Bayesian theory, and then the denoised coefficients are obtained and inverse NSDTCT is performed to get the initial denoised image. Finally, NLMF is used to smooth the initial denoised image. Simulation experiment shows that our algorithm can obtain better performances than those outstanding denoising algorithms in terms of peak signal-to-noise ratio (PSNR), mean structural similarity (MSSIM) as well as visual quality.