有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

Evolution of planetary boundary layer under different weather conditions,and its impact on aerosol concentrations

A field experiment was conducted in Tianjin, China from September 9–30, 2010, focused on the evolution of Planetary Boundary Layer (PBL) and its impact on surface air pollutants. The experiment used three remote sensing instruments, wind profile radar (WPR), microwave radiometer (MWR) and micro-pulse lidar (MPL), to detect the vertical profiles of winds, temperature, and aerosol backscattering coefficient and to measure the vertical profiles of surface pollutants (aerosol, CO, SO₂, NO_x), and also collected sonic anemometers data from a 255-m meteorological tower. Based on these measurements, the evolution of the PBL was estimated. The averaged PBL height was about 1000–1300 m during noon/afternoon-time, and 200–300 m during night-time. The PBL height and the aerosol concentrations were anti-correlated during clear and haze conditions. The averaged maximum PBL heights were 1.08 and 1.70 km while the averaged aerosol concentrations were 52 and 17 μg/m³ under haze and clear sky conditions, respectively. The influence of aerosols and clouds on solar radiation was observed based on sonic anemometers data collected from the 255-m meteorological tower. The heat flux was found significantly decreased by haze (heavy pollution) or cloud, which tended to depress the development of PBL, while the repressed structure of PBL further weakened the diffusion of pollutants, leading to heavy pollution. This possible positive feedback cycle (more aerosols → lower PBL height → more aerosols) would induce an acceleration process for heavy ground pollution in megacities.     

On the random conjugate spaces of a random locally convex module

Theoretically speaking, there are four kinds of possibilities to define the random conjugate space of a random locally convex module. The purpose of this paper is to prove that among the four kinds there are only two which are universally suitable for the current development of the theory of random conjugate spaces. In this process, we also obtain a somewhat surprising and crucial result: if the base (Ω, F , P ) of a random normed module is nonatomic then the random normed module is a totally disconnected topological space when it is endowed with the locally L0 -convex topology.     

固体火箭发动机振动试验夹具优化分析与研究

通过相同激励条件下对三种典型振动试验夹具进行宽频段随机振动试验分析,发现夹具在试验频段内出现不同程度的共振现象,过试验现象严重。通过三种典型振动试验夹具质量、一阶固有频率、位移变化量及应变变化量等数据对比、分析,得出影响振动试验夹具振动传递特性的主要因素,以影响因素为优化变量,以典型部位平均响应与输入的振动传递比为优化目标,进行拓扑优化设计,最终经过夹具振动试验验证,过试验情况得到有效控制,满足相关规范要求,为固体火箭发动机振动试验控制提供保障。     

一种新的USED CARS相位匹配实现技术

相位匹配是相干反斯托克斯拉曼散射(CARS)测温的关键技术之一,针对现有非稳腔空间增强探测(USED)相位匹配方式中存在的背景辐射大、光路调试不灵活以及斯托克斯光利用率低的不足,提出了一种新的USED CARS相位匹配实现方案：即设计一个与斯托克斯光斑大小相当、呈45°斜角的斜反镜,用于反射全部斯托克斯光,并以斜反镜代替传统USED CARS中的环反镜,让泵浦光从斜反镜后方射入,从而形成USED相位匹配方式。新的USED CARS相位匹配方案中：由于斜反镜面积相对于环反镜大为减小,使得因反射而进入光路的背景辐射大幅降低;斜反镜本身可作为光路调节元件,因而增加了光路调试灵活度;斯托克斯光被斜反镜全部反射用于产生CARS信号,提高了其利用效率。基于平面火焰炉稳态火焰开展的测温实验结果表明：新的USED CARS相位匹配方案不但克服了传统USED CARS中存在的不足,而且具有更小的标准差,是一种更为有效的相位匹配方法。     

稀土掺杂磷酸钇荧光粉的控制合成和发光性能

利用水热法分别合成了Ce~(3+)、Tb~(3+)共掺杂的YPO_4下转换荧光粉和Er~(3+)、Yb~(3+)、Tm~(3+)共掺杂的YPO_4上转换荧光粉,经过工艺优化获得了1μm左右尺寸均匀的发光材料。通过系列实验研究了反应温度、反应时间、稀土离子掺杂比例和退火温度对样品发光性能的影响。YPO_4∶Ce~(3+),Tb~(3+)荧光粉在295 nm紫外光的激发下产生下转换发光效应,当Tb~(3+)摩尔分数为1%时得到明亮的绿光;YPO_4∶Er~(3+),Tm~(3+),Yb~(3+)荧光粉在980nm近红外光激发下产生上转换发光效应,当稀土离子中Er~(3+)摩尔分数为3%时,所制备的样品经过1 000℃退火处理后发出很强的暖白光。     

Laguerre expansion on the Heisenberg group and Fourier-Bessel transform on ?n

Given a principal value convolution on the Heisenberg group H _n = ℂ ⁿ × ℝ, we study the relation between its Laguerre expansion and the Fourier-Bessel expansion of its limit on ℂ ⁿ . We also calculate the Dirichlet kernel for the Laguerre expansion on the group H _n . Dedicated to Professor Sheng GONG on the occasion of his 75th birthday     

不同加载速率下砂岩弯曲破坏的细观机理

岩石细观破裂形貌是岩石破坏机制的重要反映,为研究不同加载速率对砂岩弯曲破坏的影响,通过三点弯曲实验和扫描电镜方法,对某煤矿关键层砂岩弯曲破断裂纹细观形态以及裂纹的自相似性进行了研究。选取6个不同加载速率对岩样进行三点弯曲实验,观察其宏观断裂情况,并利用扫描电镜对弯曲断裂面表面裂纹细观结构进行观察,并拍摄不同倍数下的扫描电镜图片。对图片进行图像处理后得到砂岩弯曲断裂破坏细观裂纹信息,并计算得到微裂纹的分形盒维数值。结果显示:随着加载速率的提高,砂岩穿晶断裂的比例也随之升高,裂纹分形维数亦随着加载速率的增大而增加,同时,分形维数还与弯曲断裂破坏荷载和抗弯强度成正比。可见,加载速率对断裂方式有一定的影响,且加载速率越大断裂所需的破坏能越大,裂纹分布越广,表明开采速度与岩爆等岩体动力灾变有密切关系。     

流动注射-阳离子交换预富集-ICP-AES 法在线分析磷矿中钙、镁、铝、铁的研究

用 732型强酸性阳离子交换树脂分离富集 ,并与改进的流动注射 (双流路 )相结合 ,建立了新型、高效的流动注射 -阳离子交换预富集 - ICP- AES在线分析体系。研究了酸度、流速、淋洗剂浓度等的选择、共存离子的干扰情况并应用于矿样的分析。 Ca,Mg,Al,Fe各元素的检出限分别为 0 .9μg/ L,0 .6 μg/ L,5.5μg/ L,1 .4μg/ L;1 0次测量的相对标准偏差分别为 3.4 4% ,1 .53% ,1 .6 0 % ,2 .58%。回收率在 93.0 %～ 1 0 1 .4 %之间。分析速度可达每小时 4 0个样品。     

Erratum to "Aerosol pollution in China: Present and future impact on environment"

PARTICUOLOGY regrets that the above paper was mistakenly classified as a ‘Review’ rather than an ‘Invited paper’ when originally published in volume 7, issue 6, 426–431.