CONSTRUCTION OF SOME KIESSWETTER-LIKE FUNCTIONS-THE CONTINUOUS BUT NON-DIFFERENTIABLE FUNCTION DEFINED BY QUINARY DECIMAL

In this paper, we construct some continuous but non-differentiable functions defined by quinary decimal, that are Kiesswetter-like functions. We discuss their properties, then investigate the Hausdorff dimensions of graphs of these functions and give a detailed proof.     

La掺杂浓度对PLZT薄膜红外光学性质的影响

采用溶胶-凝胶法在Pt/Ti/SiO2/Si衬底上制备了不同La掺杂浓度PLZT(x/40/60)薄膜- x射线衍射分析表明制备的PLZT(x/40/60)薄膜是具有单一钙钛矿结构的多晶薄膜- 通过红外椭圆偏振光谱仪测量了波长为2-5—12-6μm范围内PLZT薄膜的椭偏光谱，采用经典色 散模型拟合获得PLZT薄膜的红外光学常数，同时也拟合获得PLZT薄膜的厚度- 随着La掺杂浓 度的增大，折射率逐渐减小- 而消光系数除PLZT(4/40/60)薄膜外，呈现逐渐增大的趋势- 分析表明这些差异主要与PLZ 关键词： PLZT薄膜 红外光学性质 红外椭圆偏振光谱     

A note on an SOR-like method for augmented systems

Golub et al. (2001, BIT, 41, 71–85) gave a generalizedsuccessive over-relaxation method for the augmented systems.In this paper, the connection between the SOR-like method andthe preconditioned conjugate gradient (PCG) method for the augmentedsystems is investigated. It is shown that the PCG method isat least as accurate (fast) as the SOR-like method. Numericalexamples demonstrate that the PCG method is much faster thanthe SOR-like method.     

用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。     

A Note on Rings and Modules Graded by Some Special Groups

In this note we prove that the prime madicals of some graded rings and the scoles of some graded modules are also graded. The results on the relations between the prime radical and the graded prime radical are also presented. Moreover, the relations between a graded ring and its initial subring are studied.     

Cs-Fe-Co-Bi-Mn-Mo复合氧化物选择性催化氧化异丁烯

Mixed oxide catalyst Cs0.1 Fe2Co6BiMnMo12 Ox was prepared by the interprecipitation method, then the catalyst was calcined at different temperature. Selective oxidation of isobutene was carried out in a fixed-bed reactor. The results showed that the catalyst has high catalytic activity. Under the optimum reaction conditions ( n(-C4^= ) : n(O2) = 1:2-1:4, space velocity = 180h^-1, T = 360℃ ), the yield of methacmlein and methacrylic reached 80%, 8 %,respectively. The total yields of liquid products( methacrolein, methacrylic acid and acetic acid) reached about 90%.     

Alkylation of Benzene with Propene over Hβ Zeolite──The Effect of Reaction Conditions on the Distribution of Products

ＡｌｋｙｌａｔｉｏｎｏｆＢｅｎｚｅｎｅｗｉｔｈＰｒｏｐｅｎｅｏｖｅｒＨβＺｅｏｌｉｔｅ──ＴｈｅＥｆｆｅｃｔｏｆＲｅａｃｔｉｏｎＣｏｎｄｉｔｉｏｎｓｏｎｔｈｅＤｉｓｔｒｉｂｕｔｉｏｎｏｆＰｒｏｄｕｃｔｓＭＡＪｕｎ，ＳＨＥＮＪｉａｎ－ｐｉｎｇ，ＳＵＮＴ...     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

铝交联皂石的合成和表征及催化性能

用XRD、化学分析、IR、MASNMR、TPD等手段表征了合成皂石及其铝交联物的结构。结果表明:皂石的交联密度与四面体层电荷和交联条件(Al/土比)有关。在乙醇氨化反应中,交联皂石显示了较好的催化活性和选择性。皂石的交联密度与液相产物分布的关系表明层柱材料对此反应具有择形催化作用。醇氨化反应可能是在吸附态NH_3和气相醇分子间进行的。     

Probing macromolecular adsorbed layer structure and history dependence via the interfacial cavity function

Adsorbed layers of proteins and other macromolecules often relax structurally more slowly than they form, rendering layer growth an out-of-equilibrium process. We show here how the interfacial cavity function, Phi (the average Boltzmann factor for a single probe molecule), may be determined, using kinetic data available from optical waveguide lightmode spectroscopy, and used as a continuous, in situ measure of history dependent adsorbed layer structure. The increase of Phi observed with residence time for fibronectin and lysozyme layers suggests post-adsorption clustering on a time scale longer than that predicted by a surface diffusion model.