Synthesis of benzopyran derivatives,XV Preparation of arylsulfonyloxy-2,2-dimethyl-2H-chromenes

Summary Arylsulfonyloxy-2,2-dimethyl-2H-chromenes (26–35) have been synthesized by reduction of arylsulfonyloxy-2,2-dimethyl-4-chromanones (6–15) followed by dehydration.

---

Synthese von Benzopyranderviaten. 15. Mitt.: Darstellung von Arylsulfonyloxy-2,2-dimethyl-2H-chromenen

Zusammenfassung Reduktion von Arylsulfonyloxy-2,2-dimethyl-4-chromanonen (6–15) und anschließende Dehydratisierung liefert Arylsulfonyloxy-2,2-dimethyl-2H-chromene (26–35).

     

Treating singularities present in the Sutcliffe-Tennyson vibrational Hamiltonian in orthogonal internal coordinates

Two methods are developed, when solving the related time-independent Schrodinger equation (TISE), to cope with the singular terms of the vibrational kinetic energy operator of a triatomic molecule given in orthogonal internal coordinates. The first method provides a mathematically correct treatment of all singular terms. The vibrational eigenfunctions are approximated by linear combinations of functions of a three-dimensional nondirect-product basis, where basis functions are formed by coupling Bessel-DVR functions, where DVR stands for discrete variable representation, depending on distance-type coordinates and Legendre polynomials depending on angle bending. In the second method one of the singular terms related to a distance-type coordinate, deemed to be unimportant for spectroscopic applications, is given no special treatment. Here the basis set is obtained by taking the direct product of a one-dimensional DVR basis with a two-dimensional nondirect-product basis, the latter formed by coupling Bessel-DVR functions and Legendre polynomials. With the basis functions defined, matrix representations of the TISE are set up and solved numerically to obtain the vibrational energy levels of H3+. The numerical calculations show that the first method treating all singularities is computationally inefficient, while the second method treating properly only the singularities having physical importance is quite efficient.     

Novel method for the preparation of anionic surfactant-selective electrodes

A simple one-step synthesis is described for the functionalization of poly(vinyl chloride) used for the preparation of anionic surfactant-selective membrane electrodes. The method is based on the nucleophilic substitution of a fraction of the chlorine atoms bound to the poly(vinyl chloride) backbone by trimethylamine. The prepared slightly charged polymer gave rise to high-quality surfactant-selective electrode membranes, which had a Nernstian response, short response time, and appropriate stability.     

Controlled introduction of allylic chlorines into poly(vinyl chloride)

Colorless poly(vinyl chloride)s (PVC) containing up to 1.6 allylic chlorines per molecule have been prepared by controlled random dehydrochlorination with a strong base. The effect of temperature in the ?50 to +24°C range on the number of allylic chlorines and color of PVC has been investigated by ozonization experiments and UV–visible spectroscopy. A two-parameter kinetic model has been developed which quantitatively accounts for the observations and points the way for further research.     

Coulometric redox titrations of hydrazine,phenylhydrazine and isoniazid with electrogenerated lead(IV) acetate and manganese(III) acetate in acetic acid

Summary The conditions fox coulometric determination of small quantities of hydrazine, phenylhydrazine and isoniazid in glacial acetic acid with electrogenerated manganese(III) acetate and lead(IV) acetate were investigated. With the direct coulometric method at room temperature, good results were obtained in the determination of hydrazine and isoniazid with lead(IV) acetate and in the determination of phenylhydrazine with manganese(III) acetate. Hydrazine and isoniazid can also be determined by the coulometric back-titration method if the oxidation with manganese(III) acetate is performed at elevated temperature.

---

Zusammenfassung Die Bedingungen für die coulometrische Bestimmung kleiner Mengen Hydrazin, Phenylhydrazin und Isoniazid mit elektrolytisch erzeugtem Mangan(III)-Acetat und Blei(IV)-Acetat in Eisessig wurden untersucht. Bei Zimmertemperatur wurden gute Resultate durch direkte coulometrische Titration des Hydrazins und Isoniazids mit Blei(IV)-Acetat und bei Titration des Phenylhydrazins mit Mangan(III)-Acetat erhalten. Durch coulometrische Rücktitration können bei höheren Temperaturen Hydrazin und Isoniazid mit Mangan(III)-Acetat erfolgreich bestimmt werden.

     

Effect of polymer molecular weight on the polymer/surfactant interaction

A thermodynamic analysis of the interaction between fourteen different molar mass poly(ethylene oxide)s (PEO) and sodium dodecyl sulfate (SDS) based on the measured surfactant-binding isotherms is given. The surfactant-binding isotherms were determined by the potentiometric method in the presence of 0.1 M inert electrolyte (NaBr). It was found that there is no PEO/SDS complex formation if M(PEO) < 1000. In the molecular weight range 1000 < M(PEO) < 8000, the critical aggregation concentration (cac) and the surfactant aggregation number are decreasing as the polymer molecular weight increases. The saturated bound surfactant amount is proportional to the number concentration of the polymer in this molecular weight range. If M(PEO) exceeds approximately 8000, the cac does not depend on the polymer molar mass, and the saturated bound amount of the surfactant becomes proportional to the mass concentration of the polymer. It was also observed that independently of the polymer molecular weight the surfactant aggregation number increases as the equilibrium surfactant monomer concentration increases from the cac to the critical micellar concentration (cmc). Finally, it was demonstrated that only one polymer molecule is involved in the complex formation independently of the polymer molecular weight.     

Rate constant for the reaction of OH radicals with CH3C(O)Cl determined by direct kinetic method

Summary The fast flow technique with OH resonance fluorescence detection has been applied at T = 298 ± 2 K to study the kinetics of the overall reaction: H + CH₃C(O)Cl → products (1) A rate constant value of k₁ = (1.02 ± 0.12) x 10¹⁰ cm³ mol^-1 s^-1 has been determined which is the first direct kinetic parameter reported for reaction (1) in the literature (the error given refers to 2σ accuracy).     

Electrochemical generation of manganese(III) and behaviour of the generated oxidant in acetic acid in the presence of perchlorate ions

Summary Research was carried out to determine conditions for the anodic generation of manganese(III) with high current efficiency in solutions of sodium perchlorate in acetic acid, and to examine the behaviour of the oxidant thus generated. The effects of water and acetic anhydride on current efficiency in the generation of the oxidant was also examined. The formal redox potential of the Mn(III)/ Mn(II) system is decreased with increasing concentrations of sodium acetate in the solution. The effect of sodium perchlorate and perchloric acid concentrations is the reverse. Procedures for coulometric titrations of a number of substances with the generated oxidant were developed, end point being detected using biamperometric and potentiometric methods. Perchloric acid accelerates the oxidation of certain substances with manganese(III) in acetic acid and increases the sensitivity of end-point detection using the potentiometric method.

---

Elektrochemische Erzeugung von Mangan(III) und das Verhalten dieses Oxydationsmittels in Essigsäure bei Gegenwart von Perchlorat

Zusammenfassung Die Bedingungen der anodischen Erzeugung von Mangan(III) mit hoher Stromausbeute in Essigsäure, nach Zugabe von Natriumperchlorat wurden untersucht; das elektrochemische Verhalten des so dargestellten Oxydationsmittels wurde ebenfalls untersucht. Der Einfluß von Wasser und Essigsäureanhydrid auf die prozentuelle Stromausbeute des erwähnten Oxydationsmittels wurde verfolgt. Das Formalredoxpotential des Systems Mn(III)/ Mn(II) sinkt bei Erhöhung der Konzentration an Natriumacetat in der Lösung. Perchlorsäure wie auch Natriumperchlorat üben eine entgegengesetzte Wirkung aus und führen zur Steigerung des Formalredoxpotentials bei Erhöhung ihrer Konzentration. Verfahren zur coulometrischen Titration verschiedener Substanzen mittels biamperometrischer oder potentiometrischer Erfassung des Titrationsendpunktes wurden ausgearbeitet. In Gegenwart von Perchlorsäure wächst die Geschwindigkeit der Oxydation einiger Substanzen in Essigsäure in Gegenwart von Mn(III) und auch die Empfindlichkeit der Endpunktbestimmung verbessert sich.

---

---

Presented at the 9th International Symposium on Microchemical Techniques, Amsterdam, August 28–September 2, 1983.     

Glycosylation site analysis of human alpha-1-acid glycoprotein (AGP) by capillary liquid chromatography-electrospray mass spectrometry

A new anionic surfactant (RapiGest SF) was successfully used for site-specific analysis of glycosylation in human alpha-1-acid glycoprotein (AGP). By means of this analytical approach combined with capillary HPLC-mass spectrometry (and tandem mass spectrometry), the N-linked glycosylation pattern of AGP was explored. On the basis of mass matching and MS/MS experiments ca 80 different AGP-derived glycopeptides were identified. Glycosylation shows a markedly different pattern for the various glycosylation sites. At sites I and II, triantennary complex-type oligosaccharides predominate and at sites III, IV and V, tetra-antennary complex-type oligosaccharides predominate. Sites IV and V show the presence of additional N-acetyl lactosamine (Gal-GlcNAc) units (even higher degree of branching and/or longer antennae are also present).     

Syntheses and PE-Spectroscopic Investigations of 2,6- and 3,5-Bridged 1,4-Dimethylidenecyclohexanes

Three 1,4-dimethylidenecyclohexanes, bridged in the 2,6- and 3,5-positions by two ethano ( 4 ), one ethano and one propano ( 5 ), and two propano bridges ( 6 ) have been synthesized. The interaction of the two exocyclic methylidene groups has been investigated by He(I) photoelectron (PE) spectroscopy. It revealed a slightly larger energy difference (0.8 eV) for 4 and 5 as compared to the parent 1,4-dimethylidenecyclohexane ( 7 ) (0.7 eV). The interpretation of the PE spectra was based on the comparison with PE data of related systems and with the results of semiempirical calculations on 4–6 .