Highly fluorous complexes of nickel, palladium and platinum: solubility and catalysis in high pressure CO2

A variety of Group 10 metal complexes [MXY(dfppp)], M = Ni, X, Y = Cl, Br, M = Pd, Pt, X, Y = Cl or CH(3), containing the recently reported highly fluorous diphosphine ligand, dfppp, 1,3-bis[di(fluoroponytail)phosphino]propane, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(3) have been synthesised. They have been characterised by NMR, mass spectrometry and microanalysis, with two platinum complexes, [PtCl(2)(dfppp)] and [PtClMe(dfppp)], structurally characterised by single crystal X-ray diffraction studies. The highly fluorous nature of the ligands affords the complexes good supercritical CO(2) solubility as measured by supercritical fluid extraction (SFE), and has allowed for the copolymerisation of CO and ethylene using [PdClMe(dfppp)] as the catalyst precursor and CO(2) as the solvent. Additionally, PtCl(2) complexes of the new ligands dfppb, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(4), and dfpop, {(p-F(13)C(6)C(6)H(4)O)(2)P}(2)(CH(2))(3), have also been prepared and characterised.     

Integrated thin-film polymer/fullerene photodetectors for on-chip microfluidic chemiluminescence detection

We report the use of solution-processed thin-film organic photodiodes for microscale chemiluminescence. The active layer of the photodiodes comprised a 1 : 1 blend by weight of the conjugated polymer poly(3-hexylthiophene) [P3HT] and [6,6]-phenyl-C(61)-butyric acid-methylester [PCBM]--a soluble derivative of C(60). The devices had an active area of 1 mm x 1 mm, and a broad-band response from 350 to 700 nm, with an external quantum efficiency of more than 50% between 450 and 550 nm. The photodiodes have a simple layered structure that permits facile integration with planar chip-based systems. To evaluate the suitability of the organic devices as integrated detectors for microscale chemiluminescence, a peroxyoxalate based chemiluminescence reaction (PO-CL) was monitored within a poly(dimethyl-siloxane) (PDMS) microfluidic device. Quantitation of hydrogen peroxide indicated excellent linearity and yielded a detection limit of 10 microM, comparable with previously reported results using micromachined silicon microfluidic chips with integrated silicon photodiodes. The combination of organic photodiodes with PDMS microfluidic chips offers a means of creating compact, sensitive and potentially low-cost microscale CL devices with wide-ranging applications in chemical and biological analysis and clinical diagnostics.     

Pulsed and continuous wave acrylic acid radio frequency plasma deposits: plasma and surface chemistry

Plasma polymers have been formed from acrylic acid using a pulsed power source. An on-pulse duration of 100 micros was used with a range of discharge off-times between 0 (continuous wave) and 20,000 micros. X-ray photoelectron spectroscopy (XPS) has been used in combination with trifluoroethanol (TFE) derivatization to quantify the surface concentration of the carboxylic acid functionality in the deposit. Retention of this functionality from the monomer varied from 2% to 65%. When input power was expressed as the time-averaged energy per monomer molecule, E(mean), the deposit chemistry achieved could be described using a single relationship for all deposition conditions. Deposition rates were monitored using a quartz crystal microbalance, which revealed a range from 20 to 200 microg m(-2) s(-1), and these fell as COOH functional retention increased. The flow rate was found to be the major determinant of the deposition rate, rather than being uniquely defined by E(mean), connected to the rate at which fresh monomer enters the system in the monomer deficient regime. The neutral species were collected in a time-averaged manner. As the energy delivered per molecule in the system (E(mean)) decreased, the amount of intact monomer increased, with the average neutral mass approaching 72 amu as E(mean) tends to zero. No neutral oligomeric species were detected. Langmuir probes have been used to determine the temporal evolution of the density and temperature of the electrons in the plasma and the plasma potential adjacent to the depositing film. It has been found that even 500 micros into the afterglow period that ionic densities are still significant, 5-10% of the on-time density, and that ion accelerating sheath potentials fall from 40 V in the on-time to a few volts in the off-time. We have made the first detailed, time- and energy-resolved mass spectrometry measurements in depositing acrylic acid plasma. These have allowed us to identify and quantify the positive ion species in the acrylic acid plasma during both the on- and the off- periods. The relative intensities of oligomeric species of the type [nM + H]+ as large as n = 3 were observed to increase in the off-time suggesting vapor phase polymerization after power input to the plasma was ceased. The energy distribution functions of these ions demonstrated that they were produced in the plasma in both the on- and the off-times. This remarkable observation contradicts the assumptions usually made when speculating on pulsed plasma that ions have very short lifetimes, although it is anticipated that radicals still have significantly longer lifetimes, estimated from calculation to be in excess of 1 ms. The increase in average positive ion mass during the off-period can be related to the lower mobility of the heavier components, reducing their relative loss to surfaces, and the polymer chain growth in the gas phase due to the ion-neutral collisions. The implications of these observations are discussed in light of polymerization mechanisms proposed from continuous acrylic acid and millisecond pulsing plasmas.     

Synthesis of tetra-ortho-substituted, phosphorus-containing and carbonyl-containing biaryls utilizing a Diels-Alder approach

The application of the Diels-Alder approach to biaryls (DAB) is described for the synthesis of tetra-ortho-substituted biaryl compounds containing orthogonally functionalized substituents. The syntheses of phosphorus-containing, disubstituted alkynes and carbonyl-containing, disubstituted alkynes were accomplished in two to three steps from commercially available reagents. Subsequent Diels-Alder cycloadditions with a range of oxygenated dienes yielded the target biaryls. Further functionalization through palladium-couplings is demonstrated on the phosphorus-containing biaryls. In addition, selective manipulation of each of the remaining ortho substituents on the phosphorus-containing biaryls is demonstrated. One of these phosphorus-containing derivatives is utilized as a highly active catalyst for Suzuki coupling. For the carbonyl-containing series, a wide range of dienophile substituents were screened including esters, ketones, and amides. The key Diels-Alder cycloadditions proceeded smoothly with the commercially available 1-methoxy-1,3-cyclohexadiene to yield the resultant tetra-ortho-substituted biaryls with excellent regioselectivity. The scope of the cycloaddition process was also explored on the carbonyl-containing dienophiles with a series of cyclic dienes. Acyclic dienes were also screened; however, they did not prove effective in the Diels-Alder process with the carbonyl-containing acetylenes. The ability to isolate enantiomerically pure biaryl atropisomers using a benzyl oxazolidinone is disclosed. Finally, the subsequent conversion to an axially chiral anilino alcohol is also reported.     

Calibrant delivery for mass spectrometry

This article describes a means of sampling ions that are created at a location remote from the primary ion source used for mass spectral analysis. Such a source can be used for delivery of calibrant ions on demand. Calibrant ions are sprayed into an atmospheric pressure chamber, at a position substantially removed from the sampling inlet. A gas flow sweeps the calibrants towards the sampling inlet, and a new means for toggling the second ion beam into the instrument can be achieved with the use of a repelling field established by an electrode in front of the sampling inlet. The physical separation of two or more sources of ions eliminates detrimental interactions due to gas flows or fields. When using a nanoflow electrospray tip as the primary ion source, the potential applied to the tip completely repels calibrant ions and there is no compromise in terms of electrospray performance. When calibrant ions are desired, the potential applied to the nanoflow electrospray tip is lowered for a short period of time to allow calibrant ions to be sampled into the instrument, thus providing a means for external calibration that avoids the typical complications and compromises associated with dual spray sources. It is also possible to simultaneously sample ions from multiple ion beams if necessary for internal mass calibration purposes. This method of transporting additional ion beams to a sampling inlet can also be used with different types of atmospheric pressure sources such as AP MALDI, as well as sources configured to deliver ions of different polarity.     

Discovery of a Highly Selective Glycogen Synthase Kinase‐3 Inhibitor (PF‐04802367) That Modulates Tau Phosphorylation in the Brain: Translation for PET Neuroimaging

Glycogen synthase kinase‐3 (GSK‐3) regulates multiple cellular processes in diabetes, oncology, and neurology. N‐(3‐(1H‐1,2,4‐triazol‐1‐yl)propyl)‐5‐(3‐chloro‐4‐methoxyphenyl)oxazole‐4‐carboxamide (PF‐04802367 or PF‐367) has been identified as a highly potent inhibitor, which is among the most selective antagonists of GSK‐3 to date. Its efficacy was demonstrated in modulation of tau phosphorylation in vitro and in vivo. Whereas the kinetics of PF‐367 binding in brain tissues are too fast for an effective therapeutic agent, the pharmacokinetic profile of PF‐367 is ideal for discovery of radiopharmaceuticals for GSK‐3 in the central nervous system. A ¹¹C‐isotopologue of PF‐367 was synthesized and preliminary PET imaging studies in non‐human primates confirmed that we have overcome the two major obstacles for imaging GSK‐3, namely, reasonable brain permeability and displaceable binding.     

Lactic acid demineralization of green crab (Carcinus maenas) shells: effect of reaction conditions and isolation of an unusual calcium complex

Chitin and chitosan are potentially useful and environmentally friendly biopolymers with a wide range of value-added applications. Effective and green technologies for isolation of these materials are potentially important. Here, we report the use of lactic acid for the demineralization of green crab shells. Green crab shells and lactic acid, produced during cheese making, are two waste streams that could be tapped for large-scale chitin and chitosan processing. We have studied the effect of concentration and temperature on the demineralization of green crab shells. An unusual calcium lactate/lactic acid complex was also isolated and crystallographically characterized. The results have implications not only for the use of weak acids in the isolation of chitin and chitosan but also for the use of lactic acid as a solvent in green chemistry.     

Wavelength dependence of nitrate radical quantum yield from peroxyacetyl nitrate photolysis: experimental and theoretical studies

The photolysis wavelength dependence of the nitrate radical quantum yield for peroxyacetyl nitrate (CH(3)C(O)OONO(2), PAN) is investigated. The wavelength range used in this work is between 289 and 312 nm, which mimics the overlap of the solar flux available in the atmosphere and PAN's absorption cross section. We find the nitrate radical quantum yield from PAN photolysis to be essentially invariant; Phi(NO3)(PAN) = 0.30 +/- 0.07 (+/-2sigma) in this region. The excited states involved in PAN photolysis are also investigated using ab initio calculations. In addition to PAN, calculations on peroxy nitric acid (HOONO(2), PNA) are performed to examine general photochemical properties of the -OONO(2) chromophore. Equation of motion coupled cluster calculations (EOM-CCSD) are used to examine excited state energy gradients for the internal coordinates, oscillator strengths, and transition energies for the n --> pi* transitions responsible for the photolysis of both PNA and PAN. We find in both molecules, photodissociation of both O-O and O-N bonds occurs via excitation to predissociative electronic excited states and subsequent redistribution of that energy as opposed to directly dissociative excitations. Comparison and contrast between experimental and theoretical studies of HOONO(2) and PAN photochemistry from this and other work provide unique insight on the photochemistry of these species in the atmosphere.