一种生物柴油代用品在HZSM-5分子筛催化剂上的催化热解

为了深入了解生物柴油在ZSM-5沸石上的催化反应机理,在常压的流动反应器中进行了生物柴油代用品丁酸甲酯在氢型ZSM-5(HZSM-5)催化剂上的热解和催化热解. 热解产物使用气相色谱-质谱法定性和定量测量. 动力学模型和实验表明,气相中氢提取反应是热解过程中丁酸甲酯分解的主要途径,但在HZSM-5上,丁酸甲酯则主要通过解离生成烯酮和甲醇消耗;与无催化反应相比,丁酸甲酯在HZSM-5上的初始分解温度降低了约300 K. 并且通过Arrhenius方程获得了在催化热解和均相热解条件下丁酸甲酯消耗的表观活化能. 明显降低的表观活化能证实了HZSM-5对丁酸甲酯热解的催化性能. 此外催化剂的活化温度对HZSM-5的某些催化性能具有一定的影响. 该研究对进一步的实际生物柴油燃料的催化燃烧具有一定的指导意义.     

非线性柱形涂层复合介质有效的直流-交流电响应

利用摄动展开方法, 研究了由圆柱形带涂层杂质随机嵌入基质所形成的非线性复合介质在外加 的带有不同频率和振幅的混合电场E₀ + E₁ sinωt+E₃ sin3ωt作用下有效的直流-交流电响应, 分别推导了复合介质在杂质核、涂层及基质区域的电势分布, 并在低杂质浓度下给出了复合介质有效的非线性响应及它们之间的关系. 关键词： 非线性柱形涂层复合介质 有效的非线性响应 外加交直流电场     

600MeV ~(18)O+~(nat)Pb(厚靶)系统生成Hg同位素独立产额测量(Ⅱ)结果与分析

报道了600MeV（18）O轰击（nat）Ph（厚靶）生成的质量数在180—209之间的Hg同位素产物独立截面的测量结果．通过与600MeV质子轰击天然铅靶生成Hg同位素产额分布的比较，讨论了几个质量区段Hg同位素的生成机制．测量结果也与相对论重离子碎裂反应双质子移出道的产额分布进行了比较．结果表明，中能重离子与中子较富集靶核组成的反应系统对生成丰中子类靶余核具有较明显的优势．     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.     

One-pot synthesis of benzylacetamide from oxime under ultrasound irradiation

One-pot synthesis of benzylacetamide from oxime can be carried out in 80–95% yield at 35–40 °C under ultrasound irradiation. This method provided several advantages such as simple work-up procedure, shorter reaction time and higher yield.     

Structure and magnetic properties of Nb-doped FeZrB soft magnetic alloys

Structure and magnetic properties of Nb-doped (FeZrB)_100−xNb_x alloy are investigated by X-ray diffraction (XRD), differential scanning calorimetry and vibrating sample magnetometer. The fully amorphous structure of the as-quenched ribbons is confirmed by the XRD pattern. With increasing Nb, the glass transition temperature and the onset crystallization temperature are increased, indicating increased stability of the amorphous structure. For x=1, the saturation magnetization of the ribbons is 125.7 emu/g and the optimized annealing temperature increases from 550 to 630 °C. The morphology of the crystallized phases is observed by scanning electron microscopy. The results show that nanocrystalline α-Fe grains are dispersed in the amorphous matrix.     

Characterization of microstructures induced in the workpiece of aluminum alloy by excimer laser micromachining

Excimer laser emitting at 248 nm is applied to produce microstructures on the surface of aluminum alloy. The surface morphology shows that hotspots and thermal fluidic structures both come to light. Two possible mechanisms of hotspots formation are proposed: near-field diffraction and interference, and extremely fast rapid thermal annealing. And for the formation of thermal fluidic pattern structure, a thin film model is applied.     

飞秒激光激发空气电离的阈值研究

报道在脉宽50fs—22ps，波长800nm脉冲激光作用下的空气电离阈值的研究结果.利用探测等离子体发光信号的方法，实验测量了激发空气电离所需的阈值激光强度.结果表明，当激光脉冲宽度从50fs增加到22ps时，阈值光强I_th从8.7×10¹⁴W/cm²下降到2.7×10¹³W/cm²；I_th经历了由迅速降低逐渐发展为缓慢降低的过程.在50fs—1p     

On thek dimensional Piatetski-Shapiro prime number theorem

Thek-dimensional Piatetski-Shapiro prime number problem fork⩾3 is studied. Let π(x ₁ c ₁,⋯,c _k ) denote the number of primesp withp⩽x, , where 1<c ₁<⋯<c _k are fixed constants. It is proved that π(x;c ₁,⋯,c _k ) has an asymptotic formula ifc ₁ ⁻¹ +⋯+c _k ⁻¹ >k−k/(4k ²+2). Project supported by the National Natural Science Foundation of China (Grant No. 19801021) and the Natural Science Foundation of Shandong Province (Grant No.Q98A02110).     

复Fuzzy函数的Buckley导数与Buckley积分

本文对Ｊ．Ｊ．Ｂｕｃｋｌｅｙ在［１］、［２］中给出的实变量复Ｆｕｚｚｙ数值函数的导数与积分加以推广,引出复变量复Ｆｕｚｚｙ数值的导数与积分概念,为研究Ｆｕｚｚｙ复分析打下一定的基础。