The extraction of Scutellaria baicalensis Georgi was investigated using the response surface methodology-genetic algorithm mathematical regression model, and the extraction variables were optimized to maximize the flavonoid yield. Furthermore, a simple and efficient ultrafiltration–liquid chromatography–mass spectrometry and molecular docking methods were developed for the rapid screening and identification of acetylcholinesterase inhibitors present in Scutellaria baicalensis Georgi. Subsequently, four major chemical constituents, namely baicalein, norwogonin, wogonin, and oroxylin A, were identified as potent acetylcholinesterase inhibitors. This novel approach, involving the use of ultrafiltration–liquid chromatography–mass spectrometry and molecular docking methods combined with stepwise flow rate counter-current chromatography and semi-preparative high-performance liquid chromatography, could potentially provide a powerful tool for the screening and extraction of acetylcholinesterase inhibitors from complex matrices and be a useful platform for the production of bioactive and nutraceutical ingredients. 相似文献
The kinetics of U(IV) produced by hydrazine reduction of U(VI) with platinum as a catalyst in nitric acid media was studied to reveal the reaction mechanism and optimize the reaction process. Electron spin resonance (ESR) was used to determine the influence of nitric acid oxidation. The effects of nitric acid, hydrazine, U(VI) concentration, catalyst dosage and temperature on the reaction rate were also studied. In addition, the simulation of the reaction process was performed using density functional theory. The results show that the influence of oxidation on the main reaction is limited when the concentration of nitric acid is below 0.5 mol/L. The reaction kinetics equation below the concentration of 0.5 mol/L is found as: -dc(UO22+)/dt)=kc0.5323(UO22+)c0.2074(N2H5+)c-0.2009(H+). When the temperature is 50 ℃, and the solid/liquid ratio r is 0.0667 g/mL, the reaction kinetics constant is k=0.00199 (mol/L)0.4712/min. Between 20 ℃ and 80 ℃, the reaction rate gradually increases with the increase of temperature, and changes from chemically controlled to diffusion-controlled. The simulations of density functional theory give further insight into the influence of various factors on the reaction process, with which the reaction mechanisms are determined according to the reaction kinetics and the simulation results. 相似文献
The commonly used oxide-supported metal catalysts are usually prepared in aqueous phase, which then often need to undergo calcination before usage. Therefore, the surface hydration and dehydration of oxide supports are critical for the realistic modeling of supported metal catalysts. In this work, by ab initio molecular dynamics (AIMD) simulations, the initial anhydrous monoclinic ZrO\begin{document}$_2$\end{document}(111) surfaces are evaluated within explicit solvents in aqueous phase at mild temperatures. During the simulations, all the two-fold-coordinated O sites will soon be protonated to form the acidic hydroxyls (HO\begin{document}$_{\rm{L}}$\end{document}), remaining the basic hydroxyls (HO*) on Zr. The basic hydroxyls (HO*) can easily diffuse on surfaces via the active proton exchange with the undissociated adsorption water (H\begin{document}$_2$\end{document}O*). Within the temperatures ranging from 273 K to 373 K, in aqueous phase a certain representative equilibrium hydrated m-ZrO\begin{document}$_2$\end{document}(111) surface is obtained with the coverage (\begin{document}$\theta$\end{document}) of 0.75 on surface Zr atoms. Later, free energies on the stepwise surface water desorption are calculated by density functional theory to mimic the surface dehydration under the mild calcination temperatures lower than 800 K. By obtaining the phase diagrams of surface dehydration, the representative partially hydrated m-ZrO\begin{document}$_2$\end{document}(111) surfaces (0.25\begin{document}$\leq$\end{document}\begin{document}$\theta$\end{document} < 0.75) at various calcination temperatures are illustrated. These hydrated m-ZrO\begin{document}$_2$\end{document}(111) surfaces can be crucial and readily applied for more realistic modeling of ZrO\begin{document}$_2$\end{document} catalysts and ZrO\begin{document}$_2$\end{document}-supported metal catalysts. 相似文献
Plasmonic noble metal nanostructures have been targeted due to their strong surface plasmon resonance at photoelectrochemical interfaces. Recently, it has been concluded that, the plasmonic noble metal nanostructures on photoexcitation permit the transfer of effective hot carriers (hot electron/hole pair) to nearby adsorbed molecules where, the transformed hot carriers can efficiently decrease the activation barrier of a reaction. In this review, our recent achievements in the plasmon-mediated chemical reactions of organic molecules such as para-aminothiophenol, substituted para-aminothiophenol and para-nitrothiophenol at nanostructures modified noble metal electrodes using surface enhanced Raman spectroscopy, electrochemical methods, and theoretical calculations will be discussed. 相似文献
To date, luminescent materials have been preferably used for non-contact optical thermometers. In this manner, novel red-emitting Ba2Y0.8Eu0.2NbO6:Mn4+ (BYEN:Mn4+) phosphors were designed for multi-type non-contact luminescent thermometers based on the dual-emission states and temperature-dependent lifetime (TDL) models. In the temperature range of 303–483 K, the sensing sensitivities based on the dual-emission states of (5D0→7F2, 2Eg→4A2g) and (5D0→7F1, 2Eg→4A2g) were estimated. Especially, the maximum absolute sensing sensitivity (Sa) was found to be about 0.1558 K-1 for the BYEN:0.007Mn4+ phosphor based on the 5D0→7F1 and 2Eg→4A2g positions. This phosphor also exhibited good relative sensing sensitivity (Sr) (0.0186 K-1) based on the 5D0→7F2 and 2Eg→4A2g states. Besides, the relative sensing sensitivities (SR) at 5D0→7F1 and 2Eg→4A2g transitions were estimated to be 0.0034 and 0.0194 K-1, respectively with the help of the TDL technique. In the light of these results, novel red-emitting Ba2Y0.8Eu0.2NbO6:Mn4+ phosphors are expected to be a potentially attractive candidate for applications in multi-type luminescent thermometers. Finally, a novel unique polydimethylsiloxane film exhibiting tricolor-luminescent emissions was introduced and further suggested for high-security anti-counterfeiting. 相似文献
A high-temperature proton exchange membrane with high proton conductivity over a wide humidity range still remains a challenge. PBI dendrimer containing triazine rings (TPBI) was synthesized to approach this aim considering its high content of hygroscopic terminal groups and of larger free volume. A novel proton conductor previously synthesized (zirconium 3-sulfopropyl phosphonate, ZrSP) was doped due to its good proton conductivity over a wide humidity range. TPBI was post-crosslinked with a tetrafunctional epoxy resin (N,N,N′,N′-tetraglycidyl-4,4′-diaminodiphenylmethane, TGDDM) to enhance the mechanical stability at low cross-linking degrees, which allowed high doping levels of ZrSP, and thus, high conductivity. The prepared membranes (TPBI-TGDDM/ZrSP) showed good thermal stability, high proton conductivity over wide humidity range, and good dimensional stability. At suitable degrees of branching, TPBI-TGDDM/ZrSP exhibited superior mechanical property, oxidative stability, methanol barrier property, and membrane selectivity than its linear analog (mPBI-TGDDM/ZrSP). As ZrSP instead of PA was applied as the proton conductor, TPBI-TGDDM/ZrSP showed good durability of proton conductivity, especially in comparison with TPBI-TGDDM/PA, which highly retarded decline in conductivity caused by PA leaking. The proton conductivity at 180 °C of TPBI(20)-TGDDM(10)/ZrSP(50) achieved 142, 84.2 and 23.6 mS cm?1 at 100%, 50%, and 0 RH, respectively. 相似文献
Nitrogen transfer from cyanide anion to an aldehyde is emerging as a promising method for the synthesis of aromatic nitriles. However, this method still suffers from a disadvantage that a use of stoichiometric Cu(II) or Cu(I) salts is required to enable the reaction. As we report herein, we overcame this drawback and developed a catalytic method for nitrogen transfer from cyanide anion to an alcohol via the complete cleavage of the C≡N triple bond using phen/Cu2O as the catalyst. The present condition allowed a series of benzyl alcohols to be smoothly converted into aromatic nitriles in moderate to high yields. In addition, the present method could be extended to the conversion of cinnamic alcohol to 3-phenylacrylonitrile. 相似文献
In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (Td10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity. 相似文献
Semihydrogenation of alkynes to alkenes is an important and fundamental reaction in many industrial and synthetic applications and often suffers low selectivity because of the overhydrogenation. Here, highly selective semihydrogenation of alkynes is achieved by using H2 ex situ generated from formic acid dehydrogenation with palladium (Pd)-based bimetallic catalysts through a two-chamber reactor in this work, realizing efficient utilization of H2 and selective production of alkenes under mild reaction conditions. The Pd-based bimetallic catalysts show excellent catalytic performances for semihydrogenation of alkynes (PdZn bimetallic catalyst) and dehydrogenation of formic acid (PdAg bimetallic catalyst) in the two-chamber reactor. 相似文献
Acetaminophen is a well-known drug commonly used to provide pain relief, but it can also lead to acute liver failure at high concentrations. Therefore, there is considerable interest in monitoring its concentrations. Sensitive and selective acetaminophen electrochemical sensors were designed by cycling a glassy carbon electrode (GCE) to high potentials in the presence of β-CD in a phosphate electrolyte, or by simply activating the GCE electrode in the phosphate solution. Using cyclic voltammetry, adsorption-like voltammograms were recorded. The acetaminophen oxidation product, N-acetyl benzoquinone imine, was protected from hydrolysis, and this was attributed to the adsorption of acetaminophen at the modified GCE. The rate constants for the oxidation of acetaminophen were estimated as 4.3 × 10–3 cm2 s–1 and 3.4 × 10–3 cm2 s–1 for the β-CD-modified and -activated electrodes, respectively. Using differential pulse voltammetry, the limit of detection was calculated as 9.7 × 10–8 M with a linear concentration range extending from 0.1 to 80 μM. Furthermore, good selectivity was achieved in the presence of caffeine, ascorbic acid and aspirin, enabling the determination of acetaminophen in a commercial tablet. Similar electrochemical data were obtained for both the β-CD-modified and activated GCE surfaces, suggesting that the enhanced detection of acetaminophen is connected mainly to the activation and oxidation of the GCE. Using SEM, EDX and FTIR, no evidence was obtained to indicate that the β-CD was electropolymerised at the GCE.