Nutritional Attributes and Phenolic Composition of Flower and Bud of Sophora japonica L. and Robinia pseudoacacia L.

Sophora japonica L. (SJL) and Robinia pseudoacacia L. (RPL) are widely cultivated in China. However, the utilization of their main by-products are limited due to a lack of comprehensive nutritional attributes. Herein, the proximate composition, mineral elements, fatty acids, amino acids, monosaccharides, and phenolics were analyzed to investigate the nutritional attributes of SJL and RPL. Dietary fiber was the main ingredient in SJL and RPL, followed by protein and lipids. The content of Fe in SJL and RPL was highest, especially in flowers of SJL, reaching about 1179.51 mg/kg. The total unsaturated fatty acids accounted for 89.67% of the bud of SJL. Meanwhile, the essential amino acids contents of the flower and bud of SJL and RPL accounted for 35.95–40.59% of total amino acids. The flower of SJL (373.75 mg/g) exhibited the most abundant monosaccharides. Meanwhile, the total phenolics and flavonoid contents in the buds of SJL and RPL were significantly higher than that of the flower, implying the buds possessed better biological activity. Moreover, the bud of SJL possessed the most abundant phenolics. The results provided a reference for the development of functional food derived from SJL and RPL.     

Thermal,Mechanical and Dielectric Properties of Polyimide Composite Films by In-Situ Reduction of Fluorinated Graphene

Materials with outstanding mechanical properties and excellent dielectric properties are increasingly favored in the microelectronics industry. The application of polyimide (PI) in the field of microelectronics is limited because of the fact that PI with excellent mechanical properties does not have special features in the dielectric properties. In this work, PI composite films with high dielectric properties and excellent mechanical properties are fabricated by in-situ reduction of fluorinated graphene (FG) in polyamide acid (PAA) composites. The dielectric permittivity of pure PI is 3.47 and the maximum energy storage density is 0.664 J/cm³ at 100 Hz, while the dielectric permittivity of the PI composite films reaches 235.74 under the same conditions, a 68-times increase compared to the pure PI, and the maximum energy storage density is 5.651, a 9-times increase compared to the pure PI films. This method not only solves the problem of the aggregation of the filler particles in the PI matrix and maintains the intrinsic excellent mechanical properties of the PI, but also significantly improves the dielectric properties of the PI.     

聚龙一号装置上首次铝套筒Z箍缩X射线背光照相实验

在聚龙一号脉冲功率装置上首次完成了对带正弦扰动铝套筒Z箍缩的X射线背光照相实验。实验采用千焦耳激光器（1053 nm, 1 kJ, 1 ns）驱动固体靶材产生X射线, 然后利用基于球面晶体的单色背光照相技术以及直接点投影背光照相技术, 成功观测到约7.5 MA电流驱动条件下, Z箍缩铝套筒的外边界不稳定性发展情况。该实验验证了在聚龙一号装置上联合千焦耳激光器开展X射线背光照相实验的能力, 为后续精密Z箍缩物理研究奠定了基础。     

聚焦光在亚表面损伤介质中的散射特性

针对光学元件的亚表面缺陷,结合基于激光共焦层析的亚表层检测方法,建立聚焦光束在亚表面损伤介质中的传输模型,并采用有限元分析方法,仿真研究K9玻璃光学元件亚表层缺陷对聚焦光束的散射调制特性,特别对颗粒状和微裂纹两类特殊缺陷的光学调制特性进行研究和分析,探索了波长、缺陷大小、缺陷折射率及缺陷方向对聚焦光束散射特性的影响规律,通过分析包含亚表面损伤缺陷信息的光场分布图和强度变化曲线,获得了亚表面损伤缺陷的信息,并对其进行评价。     

基于节点密度的自适应EFG法拓扑优化方法研究

针对无网格法拓扑优化中设计变量庞大、计算效率低的问题,提出了基于节点密度的自适应EFG拓扑优化方法.该方法以节点相对密度为设计变量,建立了以结构柔度最小为优化目标的自适应EFG拓扑优化模型,给出了拓扑优化中自适应节点加密准则、节点加密方法和新增节点设计变量更新规则.算例结果表明,采用论文提出的自适应EFG拓扑优化方法进行结构拓扑优化时,可以减少结构分析和优化的设计变量数目,提高优化效率.     

基于CARR模型的交易量与股价波动性动态关系的研究

股市交易量与股价变化的关系就一直是学术界与实务界所共同关心的主题。基于Chou(2005)提出的CARR模型对两者的动态关系问题进行了研究。首先分析了作为量价关系理论基础的混合分布假说理论在CARR模型中的适川性,进而基于混合分布假说理论对我国上证综合指数、深证成份指数以及随机抽取的十只个股进行了量价关系的实证检验。研究发现:混合分布假说理论同样适用于CARR模型,这证实了股价波动性的CARR效应的存在。实证的结果也证实了CARR模型无论是对于股票指数还是单只股票交易量都具有了良好的解释作用。因此,CARR模型与GARCH模型相比,在交易量与股价波动关系动态关系的研究领域可以得到更为稳健的结果。     

A guide to use fluorinated aromatic bulky cations for stable and high-performance 2D/3D perovskite solar cells: The more fluorination the better?

While serious stability issues impede the commercialization of perovskite solar cells(PSCs),twodimensional(2 D) perovskites based on fluorinated bulky cations have emerged as more intrinsically stable materials.However,the influence of fluorination degree of the bulky aromatic cation on the performance of resulting PSCs has not been scrutinized.Here,2 D perovskites(FxPEA)2 PbI₄(x=1,2,3,5) are grown in situ on the surface of the three-dimensional(3 D) perovskite and demonstrate effecti...     

Spectrally distinct near-infrared probes for multiplexed biomedical imaging

Our bodies contain a huge amount of anatomical,physiolo-gical,cellular or molecular information.The understanding of how these pieces of information are organiz...     

Research Progress of Lithium Plating on Graphite Anode in Lithium‐Ion Batteries

Lithium plating on graphite anode is triggered by harsh conditions of fast charge and low temperature, which significantly accelerates SOH (state of health) degradation and may cause safety issues of lithium ion batteries (LIBs). This paper has reviewed recent research progress of lithium plating on graphite anode. Firstly, we summarize the forming mechanisms of Li plating with corresponding influence factors, the detecting methods and hazard of Li plating. Then, approaches to suppress Li plating are discussed, including anode surface modification, electrolyte composition optimization and development of optimal charge strategies. Finally, we conclude and propose the remaining challenges and prospects in terms of mechanism research, detecting approaches, and suppressing methods of Li plating. This review highlights the development of Li plating research and plays a guiding rule of further study on Li plating in LIBs.