Determination of aflatoxins in food products by chromatography.

Several chromatographic methods for the determination of aflatoxins in agricultural and food products are reviewed. During the past two decades, identification and determination of aflatoxins were done by thin-layer chromatography (TLC) because it was easy, fast and inexpensive. However, high-performance liquid chromatography (HPLC) using fluorescence detection is now the method of choice for determining aflatoxins and is also growing in popularity for their identification. The reasons for selecting HPLC over TLC can be summarized as the ability to analyze for a wide variety of compounds, including compounds that are easily degraded by heat, light or air, the ease of adaptation to confirmatory procedures, the potential for automation and the dramatic improvement in instrumentation, including the development of increasingly sensitive fluorescence and electrochemical detectors and short, high-resolution, reversed-phase columns.     

Adsorption on film-free and antibody-coated piezoelectric sensors

Frequency responses associated with adsorption of gas-phase toluene, o-nitrotoluene, valproic acid and the pesticides parathion, malathion and disulfoton on uncoated and protein-coated piezoelectric sensors are reported. Valproic acid antiserum and antibody against parathion were included among the set of protein films studied. Responses, which were reversible in all cases, are attributed to chemisorption or physisorption on electrode and protein surfaces. Under the conditions used, no signals corresponding to selective immunochemical binding were found. Highly sensitive responses of protein-coated sensors to the pesticide species were confirmed, with the lower limit of detection being about 0.01 μg l^?1 in nitrogen carrier gas.     

Fourier-transform Raman spectroscopic study of a Neolithic waterlogged wood assemblage

The use of Fourier-transform Raman spectroscopy for characterising lignocellulosics has increased significantly over the last twenty years. Here, an FT-Raman spectroscopic study of changes in the chemistry of waterlogged archaeological wood of Pinus sp. and Quercus sp. from a prehistoric assemblage recovered from northern Greece is presented. FT-Raman spectral features of biodeteriorated wood were associated with the depletion of lignin and/or carbohydrate polymers at various stages of deterioration. Spectra from the archaeological wood are presented alongside spectra of sound wood of the same taxa. A comparison of the relative changes in intensities of spectral bands associated with lignin and carbohydrates resulting from decay clearly indicated extensive deterioration of both the softwood and hardwood samples and the carbohydrates appear to be more deteriorated than the lignin. The biodeterioration of the archaeological timbers followed a pattern of initial preferential loss of carbohydrates causing significant loss of cellulose and hemicellulose, followed by the degradation of lignin.     

Chloride‐Anion‐Templated Synthesis of a Strapped‐Porphyrin‐Containing Catenane Host System

The synthesis, structure and anion‐recognition properties of a new strapped‐porphyrin‐containing [2]catenane anion host system are described. The assembly of the catenane is directed by discrete chloride anion templation acting in synergy with secondary aromatic donor–acceptor and coordinative pyridine–zinc interactions. The [2]catenane incorporates a three‐dimensional, hydrogen‐bond‐donating anion‐binding pocket; solid‐state structural analysis of the catenane?chloride complex reveals that the chloride anion is encapsulated within the catenane’s interlocked binding cavity through six convergent CH????Cl and NH???Cl hydrogen‐bonding interactions and solution‐phase ¹H NMR titration experiments demonstrate that this complementary hydrogen‐bonding arrangement facilitates the selective recognition of chloride over larger halide anions in DMSO solution.     

Linear 6,6'-biazulenyl framework featuring isocyanide termini: synthesis, structure, redox behavior, complexation, and self-assembly on Au(111)

The key step in accessing the title species (5), the first nonbenzenoid diisocyanobiaryl, involved an unexpected homocoupling of a 6-bromoazulene derivative. The reversible 2e(-) reduction of 5 was addressed electrochemically and computationally. The shifts in energies of the S(0)→S(1) and S(0)→S(2) transitions for a series of related 6,6'-biazulenyl derivatives correlate with the e(-)-donating/-withdrawing strength of their 2,2'-substituents but follow opposite trends. Species 5 adsorbs end-on (η(1)) to the Au(111) surface via one of its -NC groups to form a 2-nm-thick film. In addition, bimetallic coordination of 5's -NC termini can be readily achieved.     

Polyamine-functional sterically stabilized latexes for covalently cross-linkable colloidosomes

Sterically stabilized polystyrene latexes were prepared by aqueous emulsion polymerization using a poly(ethylene imine) (PEI) stabilizer in the presence of 4-vinylbenzyl chloride (4-VBC; 1.0 wt % based on styrene). Partial quaternization of the amine groups on the PEI chains by 4-VBC occurs in situ, hence producing a chemically grafted steric stabilizer. Such 4-VBC-modified PEI chains were grafted more efficiently onto the polystyrene particles than unmodified PEI, as judged by aqueous electrophoresis, XPS, and nitrogen microanalysis. Moreover, partially quaternized PEI gave significantly smaller polystyrene particles than those synthesized in the absence of any PEI stabilizer or those synthesized using unmodified PEI. The partially quaternized PEI-stabilized polystyrene latex proved to be an effective emulsifier at pH 9, forming stable oil-in-water Pickering emulsions when homogenized (12,000 rpm, 2 min, 20 °C) with four model oils, namely, n-dodecane, methyl myristate, isononyl isononanoate, and sunflower oil. The primary and/or secondary amine groups on the PEI stabilizer chains were successfully cross-linked using three commercially available polymeric reagents, namely, tolylene 2,4-diisocyanate-terminated poly(propylene glycol) (PPG-TDI), poly(propylene glycol) diglycidyl ether (PPG-DGE), or poly(ethylene glycol) diglycidyl ether (PEG-DGE). Cross-linking with the former reagent led to robust colloidosomes that survived the removal of the internal oil phase on washing with excess alcohol, as judged by optical microscopy and SEM. PPG-TDI reacted very rapidly with the PEI stabilizer chains, with cross-linking being achieved during homogenization. Well-defined colloidosomes could be formed only by using sunflower oil and isononyl isononanoate with this cross-linker at 20 °C. However, cooling to 0 °C allowed colloidosomes to be formed using n-dodecane, presumably because of the slower rate of cross-linking at this reduced temperature. PPG-DGE proved to be a more generic cross-linker because it formed robust colloidosomes with all four model oils. However, cross-linking was much slower than that achieved using PPG-TDI, with intact colloidosomes being formed only after ～12 h at 20 °C. The PEG-DGE cross-linker allowed cross-linking to be conducted at 20 °C from the aqueous phase (rather from within the oil droplets for the oil-soluble PPG-TDI or PPG-DGE cross-linkers). In this case, well-defined colloidosomes were obtained at 50 vol % with surprisingly little intercolloidosome aggregation, as judged by laser diffraction studies.     

CGC using a programmable electronic pressure controller

Capillary gas chromatographic separations were performed with an electronic pressure control system developed to provide precise closed-loop control of inlet pressure through the use of a solid state micro-machined pressure sensor and electronically controlled proportional valve. The closed-loop control of the electronic system provided better precision than the open-loop control achieved by manual pressure regulation. Closed-loop control can perform pressure programming, which can be combined with temperature programming to optimize separations. The pressure sensor monitors the integrity of the flow system and singals the controller to reduce flow in the presence of a sudden loss of system pressure.