An AFM, XPS and electrochemical study of molecular electroactive monolayers formed by wet chemistry functionalization of H-terminated Si(1 0 0) with vinylferrocene

Molecular electroactive monolayers have been produced from vinylferrocene (VFC) via light-assisted surface anchoring to H-terminated n- and p-Si(1 0 0) wafers prepared via wet chemistry, in a controlled atmosphere. The resulting Si-C bound hybrids have been characterized by means of XPS and AFM. Their performance as semiconductor functionalized electrodes and their surface composition have been followed by combining electrochemical and XPS measurements on the same samples, before and after use in an electrochemical cell. White-light photoactivated anchoring at short (1 h) exposure times has resulted in a mild route, with a very limited impact on the initial quality of the silicon substrate. In fact, the functionalized Si surface results negligibly oxidized, and the C/Fe atomic ratio is close to the value expected for the pure molecular species. The VFC/Si hybrids can be described as (η⁵-C₅H₅)Fe²⁺(η⁵-C₅H₄)-CH₂-CH₂-Si species, on the basis of XPS results. Electrochemical methods have been applied in order to investigate the role played by a robust, covalent Si-C anchoring mode towards substrate-molecule electronic communication, a crucial issue for a perspective development of molecular electronics devices. The response found from cyclic voltammograms for p-Si(1 0 0) functionalized electrodes, run in the dark and under illumination, has shown that the electron transfer is not limited by the number of charge carriers, confirming the occurrence of electron transfer via the Si valence band. The hybrids have shown a noticeable electrochemical stability and reversibility under cyclic voltammetry (cv), and the trend in peak current intensity vs. the scan rate was linear. The molecule-Si bond is preserved even after thousands of voltammetric cycles, although the surface coverage, evaluated from cv and XPS, decreases in the same sequence. An increasingly larger surface concentration of Fe³⁺ at the expenses of Fe²⁺ redox centers has been found at increasing number of cv’s, experimentally associated with the growth of silicon oxide. Surface SiO⁻ groups from deprotonated silanol termination, induced by the electrochemical treatments, are proposed as the associated counterions for the Fe³⁺ species. They could be responsible for the observed decrease in the electron transfer rate constant with electrode ageing.     

Host–guest inter­action in a thio­urea–dimethyl oxalate (2/1) complex at 300 and 100 K

The title complex, 2CH₄N₂S·C₄H₆O₄, is a host–guest system. The asymmetric unit consists of one complete thio­urea mol­ecule and one‐half of a dimethyl oxalate mol­ecule lying on an inversion centre. The host thio­urea mol­ecules are connected to form zigzag chains by N—H⋯S hydrogen bonds. The guest dimethyl oxalate mol­ecules provide O‐atom acceptors for N—H⋯O hydrogen bonds, thus inter­connecting the chains of thio­urea mol­ecules to form completely connected sheets. The reduction in temperature from 300 to 100 K leaves the structure unchanged and still isostructural with that previously determined for the analogous thio­urea–diethyl oxalate (2/1) complex. It does, however, induce closer packing of the mol­ecules, general shrinkage of the unit cell and shortening of the hydrogen bonds, these last two to the extent of 1–2%.     

53rd Meeting of the International Society of Electrochemistry

Russian Journal of Electrochemistry -     

Extensions of Modules over Schur Algebras, Symmetric Groups and Hecke Algebras

We study the relation between the cohomology of general linear and symmetric groups and their respective quantizations, using Schur algebras and standard homological techniques to build appropriate spectral sequences. As our methods fit inside a much more general context within the theory of finite-dimensional algebras, we develop our results first in that general setting, and then specialize to the above situations. From this we obtain new proofs of several known results in modular representation theory of symmetric groups. Moreover, we reduce certain questions about computing extensions for symmetric groups and Hecke algebras to questions about extensions for general linear groups and their quantizations.     

Measurement of apex angle of the prism using total internal reflection

Total internal reflection technique is examined critically for the measurement of apex angle of the prism. Recognition of the critical boundary completely specifies the apex angle ‘A’ of the prism by keeping constant the ratio of refractive index of sample fluid (n₁=1.4) to that of glass (n₂=1.7). Recording of observations in the laboratory is dependent upon whether the apex angle ‘A’ of prism is greater than or less than or equal to critical angle ‘r_c’. The minimum value of error function ‘χ’ in the proximity of Abbe angle explain the choice of Abbe type instruments and shown invariant by relating positive ‘₊’ and the negative angle of emergence ‘₋’. Using ray-tracing technique, an expression for the length of the critical boundary ‘l’ is derived and is shown as a measure of the apex angle ‘A’ of the prism.

The choice of the realistic grazing condition leads us to two turning points for which error function ‘χ’ is minimal and yields appropriate option of the measurement of apex angle ‘A’ of the prism. It is further shown that the small error ‘ζ’ crept in the apex angle ‘A’ of the prism can lead to a significant error in the design of Pulfrich type instruments.

Experimental measurements are in-line with the predictions made.     

Influence of seeded impurities on the fusion reactor operation

In order to study the influence of seeded impurities on ITER like reactor operation the COREDIV code has been extended to include the transport of several sputtered and/or injected impurities. In the COREDIV code the core plasma is treated in the frame of 1D radial transport model whereas in the edge the 2D multifluid code EPIT is used. The EPIT code solves in the slab geometry the MHD equations for densities and velocities for all ions species as well as for electron and ion temperatures. The iteration scheme in the code leads to steady state solution of coupled core and SOL system. The numerical results for Carbon and Nickel plate and seeded impurities Silicon and Neon are presented.     

Index Heuristics for Multiclass M/G/1 Systems with Nonpreemptive Service and Convex Holding Costs

We consider the optimal service control of a multiclass M/G/1 queueing system in which customers are served nonpreemptively and the system cost rate is additive across classes and increasing convex in the numbers present in each class. Following Whittle's approach to a class of restless bandit problems, we develop a Langrangian relaxation of the service control problem which serves to motivate the development of a class of index heuristics. The index for a particular customer class is characterised as a fair charge for service of that class. The paper develops these indices and reports an extensive numerical investigation which exhibits strong performance of the index heuristics for both discounted and average costs.     

A novel approach to the acoustic characterisation of porous road surfaces

Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.     

FT-IR study on solvent effects in building blocks of bioactive compounds. V

3-Hydroxy-4-hydroxymethyl pyrrolidin-2-ones, easily prepared from the Baylis–Hillman adduct 1-ethyl-4-methyl-2-hydroxy-3-methylenebutanedioate, are useful intermediates in the synthesis of bioactive compounds. In order to understand the mechanism involved in this reaction, vibrational and Montecarlo molecular mechanics conformational analysis on 1-ethyl-4-methyl-2-hydroxy-3-methylenebutanedioate were carried out, confirming the existence of a low energy intramolecular H-bonded five-member ring.     

Form I of desloratadine,a tricyclic anti­histamine

The title compound [systematic name: 8‐chloro‐11‐(piperidin‐4‐yl­idene)‐6,11‐dihydro‐5H‐benzo[4,5]cyclo­hepta­[2,1‐b]pyridine], C₁₉H₁₉ClN₂, was crystallized from ethyl acetate. The inter­esting feature of the reported structure is that it does not contain any strong hydrogen bonds, although the mol­ecule contains a secondary NH group, which is a good hydrogen‐bond donor.