Investigation on compositional effect of PEG:BaTiO<Subscript>3</Subscript> in plasticized PVC–LiBETi polymer composite electrolytes

The blend-based polymer electrolyte comprising poly(vinyl chloride) (PVC) and poly(ethylene glycol) (PEG) as host polymer and lithium bis(perfluoroethanesulfonyl)imide as complexing salt have been prepared. Ethylene carbonate and dimethyl carbonate (50:50 v/v) are used as plasticizer for the system. The barium titanate is used as a filler, and the ratio of (PEG:BaTiO₃) is varied to study its effect on the conductivity behavior of the electrolyte. XRD and ac impedance studies are carried out on the prepared samples. The ac impedance measurements show that the conductivity of the prepared samples depends on the (PEG:BaTiO₃) ratio, and its value is higher for (15:5) wt.% of (PEG:BaTiO₃)-incorporated film. The temperature dependence of the conductivity of the polymer films obeys VTF relation. The role of ferroelectric filler in enhancing the conductivity is studied. The thermal stability of the film is ascertained from TG/DTA studies. The phase morphological study reveals that the porous nature of the polymer electrolyte membranes depends on the (PEG:BaTiO₃) ratio.     

Enhancing the interfacial strength of glass/epoxy composites using ZnO nanowires

This paper investigated the application of ZnO nanowires (ZnO NW) to enhance the interfacial strength of glass/epoxy composites. ZnO NW were grown on glass fibers by hydrothermal method, tensile properties of bare and ZnO NW coated fibers were measured by single fiber tensile testing, wettability of fiber with resin was studied by contact angle measurements and finally the interfacial strength and mechanisms were determined by single fiber fragmentation testing of glass/epoxy composites. The surface coverage of ZnO NW on glass fibers was fairly uniform without formation of major clusters. The coating of ZnO NW slightly reduced the tensile strength and improved the tensile modulus of fibers. Wettability tests showed reduction in contact angles for ZnO NW coated fibers because of enhanced wetting and infiltration of epoxy resin into nanowires. In fragmentation testing of microcomposites, smaller and concentrated interfacial debonding zones for ZnO NW coated fibers indicated good stress transfer and strong interfacial adhesion. A new form of crossed and closely spaced stress patterns were observed for nanowires of high aspect ratios. The interfacial strength of ZnO NW coated fibers increased by at least 109% and by 430% on average, which was attributed to the increased surface area and mechanical interlocking provided by ZnO NW.     

Optical phase-conjugation in erioglaucine dye-doped thin film

Optical phase-conjugation (OPC) has been demonstrated in erioglaucine (acid blue 9) dye-doped gelatin films via continuous-wave degenerate four-wave mixing (DFWM) using a low-power He-Ne laser at 633 nm. DFWM and holographic processes are found to contribute to the observed phase-conjugate signal. A maximum phase-conjugate beam reflectivity of about 0.24% has been observed in these dye-doped gelatin films.     

Synchronization of memristor‐based delayed BAM neural networks with fractional‐order derivatives

This article deals with the problem of synchronization of fractional‐order memristor‐based BAM neural networks (FMBNNs) with time‐delay. We investigate the sufficient conditions for adaptive synchronization of FMBNNs with fractional‐order 0 < α < 1. The analysis is based on suitable Lyapunov functional, differential inclusions theory, and master‐slave synchronization setup. We extend the analysis to provide some useful criteria to ensure the finite‐time synchronization of FMBNNs with fractional‐order 1 < α < 2, using Mittag‐Leffler functions, Laplace transform, and linear feedback control techniques. Numerical simulations with two numerical examples are given to validate our theoretical results. Presence of time‐delay and fractional‐order in the model shows interesting dynamics. © 2016 Wiley Periodicals, Inc. Complexity 21: 412–426, 2016     

Lithium ion transport in PVC/PEG 2000 blend polymer electrolytes complexed with LiX (X=ClO 4? , BF 4? , and CF3SO 3? )

This paper describes preparation and characterization of polyvinyl chloride and polyethylene glycol 2000 blend polymer electrolytes with LiX (X=ClO₄⁻, BF₄⁻, and CF₃SO₃⁻) salt by solution casting technique. Ethylene carbonate and propylene carbonate mixture was used as the plasticizers. LiClO₄-based electrolytes exhibited better ionic conduction behavior than other salts. The thermal profiles ascertain the stability of the membranes up to 120°C by differential scanning calorimetry. Complexation and crystallinity were studied through X-ray diffraction measurements. Phase morphological study reveals the porous nature of the polymer electrolyte membranes.     

Variation in the biomolecular interactions of nickel(II) hydrazone complexes upon tuning the hydrazide fragment

Three new bivalent nickel hydrazone complexes have been synthesised from the reactions of [NiCl(2)(PPh(3))(2)] with H(2)L {L = dianion of the hydrazones derived from the condensation of o-hydroxynaphthaldehyde with furoic acid hydrazide (H(2)L(1)) (1)/thiophene-2-acid hydrazide (H(2)L(2)) (2)/isonicotinic acid hydrazide (H(2)L(3)) (3)} and formulated as [Ni(L(1))(PPh(3))] (4), [Ni(L(2))(PPh(3))] (5) and [Ni(L(3))(PPh(3))] (6). Structural characterization of these compounds 4-6 were accomplished by using various physico-chemical techniques. Single crystal X-ray diffraction data of complexes 4 and 5 proved their distorted square planar geometry. In order to ascertain the potential of the above synthesised compounds towards biomolecular interactions, additional experiments involving interaction with calf thymus DNA (CT DNA) and bovine serum albumin (BSA) were carried out. All the ligands and corresponding nickel(ii) chelates have been screened for their scavenging effect towards O(2)(-), OH and NO radicals. The efficiency of complexes 4-6 to arrest the growth of HeLa, HepG-2 and A431 tumour cell lines has been studied along with the cell viability test against the non-cancerous NIH 3T3 cells under in vitro conditions.     

Characterisation of glycoprotein ligands synthesised using solid-phase combinatorial chemistry

A combination of rational design based on mimicking natural protein-carbohydrate interactions and solid-phase combinatorial chemistry has led to the identification of an affinity ligand which displays selectivity for the mannose moiety of glycoproteins. The ligand was initially identified as 32/18, a triazine scaffold substituted with 2-acetylpyrrole (32) and 5-aminoindan (18). However, characterisation of the immobilised ligand by release from the matrix via a cleavable linker, (4s,5s)-4,5-di(aminomethyl)-2,2-dimethyldioxolane, and using a non-destructive on-resin method, 13C NMR spectroscopy, confirmed that the putative ligand 32/18 was, in fact, 18/18, the disubstituted 5-aminoindan. 1H NMR studies on the interaction of alpha-D-methylmannoside with the ligand 18/18 in solution confirm the involvement of the hydroxyl group in the C-2 position.     

Photophysics of TICT states of 7-diethylamino-4-methyl coumarin dye by energy transfer techniques

Coumarin 1 exhibited dual amplified spontaneous emission (ASE) in certain solvents under nitrogen laser excitation. These emissions are known as normal and anomalous emissions. The anomalous emission corresponds to TICT state and it does not have a corresponding fluorescence peak. Energy transfer techniques have been used to study the photophysics of TICT states and the characteristics of dual ASE bands of the dye coumarin 1.     

Robust reliable dissipative control of nonlinear networked control systems

This article focuses on the robust reliable dissipative control issue for a class of switched discrete‐time nonlinear networked control systems with external energy bounded disturbances. In particular, nonlinearities are modeled in a probabilistic way according to Bernoulli distributed white sequence with known conditional probability. A Lyapunov–Krasovskii functional is proposed based on which sufficient conditions for the existence of the reliable dissipative controller are derived in terms of linear matrix inequalities (LMIs) which ensures exponentially stability as well as dissipative performance of the resulting closed‐loop system. The explicit expression of the desired controller gains can be obtained by solving the established LMIs. Finally, a numerical example is presented to demonstrate the effectiveness and applicability of the proposed design strategy. © 2016 Wiley Periodicals, Inc. Complexity 21: 427–437, 2016     

Role of electrostatic interactions for the domain shapes of Langmuir monolayers of monoglycerol amphiphiles

The role of electrostatic interaction in the domain morphology of amide, ether, ester, and amine monoglycerol monolayers (abbreviated as ADD, ETD, ESD, and AMD, respectively) with systematic variation in the molecular structure of the headgroup region is investigated. Experimental studies using Brewster angle microscopy (BAM) and grazing incidence X-ray diffraction (GIXD) show that the characteristic features of the condensed monolayer phase, such as domain morphology, crystallinity, and lattice parameters, are very different for these monoglycerols. Therefore, the intermolecular interactions of the four amphiphilic monoglycerols are investigated in detail. First, the dipole moments of four monoglycerols of similar structure but with different functional groups are calculated by a semiempirical quantum mechanical technique. The dipole moments for monoglycerols follow the sequence AMD < ETD < ESD < ADD for the population of conformers of compounds investigated. The dipolar repulsion energies for the amphiphilic monoglycerols are also calculated for different possible mutual orientations between the dipoles. The calculated dipolar energies also follow the same trend for different possible headgroup orientations. These results can explain the domain shape of the monoglycerols observed experimentally. Second, ab initio calculations on the basis of the HF/6-31G** method are performed for representative monoglycerol headgroup segments. The results show that the intermolecular interaction energy related to dimer formation follows the order ETD < ESD < AMD < ADD segments, similar to that observed in experiment except in the case of the AMD segment. The relative importance of intra- and intermolecular hydrogen bonding in dimers is analyzed. The enhanced role of the intermolecular interaction relative to intramolecular interaction in the case of AMD contributes to the relatively high intermolecular interaction energy for the particular conformation of the dimer of AMD segment as observed from ab initio calculation. The present work shows that the variations in headgroup molecular structure alter drastically the domain shape, and the theoretical calculations conclusively reveal the important role of the electrostatic interactions for the mesoscopic domain architecture.