Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Hydrogels in aqueous phases of polyvinylalcohol (PVA), surfactants and clay minerals

Aqueous solutions of synthetic clay minerals have been studied in the presence of surfactants and water-soluble polyvinylalcohol (PVA). The PVAs (PVA 1, PVA 2) had a molecular weight of about 10⁵ Dalton and a degree of hydrolysis of 82%. The PVA-samples were surface active and lowered the surface tension to 43 mN/m. As a consequence of their amphiphilic nature the PVA molecules bind strongly to clay mineral particles. On saturation the clay mineral particles adsorb the fivefold weight of PVA of their own weight. It is concluded that the thickness of the adsorbed layers on both sides of the clay mineral is in the range of the hydrodynamic diameter of the PVA-coils in the bulk phase.When the clay mineral particles are not saturated with PVA, they act as cross-linking agents for the PVA. The whole systems are physically cross-linked and assume gel-like properties. Rheological measurements show that samples behave like soft matter with a yield stress value. All of them have a frequency independent storage modulus which is an order of magnitude larger than the loss modulus. The hydrogels become stronger as PVA concentration increases.Small amounts of cationic surfactants bind on the clay mineral. The interface of the clay mineral becomes more hydrophobic and the binding of the PVA on the clay mineral is strengthened. With rising concentration of the surfactant the surfactant molecules bind on PVA and the PVA becomes hydrophilic. As a consequence the PVA can no longer bind on the clay mineral and the gels transform to viscous and turbid solutions. Small amounts of cationic surfactants therefore stiffen the hydrogels while larger amounts cause phase separation and a solution with low viscosity. Anionic surfactants like SDS do not bind on the clay mineral, but strongly on the PVA. With increasing SDS concentration, the hydrogels become stiffer at first but thereafter they break and transform to viscous fluids.In PVA-solutions without the clay minerals both cationic and anionic surfactants bind to the PVAs in the aqueous solution. With increasing concentration of surfactant, the viscosities of the solutions pass over a maximum. In this respect the PVAs behave like hydrophobically modified water soluble polymers. The surfactants bind to the hydrophobic microdomain and thereby crosslink the polymer molecules. On saturation the polyvinyl alcohol with anionic surfactant become hydrophilic and the network character disappears to a certain extent.     

REDUCED PHOTOINACTIVATION OF 10-DODECYL ACRIDINE ORANGE-SENSITIZED YEAST CELLS AT HIGH FLUENCE RATES MEASUREMENTS AND COMPUTER SIMULATIONS

Abstract-During the development of a photodamage cell sorter several photosensitizers were tested for their ability to photoinactivate more than 90% of the sensitized cells after a brief irradiation with a fluence of 10 kJ/m². In pilot experiments, yeast cells sensitized with 10-dodecyl acridine orange (DAO) were effectively photoinactivated after receiving a fluence of 10 kJ/m² delivered in 8 s. However, when the same fluence was delivered in 3 μ s during passage through a focused laser beam in the cell sorter, all cells survived.
Computer simulations of the relevant photophysical and chemical reactions inside the irradiated cell were used to investigate the cause of this phenomenon. The results indicated that the absence of photoinactivation by DAO, after flash irradiations, was caused by the combined effects of (1) limited oxygen diffusion into the cell and (2) a reduced number of collisions between photosensitizer triplet and oxygen molecules during the irradiation due to saturation of the intracellular photosensitizer triplet concentration. The contributions of triplet-triplet annihilation and triplet quenching by ground state photosensitizer molecules were found to be minimal and not significant. These findings indicate that Type II photosensitizers are incapable of rapid selective photoinactivation in cell sorters.     

Alkylierung ambidenter Heterocyclen-Anionen, 1. Mitt.: Über die Benzylierung des 4-Hydroxy-carbostyrils

Zusammenfassung 4-Hydroxy-carbostyrile (1a–c) werden mit Benzylchlorid inDMF bevorzugt zu den 4-Benzyloxy-carbostyrilen (2a–c) alkyliert. In wäßr. NaOH dagegen erhält man aus1a und1c als Hauptprodukt das 3,3-Dibenzyl-2,4-dioxo-1,2,3,4-tetrahydrochinolin (3).

---

Alkylation of 4-hydroxy-quinol-2-ones (1a–c) with benzyl chloride inDMF in the presence of K₂CO₃ mainly gives the 4-benzylethers2a–c. However, carbon dialkylation takes place in aqueous NaOH and the main product of the reaction between benzylchloride and1a is 3.3-dibenzyl-2.4-dioxo-1.2.3.4-tetrahydro-quinoline3.

     

Evaluation of isothermal kinetic of sweetener

Summary Sulfonylureas are widely used for the treatment of non-insulin dependent diabetes mellitus. Glibenclamide belongs to the group of substituted arylsulfonylureas. Many representative of this group shows polymorphism. The purpose of this work was to investigate the thermal behaviour and compatibility between glibenclamide and some excipients using thermoanalytical techniques (TG-DTG/DSC). The thermal and isothermal kinetics data showed incompatibility between glibenclamide and magnesium stearate.     

Calcul théorique des énergies de divers arrangements géométriques de la molécule (η5-C5H5)2TiCl2

The molecular energy of the complex (η⁵-C₅H₅)₂TiCl₂ has been calculated for experimental geometry and for several hypothetical forms by a semi-empirical CNDO/2 approach. The energy difference between experimental (quasi-tetrahedral) geometry and a planar geometry is ca. 20 kcal mol^?1. This difference is sufficiently high to explain the difficulty of the inversion process.     

Determination of oxaliplatin in human plasma and plasma ultrafiltrate by graphite-furnace atomic-absorption spectrometry

A method for sensitive determination of the anti-cancer agent oxaliplatin in human plasma and human plasma ultrafiltrate (pUF) is presented. The method is based on the quantification of platinum by graphite-furnace atomic-absorption spectrometry, with Zeeman correction and an atomisation temperature of 2,700°C. Sample pretreatment involves dilution of the samples with a solution containing 0.15 mol L^–1 NaCl and 0.20 mol L^–1 HCl in water. Validation was performed in accordance with the most recent FDA guidelines for bioanalytical method validation. All results were within requirements. The validated ranges of quantification were 0.10–400 mol L^–1 for human pUF and 0.50–400 mol L^–1 for plasma. The assay is now successfully used to support pharmacokinetic studies of cancer patients treated with oxaliplatin.     

Zur reaktionsweise von triafulvenen mit azomethinyliden

The reaction of the azomethine ylides 2a–c with cyclopropenones 3 and of 2a with methylene cyclopropenes 7 leads via (3+3)-cycloaddition to pyridones-4 5 and 1,4 - dihydro - N - methyl - 4 - methylene - pyridines 8, respectively. The merocyanine systems 8 exhibit marked solvatochromic and thermochromic properties.     

Synthesen von Heterocyclen, 130. Mitt.: Über das Glomerin und das Arborin

Zusammenfassung Es werden einstufige Synthesen desGlomerins (2) [1,2-Dimethyl-4(1H)-chinazolinon] und desArborins (3) [1-Methyl-2-benzyl-4(1H)-chinazolinon] bekanntgegeben.

---

Syntheses of heterocycles, CXXX: Glomerine and arborine

A one step synthesis ofglomerine (2) [1.2-dimethyl-4(1H)-quinazolinone] andarborine (3) [1-methyl-2-benzyl-4(1H)-quinazolinone] is described.