Environment‐Sensitive Fluorescent Probe: A Benzophosphole Oxide with an Electron‐Donating Substituent

Electron‐donating aryl groups were attached to electron‐accepting benzophosphole skeletons. Among several derivatives thus prepared, one benzophosphole oxide was particularly interesting, as it retained high fluorescence quantum yields even in polar and protic solvents. This phosphole‐based compound exhibited a drastic color change of its fluorescence spectrum as a function of the solvent polarity, while the absorption spectra remained virtually unchanged. Capitalizing on these features, this phosphole‐based compound was used to stain adipocytes, in which the polarity of subcellular compartments could then be discriminated on the basis of the color change of the fluorescence emission.     

Majority‐Rules‐Type Helical Poly(quinoxaline‐2,3‐diyl)s as Highly Efficient Chirality‐Amplification Systems for Asymmetric Catalysis

A highly efficient majority‐rules effect of poly(quinoxaline‐2,3‐diyl)s (PQXs) bearing 2‐butoxymethyl chiral side chains at the 6‐ and 7‐positions was established and attributed to large ΔG_h values (0.22–0.41 kJ mol^?1), which are defined as the energy difference between P‐ and M‐helical conformations per chiral unit. A PQX copolymer prepared from a monomer derived from (R)‐2‐octanol (23 % ee) and a monomer bearing a PPh₂ group adopted a single‐handed helical structure (>99 %) and could be used as a highly enantioselective chiral ligand in palladium‐catalyzed asymmetric reactions (products formed with up to 94 % ee), in which the enantioselectivity could be switched by solvent‐dependent inversion of the helical PQX backbone.     

A Phosphole Oxide Based Fluorescent Dye with Exceptional Resistance to Photobleaching: A Practical Tool for Continuous Imaging in STED Microscopy

The development of stimulated emission depletion (STED) microscopy represented a major breakthrough in cellular and molecular biology. However, the intense laser beams required for both excitation and STED usually provoke rapid photobleaching of fluorescent molecular probes, which significantly limits the performance and practical utility of STED microscopy. We herein developed a photoresistant fluorescent dye C‐Naphox as a practical tool for STED imaging. With excitation using either a λ=405 or 488 nm laser in protic solvents, C‐Naphox exhibited an intense red/orange fluorescence (quantum yield Φ_F>0.7) with a large Stokes shift (circa 5900 cm^?1). Even after irradiation with a Xe lamp (300 W, λ_ex=460 nm, full width at half maximum (FWHM)=11 nm) for 12 hours, 99.5 % of C‐Naphox remained intact. The high photoresistance of C‐Naphox allowed repeated STED imaging of HeLa cells. Even after recording 50 STED images, 83 % of the initial fluorescence intensity persisted.     

X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary

We compare experimental measurements of inhomogeneous plastic deformation in a Ni bicrystal with crystal plasticity simulations. Polychromatic X-ray microdiffraction, orientation imaging microscopy and scanning electron microscopy, were used to characterize the geometrically necessary dislocation distribution of the bicrystal after uniaxial tensile deformation. Changes in the local crystallographic orientations within the sample reflect its plastic response during the tensile test. Elastic strain in both grains increases near the grain boundary. Finite element simulations were used to understand the influence of initial grain orientation and structural inhomogeneities on the geometrically necessary dislocations arrangement and distribution and to understand the underlying materials physics.     

Application of X-ray CT investigation of CO<Subscript>2</Subscript>–brine flow in porous media

A clear understanding of two-phase flows in porous media is important for investigating CO₂ geological storage. In this study, we conducted an experiment of CO₂/brine flow process in porous media under sequestration conditions using X-ray CT technique. The flow properties of relative permeability, porosity heterogeneity, and CO₂ saturation were observed in this experiment. The porous media was packed with glass beads having a diameter of 0.2 mm. The porosity distribution along the flow direction is heterogeneous owing to the diameter and shape of glass beads along the flow direction. There is a relationship between CO₂ saturation and porosity distribution, which changes with different flow rates and fractional flows. The heterogeneity of the porous media influences the distribution of CO₂; moreover, gravity, fractional flows, and flow rates influence CO₂ distribution and saturation. The relative permeability curve was constructed using the steady-state method. The results agreed well with the relative permeability curve simulated using pore-network model.     

Optimal control of drainage basin considering moving boundary

The purpose of this article is to present a technique to optimally control river flood using a drainage basin considering a moving boundary. The main theme of this article is to obtain outflow discharge from the drainage basin that maintains the water level at a downstream point and empties the drainage basin as soon as possible. The water flow phenomenon inside the drainage basin when a river flood occurs is considered. This phenomenon can be analysed by the finite element method considering a moving boundary. The optimal control theory can be implemented to obtain the optimal control discharge. The finite element analysis with a moving boundary is introduced in the optimal control theory. A new boundary condition on the downstream side of the river is proposed. This condition is formulated by the solitary wave condition based on the basic water level being capable of representing natural water surface. As a numerical study, optimal control of shallow water flow is carried out for the Tsurumi River and its drainage basin model.     

The Basin of Attraction of the Steady-States for a Chemotaxis Model in {\mathbb{R}^2} with Critical Mass

We consider the Cauchy problem for a parabolic–elliptic system in ${\mathbb{R}^2}$ , which is amathematical model of chemotaxis and also amodel of self-attracting particles. In the critical mass case, we determine the basin of attraction of the steady-states for the Cauchy problem through a Lyapunov functional.     

Synthesis of an indole analog of magallanesine via the [1,2]-meisenheimer rearrangement

Ring expansion of azetopyridoindole 11 via the [1,2]-Meisenheimer rearrangement of the corresponding N-oxide 12 gave azocinoindole 14 , which was converted into the N-benzoylenaminone 18 in 5 steps. Intramolecular cyclization of 18 was accomplished by a modified Heck reaction followed by reductive desulfonylation to provide the indole analog 2, 5H -isoindolo[2′,1′;1,2]azocino[5,6-b]indole, of magallanesine 1 .     

Properties of a Thin-Film Optical Waveguide Using Fluorinated Silicon Oxide and Organic Spin-on-Glass Films

A thin-film optical waveguide using a fluorinated silicon oxide (SiOF) as a core layer was investigated. An organic spin-on-glass (SOG) film was used for a cladding layer. The SiOF films were formed at 23°C by a liquid-phase deposition (LPD) technique using a supersaturated hydrofluosilicic acid (H₂SiF₆) aqueous solution. A thin-film optical waveguide structure for single mode was designed and fabricated, based on the dispersion properties of refractive indices for the LPD-SiOF and organic SOG films. The refractive indices at a wavelength of 632.8 nm were 1.430 and around 1.400 for the LPD-SiOF and organic SOG films, respectively. The thickness of LPD-SiOF films deposited was 1.18 μm. Thicknesses of cladding organic SOG films cured at 300 and 400°C were 1.28 and 1.31μm, respectively. The effective refractive indices for single mode were 1.4169 and 1.4158 at a wavelength of 632.8 nm for the cladding organic SOG films cured at 300 and 400°C, respectively, and differences between the measured and calculated incident angles were 0.84° and 1.29° for the cladding organic SOG films cured at these respective temperatures. A streak of guided-light was observed for the LPD-SiOF/SOG structure optical waveguide. The transmission loss was 7.6-7.9 dB/cm.     

Simple Preparation of Sulfate Anion‐Doped Polyaniline‐Clay Nanocomposites by an Environmentally Friendly Mechanochemical Synthesis Route

Summary: Conducting polyaniline (PANI) and montmorillonite (MMT) nanocomposites were prepared from aniline sulfate and MMT by a mechanochemical synthesis route. X‐Ray diffraction analysis confirmed that, by controlling the aniline sulfate content, mechanochemical synthesis led to two types of different formations. After polymerization, the mechanochemical route synthesized much more PANI between the clay layers compared to a solution method. The electrical conductivities of the synthesized PANI‐MMT nanocomposites in pressed pellets ranged in the order of between 10⁻⁴ and 10⁻³ S · cm⁻¹.

X‐ray powder diffraction patterns of the intercalation products prepared by grinding montmorillonite with various amounts of Ani‐SO₄ in a mortar.