Photoinduced face-inversion of conjugated tetraene ligands on a Pd-Pd-Pd moiety

The linear sandwich tripalladium complexes [Pd3{Ar(CH=CH)4Ar}2[BArf]2 (Ar = Ph, p-t-Bu-C6H4, p-styryl-C6H4) undergo photoinduced isomerization involving face-inversion of the tetraene ligands. Irradiation of these complexes with visible light (>510 nm) resulted in rac (staggered sandwich) to meso (eclipsed sandwich) isomerization. The structures of rac and meso isomers are determined by X-ray crystallographic analyses.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

The hydrophilization of polystyrene substrates by 172-nm vacuum ultraviolet light

This paper describes the photochemical surface modification of polystyrene (PS) substrates using vacuum ultraviolet (VUV) light 172 nm in wavelength. We have particularly focused on the effects of atmospheric pressure during VUV irradiation on the obtained surface's wettability and the stability of the wettability, in addition to its chemical structure, morphology, and photooxidation rate. Samples were photoirradiated with VUV light under pressures of 10, 10(3), or 10(5) Pa. Although, in each case, the originally hydrophobic PS surface became highly hydrophilic, the final water-contact angle and photooxidation rate depended on the atmospheric pressure. The samples treated at 10 Pa were less wettable than those prepared at 10(3) and 10(5) Pa due to the shortage of oxygen molecules in the atmosphere. The minimum water-contact angles of the samples treated at 10, 10(3), and 10(5) Pa were about 8 degrees, 0 degrees, and 0 degrees, respectively. With the samples prepared at 10 and 10(3) Pa, photooxidation reactions proceeded in the topmost region closest to the surface, while at 10(5) Pa photooxidation was found to be greatly enhanced in the deeper regions, as evidenced by angle-resolved X-ray photoelectron spectroscopy. Photoetching rates were determined through atomic force microscope observation of microstructured PS samples prepared by a simple mesh-contact method. As estimated from AFM images of the latticed microstructures obtained, the rates of samples prepared at 10(3) and 10(5) Pa were about 1.5 and 1.3 nm/min, respectively. However, no photoetched features were observable on the sample surface prepared at 10 Pa. Hydrophilic stability also varied greatly depending on atmospheric pressure. The hydrophilicity of samples treated at 10 and 10(3) Pa gradually decreased as they were exposed to air. On the other hand, the sample surface prepared at 10(5) Pa showed excellent hydrophilicity even after being left in air for 30 days.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Studien Über die Saponine aus der Arznei-Ginseng-Wurzel: Massenspektren von Ginsenoside-Rg1-Decaacetat und Verwandten Verbindungen

Mass spectra of ginsenoside-Rg1 deca-acetate

1 Siehe Lit.2.

and the related dammaran-type triterpene saponin acetates have been studied and a comment is given on the structure of panaxoside A (=ginsenoside-Rg1) proposed by Elyakov, et al .     

Studies on novel cyclodextrans: Inclusion of C60 and C70

Cycloisomalto-heptaose (CI-7) and cycloisomalto-octaose (CI-8) are two novel cyclodextrans. Treatment with C₆₀ or C₇₀ by kneading leads to the formation of four distinct water-soluble inclusion complexes: CI-7/C₆₀ (2: 1), CI-8/C₆₀ (2: 1), CI-7/C₇₀ (2: 1) and CI-8/C₇₀ (2: 1). Their formation and structures have been examined by UV vis spectroscopy, X-ray powder diffraction and fluorescence spectral studies. The reaction is a reversible process.     

Deuterium substitution effect on proton relaxation times as a direct means for elucidating molecular interaction in solution. An application to 2′,3′-isopropylideneadenosine

Proton T₁ measurement with the Fourier transform method combined with quenching of dipolar coupling through selective deuterium substitution is shown to be a useful method for elucidating intra- and intermolecular interactions in solution, with 2′,3′-isopropylideneadenosine as an example. Average distances between H-8 and ribose protons are determine in combination with carbon-13 T₁ measurement. The method is compared with the nuclear Overhauser effect.     

Catalytic asymmetric desymmetrization of cyclic meso-1,3- and 1,4-diols by a phosphinite derivative of quinidine

Asymmetric monobenzoylation reactions of cyclic meso-1,3- and 1,4-diols were catalyzed by a phosphinite derivative of quinidine to afford the corresponding monobenzoylated diol with good yield and enantioselectivity. [reaction: see text]     

Synthesis of crown ether-terminated poly(methyl methacrylate) by radical chain transfer polymerization

Mercapto-16-crown-5 was prepared starting from tetraethyleneglycol and 3-chloro-2-chloromethyl-1-propene. Radical polymerization of methyl methacrylate was carried out in the presence of mercapto-16-crown-5 as a chain transfer agent to give crown ether-terminated poly(methyl methacrylate). The end crown group was characterized by IR and ¹H-NMR spectra. Sodium cation was selectively extracted by this crown-containing polymer. The molecular weight of the obtained polymer had influence upon the ability of extraction of sodium cation.