Fast and Robust Nanocellulose Width Estimation Using Turbidimetry

The dimensions of nanocelluloses are important factors in controlling their material properties. The present study reports a fast and robust method for estimating the widths of individual nanocellulose particles based on the turbidities of their water dispersions. Seven types of nanocellulose, including short and rigid cellulose nanocrystals and long and flexible cellulose nanofibers, are prepared via different processes. Their widths are calculated from the respective turbidity plots of their water dispersions, based on the theory of light scattering by thin and long particles. The turbidity‐derived widths of the seven nanocelluloses range from 2 to 10 nm, and show good correlations with the thicknesses of nanocellulose particles spread on flat mica surfaces determined using atomic force microscopy.

     

Synthesis of a Hematoside Analog Containing Phytosphingosine and α-Hydroxyfatty Acid

Abstract

The hematoside analog 1 [NeuGcα(2→3)Galβ(1→4)Glcβ(1→1)Cer], which contains a phytosphingosine as a sphingoid base and an α-hydroxyfatty acid, has been synthesized. Coupling of the methyl (methyl 5-benzyloxyacetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-2-thio-D-glycero-α- and -β-D-galacto-2-nonulopyranosid)onate 5, prepared from the corresponding 5-acetamido derivative 2, with a lactose derivative 6 afforded sialolactoside 7, which was converted to the corresponding trichloroacetimidate 10. Glycosylation of 10 with the ceramide tribenzoate 12 gave the protected hematoside analog 13, which was deprotected to the hematoside analog 1.     

Organic high-spin systems: Synthesis,electrochemical and spectroscopic studies of π-extended tetraaryl m-phenylenediamines

Three highly π-extended tetraaryl-1,3-phenylenediamines for charged high-spin molecular systems were successfully synthesized using Suzuki coupling. Their electrochemical and spectroscopic properties were also examined. They showed blue fluorescence. The dications derived from highly π-extended tetraaryl-1,3-phenylenediamines were generated and characterized by electron transfer stopped-flow method.     

Bending properties and cell wall structure of alkali-treated wood

Bending tests and X-ray diffraction studies were conducted on oven-dried wood samples (Picea jezoensis Carr.) treated with various concentrations of aqueous NaOH solution to investigate the influence of alkali treatment on the longitudinal contraction, bending properties, and cellulose structure. The length of the wood samples decreased and the density increased at NaOH concentrations greater than 10%. The Young’s modulus and the specific Young’s modulus decreased and the strain at yield increased for the same concentration range. However, the stress at yield was almost constant for all concentration ranges. X-ray diffraction analysis showed that lattice transformation from cellulose I to cellulose II did not occur during alkali treatment and the crystallinity index decreased at NaOH concentrations greater than 10%. The crystallinity index was linearly correlated with the changes in longitudinal contraction and the bending properties, which indicates that the increase in the proportion of amorphous components of the cellulose influences the longitudinal contraction and the bending properties of wood samples during alkali treatment.     

Inelastic collisional effect on a dilute granular shock layer with a heated wall

The inelastic collisional effect on a shock layer of a dilute granular gas with a heated wall is numerically studied. To investigate the inelastic collisional effect via the gain term in the inelastic Boltzmann equation on the shock layer, an inelastic Bhatnagar-Gross-Krook (BGK) type equation, whose loss term is equivalent to that in the inelastic Boltzmann equation, is formulated on the basis of the kinetic theory of the granular gas. The inelastic BGK-type equation formulated for a hard-sphere particle is generalized to that for an inverse power law (IPL) molecule. Numerical results in a weakly inelastic regime confirm the nonequilirium contribution to the cooling rate, when the collision frequency depends on the particle velocity. The profile of the negative high-velocity tail of the distribution function in the generation regime of the shock wave obtained by the Direct Simulation Monte Carlo method is higher than that obtained by the proposed BGK-type equation when the collision frequency depends on the particle velocity because of the inelastic collisional effect via the gain term in the inelastic Boltzmann equation, which is not included in the proposed BGK-type equation.     

Superconducting characteristics and microstructure of polycrystalline Zn-doped In2O3 films

In order to investigate the relation among the superconducting transition T_c, carrier density n, resistivity ρ and the microstructure in the polycrystalline (In₂O₃)_1?x–(ZnO)_x films, we prepared specimen films by post annealing of amorphous films with x = 0.025 at various annealing temperature T_a and for annealing time t_a = 1 h and 4 h. As for microstructures, we have investigated the distribution of elements by scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS). We have found followings: (1) The annealed films clearly show the superconductivity of which T_c depends on T_a, t_a and n. This indicates that the superconductivity is determined by the combination of crystallinity and carrier density. (2) The data on STEM–EELS spectra mapping of indium plasmon indicate that droplets of the pure indium phase exist inside a film, where the distribution of these droplets dispersed. Therefore, it seems that droplets do not form an electrical conducting path, that is, it is possible that observed superconductivity is due to intrinsic characteristic of polycrystalline (In₂O₃)_1?x–(ZnO)_x films.     

Hard magnetic properties of anisotropic Sm-Fe-N magnets produced by compression shearing method

Anisotropic Sm-Fe-N bulk magnets were produced by the compression shearing method using a hardened steel plate and a tungsten-carbide (WC) plate. It was found that the magnets retained the original Sm₂Fe₁₇N₃ phase structure without any appreciable decomposition of the Sm₂Fe₁₇N₃ phase. The anisotropic Sm-Fe-N bulk magnet produced using a WC plate had a higher density and higher crystallographic alignment of the Sm₂Fe₁₇N₃ phase than that produced using a hardened steel plate, and exhibited high maximum energy products of 228 kJ/m³ with a high coercivity of 0.88 MA/m.     

A case of Budd-Chiari syndrome: Gd-EOB-DTPA-enhanced MR findings

Budd-Chiari syndrome (BCS) is a rare disorder caused by the obstruction of hepatic venous outflow, leading to sinusoidal congestion, ischemic injury to liver cells and portal hypertension. Long-term survival largely depends on whether hepatocellular carcinoma occurs. A recently available liver-specific contrast medium, gadolinium-ethoxybenzyl-diethylenetriamine penta-acetic acid (Gd-EOB-DTPA), reportedly has high diagnostic capability for detection of malignant liver tumors. However, there has been no report of the sue of Gd-EOB-DTPA-enhanced magnetic resonance imaging (MRI) for BCS. We present a case of chronic BCS who underwent both gadopentetate dimeglumine (Gd-DTPA) and Gd-EOB-DTPA-enhanced MRI. Hepatic congestion and edema were seen as slightly hypointense areas on Gd-EOB-DTPA-enhanced hepatobiliary-phase images, although these areas were observed as slightly hyperintense on previously obtained Gd-DTPA-enhanced delayed-phase image. Reduced uptake of Gd-EOB-DTPA by hepatocytes in the region of congestion or edema may account for this difference, which should be recognized in image interpretations.     

Entropy of random chaotic interval map with noise which causes coarse-graining

A random chaotic interval map with noise which causes coarse-graining induces a finite-state Markov chain. For a map topologically conjugate to a piecewise-linear map with the Lebesgue measure being ergodic, we prove that the Shannon entropy for the induced Markov chain possesses a finite limit as the noise level tends to zero. In most cases, the limit turns out to be strictly greater than the Lyapunov exponent of the original map without noise.     

Product line selection and pricing under a share-of-surplus choice model

Product line selection and pricing decisions are critical to the profitability of many firms, particularly in today’s competitive business environment in which providers of goods and services are offering a broad array of products to satisfy customer needs.We address the problem of selecting a set of products to offer and their prices when customers select among the offered products according to a share-of-surplus choice model. A customer’s surplus is defined as the difference between his utility (willingness to pay) and the price of the product. Under the share-of-surplus model, the fraction of a customer segment that selects a product is defined as the ratio of the segment’s surplus from this particular product to the segment’s total surplus across all offered products with positive surplus for that segment.We develop a heuristic procedure for this non-concave, mixed-integer optimization problem. The procedure utilizes simulated annealing to handle the binary product selection variables, and a steepest-ascent-style procedure that relies on certain structural properties of the objective function to handle the non-concave, continuous portion of the problem involving the prices. We also develop a variant of our procedure to handle uncertainty in customer utilities. In computational studies, our basic procedures perform extremely well, producing solutions whose objective values are within about 5% of those obtained via enumerative methods. Our procedure to handle uncertain utilities also performs well, producing solutions with expected profit values that are roughly 10% higher than the corresponding expected profits from solutions obtained under the assumption of deterministic utilities.