A synthetic approach to (+)-aldosterone and its relatives (2)- a stereoselective synthesis of (+)-trans-4,5-(4-methoxybenzo)- 1β , 7aβ - ( 2α-methoxymethyl- 5 -oxofuro) hydrindane

A stereoselectivity in an intramolecular cycloaddition of the olefinic $\text{o}$-quinodimethanes 13 and 23 generated $\text{in}$$\text{situ}$ from the thermolysis of optically active 4β-[2-(4-methoxybenzocyclobutenyl)ethyl] -5α-methoxymethyl-3-phenyl-thio-methylenefuran-2-ones 12 and 22, respectively, is studied and a stereoselective synthesis of (+)-$\text{trans}$-4,5-( 4-methoxybenzo) -1β,7aβ-(2α-methoxymethyl-5-oxofuro)hydrindane 1 is also described.     

Catalytic specificity exhibited by p-sulfonatocalix[n]arenes in the methanolysis of N-acetyl-l-amino acids

Specific acid catalysis of p-sulfonatocalix[n]arenes (n = 4, Calix-S4; n = 6, Calix-S6; n = 8, Calix-S8) was observed in the alcoholysis of N-acetyl-l-amino acids in methanol. The methanolysis rates of basic amino acid substrates (His, Lys, and Arg) were markedly enhanced in the presence of Calix-Sn, as compared with rates observed with p-hydroxybenzenesulfonic acid (pHBS), which is a noncyclic analogue of Calix-Sn. This catalytic effect of Calix-Sn was not observed for the methanolysis of Phe, Tyr, and Trp substrates. On the other hand, (1)H NMR experiments following the effect of Calix-Sn on N-acetyl-l-amino acid substrates in CD(3)OD showed that the spectrum of a mixture of the His substrate with Calix-Sn was significantly different from the combined spectra of the respective compounds. These changes in spectra support the formation of an inclusion complex of Calix-Sn with basic amino acids. Furthermore, it was obvious that methanolysis of the His substrate catalyzed by Calix-S4 and Calix-S6 obeyed Michaelis-Menten kinetics. These results indicate that the catalytic activity of Calix-Sn originates from its forming a complex with specific substrates (basic amino acids), similar to enzymatic reactions.     

Cubic phases of 4′-n-alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC-n)

The structure of the thermotropic cubic phases of 4′- ⁿ -alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC- ⁿ , where ⁿ indicates the number of carbon atoms in the alkoxy group) was studied by X-ray diffraction. For the homologues with ⁿ = 15, 16, 17, and 18, the cubic phase was of an ^Ia 3 ^d type, whereas the homologues with ⁿ = 19, 20, and 21 exhibited an ^Im 3 ^m cubic structure; for these seven homologues the same type of cubic structure was observed both on heating and cooling. Further lengthening of the alkoxy chain to ⁿ = 22 and 26, however, gave two types of cubic structure in the cubic phase region on heating, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d symmetry in the high temperature region. On cooling, the two homologues exhibited the ^Ia 3 ^d cubic structure only. This is the first example in the cubic phase region of a series of homologues containing two types of structure, dependent on temperature and ⁿ . Such a complicated phase diagram in the cubic region is clearly understood qualitatively in terms of Gibbs free energy-temperature diagrams. The dependence of structural parameters such as the cubic lattice constant on the alkoxy chain length ⁿ are also presented and discussed.     

Global Structure-Acute Toxicity Relationships for Mice Using Structural Parameter Ratios: New Approach to Molecular Design and Screening

Abstract

A method for a preliminary survey of the relationship between molecular structure and performance was described using 1506 random data of structure-acute toxicity for mice (intravenously dosed). The structural patterns of the weakest toxic structures (111) were extracted from the data and the patterns discriminated for 64.2% of the other structures (1395). As for the 826 structures of strongest toxicity, 78.3% were discriminated by these structural patterns. These results were obtained by using structural parameter ratios to describe the structural patterns and the exhaustive elimination process to select the best parameter ratio from many candidates. The results were summarized in the form of a chart which can be used for practical screening for the weakest toxic structures.     

Modification effect of spherical zirconia with SiCl4 as a support of methylaluminoxane for heterogeneous single-site catalyst

Unmodified and SiCl₄-modified spherical zirconia-supported methylaluminoxane were used as cocatalyst for propylene polymerization as well as ethylene/1-hexene copolymerization in combined with Me₂Si(η³-C₁₃H₈)(η¹-N^tBu)TiMe₂ (1) at 0 °C. The modification with SiCl₄ improved the catalytic activity. The improvement was clearer in ethylene/1-hexene copolymerization than in propylene polymerization. The number average molecular weight (M_n) of polypropylenes increased linearly against the polymerization time regardless the cocatalyst used to give polymers with narrow molecular weight distribution (M_w/M_n < 1.32), indicating the living nature of the catalytic systems. Thus, propagation rate constant (k_p) and the number of active centers (C^*) were evaluated from M_n and the number of polymer-chains. When the zirconia was modified with SiCl₄, the k_p value decreased and the C^* increased. The latter effect was more significant to enhance the catalytic activity.     

Synthesis of Novel Spiro[indol-2,2′-pyrroles] Using Isocyanide-Based Multicomponent Reaction

An efficient and facile method for the synthesis of novel spiro[indole-2,2′-pyrroles] from N-methyl-3-isatin imines, t-butyl isocyanide, and dialkyl acetylenedicarboxylate has been achieved by [3 + 2] cyclo addition reaction. All the products were purified by column chromatography as yellow solids and confirmed with ¹H NMR, ¹³C NMR, fast atom bombardment, mass, and infrared. Compound 11 was further confirmed with x-ray analysis.     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.