Synthesis of photoreactive polyimide having indan structure

Polyimide containing an indan unit and alkyl moiety with a high molecular weight was prepared from 5,7‐diamino‐1,1,4,6‐tetramethylindan and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. This polyimide was amorphous and soluble in common organic solvents, such as tetrahydrofuran, chloroform, and cyclopentanone. Thermogravimetry of the polyimide showed good thermal stability, indicating that a 10% weight loss of the polyimide was observed at 500 °C in nitrogen. The glass‐transition temperature of the polyimide was not observed by DSC measurement between room temperature and 400 °C at a heating rate of 10 °C/min (Apparatus: DSC3100 MAC Science Co., Ltd.). Transparency of the polyimide at 365 nm was 80%. The polyimide acted as a photosensitive resist of negative type by UV radiation. The resist had a sensitivity of 31 mJ/cm² and a contrast of 2.3 when it was developed with cyclopentanone at room temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 423–428, 2002     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Secondary hypervalent I(III)...O interactions: synthesis and structure of hypervalent complexes of diphenyl-lambda3-iodanes with 18-crown-6

Reported here for the first time are the synthesis and characterization of supramolecular complexes between diaryl-lambda(3)-iodanes and 18-crown-6 (18C6). Slow evaporation of solvents afforded 1:1 and 2:1 complexes between Ph(2)IBF(4) and 18C6 as stable crystals, depending on the conditions. X-ray crystal structures of these complexes indicated that each iodine atom contacts with the three adjacent oxygen atoms of 18C6 through two hypervalent secondary bonding and a weak interaction. (1)H NMR analyses and CSI-MS spectra showed that, in dichloromethane solution, Ph(2)IBF(4) exclusively forms the 1:1 complex with 18C6 (binding constant K(a), 1.02 x 10(3) M(-)(1)). The binding constants decrease with the increased solvent donor ability (Gutmann's DN). Changing the heteroatom ligand from BF(4) to the less nucleophilic PF(6) and AsF(6) increased the binding constant by about six times. Substitution of an electron-withdrawing group onto the para position of Ph(2)IBF(4) tends to increase in the complex stability. A linear Hammett relationship (rho = 0.59) between log K(a) and sigma(p)(+) values of substituents indicates that the diaryl-lambda(3)-iodanes with electropositive iodine(III) interact more efficiently with 18C6. Decreased binding magnitude was measured with 15C5, dibenzo-18C6, dibenzo-21C7, and dibenzo-30C10.     

An intramolecular diels-alder approach to quassinoids—a stereoselective construction of a-aromatic klaineanone

Thermolysis of a benzocyclobutene derivative ($\text{20}$) prepared from norcamphor produced stereoselectively a tetracyclic compound ($\text{2}$), which was converted to a lactone ($\text{21}$) having correct stereochemistry at C₇, C₈, C₉, C₁₁, C₁₃, and C₁₄ positions of (±)-klaineanone.     

Dipole moments of (styrene-p-chlorostyrene) triblock copolymers in solutions

(Styrene-p-chlorostyrene) triblock copolymers of the ABA and BAB types (A—polystyrene; B—poly-p-chlorostyrene) were prepared by anionic polymerization and their conformational behaviours in solutions were studied from measurements of the dipole moments. Two solvents, toluene and cumene, were used for the study; toluene is a good solvent for both polystyrene and poly-p-chlorostyrene whereas cumene is a selective solvent, good for polystyrene but poor for poly-p-chlorostyrene. It was found that the dipole moments of the block copolymers measured in toluene are the same for the ABA and BAB copolymers; in cumene however the dipole moment of the BAB copolymer is smaller than that of the ABA copolymer. The results give an additional support to our previous conclusion that the conformation of the block copolymers in a good solvent such as toluene could be approximated with a pseudo-random coil form; in a selective solvent, however, some anomalies take place in the conformation of the block copolymers, as deduced from intrinsic viscosity, osmotic pressure and light scattering measurements.     

Synthesis and antifungal activities of a series of (1,2-disubstituted vinyl)imidazoles.

A series of vinylimidazoles containing a hetero atom such as sulfur or oxygen at a beta-position of the vinyl group was prepared and the antifungal activities were tested. It was found that sulfur-substituted derivatives such as (E)-1-[2-(methylthio)-1-[2-(pentyloxy)phenyl]ethenyl]-1H-imidazole (5a-5) and (E)-1-[1-[2-(hexyloxy)phenyl]-2-(methylthio)ethenyl]-1H-imidazole (5a-6) showed excellent antifungal activities against dermatophytes and yeast cells. The stereochemistry of the hydrochloride salt of 5a-5 was determined by X-ray crystallography. The structure-activity relationships were discussed.     

Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

The diazocarbene (CNN) molecule: characterization of the X 3Sigma- and A 3Pi electronic states

The ground (X (3)Sigma(-)) and first excited triplet (A (3)Pi) electronic states of diazocarbene (CNN) have been investigated systematically starting from the self-consistent-field theory and proceeding to the coupled cluster with single, double, and full triple excitations (CCSDT) method with a wide range of basis sets. While the linear X (3)Sigma(-) ground state of CNN has a real degenerate bending vibrational frequency, the A (3)Pi state of CNN is subject to the Renner-Teller effect and presents two distinct real vibrational frequencies along the bending coordinate. The bending vibrational frequencies of the A (3)Pi state were evaluated via the equation-of-motion coupled cluster (EOM-CC) techniques. The significant sensitivity to level of theory in predicting the ground-state geometry, harmonic vibrational frequencies, and associated infrared intensities has been attributed to the fact that the reference wave function is strongly perturbed by the excitations of 1pi-->3pi followed by a spin flip. At the highest level of theory with the largest basis set, correlation-consistent polarized valence quadruple zeta (cc-pVQZ) CCSDT, the classical X-A splitting (T(e) value) was predicted to be 68.5 kcal/mol (2.97 eV, 24 000 cm(-1)) and the quantum mechanical splitting (T(0) value) to be 69.7 kcal/mol (3.02 eV, 24 400 cm(-1)), which are in excellent agreement with the experimental T(0) values, 67.5-68.2 kcal/mol (2.93-2.96 eV, 23 600-23 900 cm(-1)). With the EOM-CCSD method the Renner parameter (epsilon) and averaged bending vibrational frequency (omega(2)) for the A (3)Pi state were evaluated to be epsilon=-0.118 and omega(2)=615 cm(-1), respectively. They are in fair agreement with the experimental values of epsilon=-0.07 and nu(2)=525 cm(-1).     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.