Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Magnetic circular dichroism and anomalous fluorescence spectra of [2,2] (2,6)azulenophanes

The electronic absorption spectra of syn-[2,2] (2,6) azulenophane (1) and anti-[2,2] (2,6)azulenophane (2) were investigated via magnetic circular dichroism spectra. The anomalous fluorescence spectra were also observed. From the assignment of the absorption spectra, it was concluded that molecules 1 and 2 emitted the fluorescence from the third excited singlet state.     

Theoretical prediction of electronic structures of fully pi-conjugated zinc oligoporphyrins with curved surface structures

A theoretical prediction of the electronic structures of fully pi-conjugated zinc oligoporphyrins with curved surface, ring, tube, and ball-shaped structures was conducted as the objective for the future development of triply meso-meso-, beta-beta-, and beta-beta-linked planar zinc oligoporphyrins. The excitation energies and oscillator strengths for the optimal ring and ball structures were calculated using the time-dependent density functional theory (DFT). Although there is an extremely small energy difference of < 0.1 eV between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the ring structure relative to the same-sized triply linked planar one, the Q and B bands of the former are smaller redshifted excitation energies and intensified oscillator strengths than those of the latter due to the structurally shortened effective pi-conjugated lengths for the electron transition. It is expected that the ball structure becomes an excellent electron acceptor and shows the highly redshifted Q' band in the near-IR region relative to the monomer. The minimum value of the HOMO-LUMO energy gaps of the infinite-length ring structures was estimated using periodic boundary conditions within the DFT, resulting in the metallic characters of both the tube structures with and without the spiral triply linked porphyrin array. The relation between the diameters and strain energies of the tube and ball structures was also examined. The present fused zinc porphyrins may become more colorful materials with new optelectronic properties including artificial photosynthesis than the carbon nanotubes and fullerenes when the axial coordinations of the central metal of porphyrins are functionally used.     

Guest-induced assembly of tetracarboxyl-cavitand and tetra(3-pyridyl)-cavitand into a heterodimeric capsule via hydrogen bonds and CH-halogen and/or CH-pi interaction: control of the orientation of the encapsulated guest

The guest- or solvent-induced assembly of a tetracarboxyl-cavitand 1 and a tetra(3-pyridyl)-cavitand 2 into a heterodimeric capsule 1.2 in a rim-to-rim fashion via four intermolecular CO(2)H.N hydrogen bonds has been investigated both in solution and in the solid state. In the (1)H NMR study, a 1:1 mixture of1a and 2a (R = (CH(2))(6)CH(3)) in CDCl(3) gave a mixture of various complicated aggregates, whereas this mixture in CDCl(2)CDCl(2) or p-xylene-d(10) exclusively produced the heterodimeric capsule 1a.2a. It was found that an appropriate 1,4-disubstituted-benzene is a suitable guest for inducing the exclusive formation of 1a.2a in CDCl(3). The ability of a guest to induce the formation of guest-encapsulating heterodimeric capsule, guest@(1a.2a), increased in the order p-ethyltoluene < 1-ethyl-4-methoxybenzene < or = 1-ethyl-4-iodobenzene < or = 1,4-dibromobenzene < 1-iodo-4-methoxybenzene < or= 1,4-dimethoxybenzene < or = 1,4-diiodobenzene. The (1)H NMR study revealed that a CH-halogen interaction between the inner protons of the methylene-bridge rims (-O-H(out)CH(in)-O-) of the 1a and 2a units and the halogen atoms of 1,4-dihalobenzenes and a CH-pi interaction between the methoxy protons of 1,4-dimethoxybenzene and the aromatic cavities of the 1a and 2a units play important roles in the formation of 1,4-dihalobenzene@(1a.2a) and 1,4-dimethoxybenzene@(1a.2a), respectively. A preliminary single-crystal X-ray diffraction analysis of guest@(1b.2b) (R = (CH(2))(2)Ph; guest = 1-iodo-4-methoxybenzene or p-xylene) confirmed that the guest encapsulated in 1b.2b is oriented with the long axis of the guest along the long axis of 1b.2b and that the iodo and the methoxy groups of the encapsulated 1-iodo-4-methoxybenzene are specifically oriented with respect to the cavities of the 2b and 1b units, respectively.     

Isolation and structure determination of a new marine toxin,neosurugatoxin, from the Japanese Ivory Shell, Babylonia japonica.

A new toxin, named neosurugatoxin, was isolated from the toxic Japanese Ivory Shell and its structure was determined by X-ray crystallographic analysis.     

Epoxidation of alpha,beta-unsaturated ketones using hydrogen peroxide in the presence of basic hydrotalcite catalysts

The basic layered hydrotalcites have been used as catalysts for the epoxidation of alpha,beta-unsaturated ketones in heterogeneous reaction media using hydrogen peroxide as an oxidant. A wide variety of alpha,beta-unsaturated ketones were oxidized to the corresponding epoxyketones in excellent yields under mild reaction conditions. For example, 2-cyclohexen-1-one gave 2,3-epoxycyclohexanone in 91% yield at 40 degrees C for 5 h with high efficiency in hydrogen peroxide. The catalytic activity of the hydrotalcites increased as the basicity of their surfaces increased. In the case of the epoxidation of less reactive substrates, adding a cationic surfactant such as n-dodecyltrimethylammonium bromide (DTMAB) to the above oxidation system accelerated the epoxidation reaction. These hydrotalcite catalysts were easily separated from the reaction mixture and were reusable.     

Induction of a remarkable conformational change in a human telomeric sequence by the binding of naphthyridine dimer: inhibition of the elongation of a telomeric repeat by telomerase

The binding of a dimeric form of the 2-amino-1,8-naphthyridine derivative (naphthyridine dimer) to a human telomeric sequence, TTAGGG, was investigated by UV melting, CD spectra, and CSI-MS measurements. Both the 9-mer d(TTAGGGTTA) and the 15-mer d(TTAGGGTTAGGGTTA) showed apparent melting temperatures (T(m)) of 45.6 and 63.6 degrees C, respectively, in the presence of naphthyridine dimer (30 microM) in sodium cacodylate buffer (50 mM, pH 7.0) containing 100 mM NaCl. The CD spectra at 235 and 255 nm of the 9-mer increased in intensity accompanied with strong induced CDs at 285 and 340 nm upon complex formation with naphthyridine dimer. UV titration of the binding of naphthyridine dimer to the 9-mer at 320 nm showed a hypochromism of the spectra. A Scatchard plot of the data showed the presence of multiple binding sites with different association constants. Cold spray ionization mass spectrometry of the complex between naphthyridine dimer and the 9-mer clearly showed that one to three molecules of the ligand bound to the dimer duplex of the 9-mer. Telomeric repeat elongation assay showed that the binding of naphthyridine dimer to the telomeric sequence inhibits the elongation of the sequence by telomerase.     

Regioselective Borylation of Porphyrins by C?H Bond Activation under Iridium Catalysis to Afford Useful Building Blocks for Porphyrin Assemblies

Highly regioselective and efficient borylation of a variety of porphyrins has been achieved by reaction with bis(pinacolato)diboron through C? H bond activation under iridium catalysis on the basis of the synthetic protocol developed by Miyaura, Hartwig, and Smith. A boryl group can be selectively introduced at sterically uncongested positions in the peripheral aryl groups of porphyrin substrates whose peripheral β‐positions are sterically hindered. Curiously, β substituents adjacent to the aryl group to be borylated have unexpectedly large effects on the regioselectivity, because the iridium catalyst can discriminate between subtle steric differences. Chemoselective borylation was also achieved for several functionalized porphyrins. This borylation protocol can be applied to various monomeric and oligomeric functional porphyrins, hence offering an efficient route to elaborate multiporphyrin‐based molecular constructs.     

Experimental demonstration of plasmonic racetrack resonators with a trench structure

We fabricated and investigated a plasmonic racetrack resonator with a trench structure. Trench channel plasmon polaritons excited by end-fire coupling at a wavelength of 633 nm are observed in the fabricated racetrack resonator. The racetrack resonator also worked as a plasmonic racetrack resonator. The experimental and simulation results of the electric field distributions are in good agreement.