Laser induced fluorencence matrix study of 1,3-difluorobenzene radical cation

Laser induced fluorescence excitation and resolved emission spectra of 1,3-C₆H₄F⁺₂ are obtained in a Ne matrix with high signal/noise despite the ion's low emission quantum yield. The ground state vibrational structure is mostly regular but that of the upper is very irregular suggesting nearly degenerate, mutually perturbing, excited states.     

An evaluation of the performance of porous polymer monolith assisted electrospray

A novel electrospray interface, which has distinct advantages over conventional pulled silica emitters, has been developed. This novel interface can be easily fabricated by forming a porous polymer monolith (PPM) at the end of a fused-silica capillary that facilitates a stable electrospray over a wide range of flow rates with only a modest increase in back-pressure. A comparison was made between the PPM-assisted electrospray and a commercial nanosprayer in terms of sensitivity, stability and robustness. A PPM-filled electrospray tip produced a day-to-day signal variation of 23% relative standard deviation (RSD) over a 3-day period when spraying a 1.0 microM test peptide solution. Furthermore, three different capillaries fabricated by the same process produced a signal variation of 17% RSD, indicating that the fabrication process shows good reproducibility. The multiple flow paths of the PPM function to split the flow and reduce clogging. Even following the accumulation of debris after prolonged use, a stable spray could still be generated with the PPM-filled capillary while the commercial nanosprayer ceased to function properly. In terms of sensitivity, PPM-assisted electrospray showed an enhancement in sensitivity at infusion flow rates between 100 to 1000 nL/min while commercial nanosprayers performed slightly better at flow rates below 100 nL/min. A sample purification step can be combined with the PPM-assisted sprayer, using the PPM as a stationary phase to desalt and preconcentrate samples prior to mass spectrometric detection.     

Exit times of N-dimensional random walks

Summary We study the exit time T of a sum of independent, identically distributed random vectors, X ₁, X ₂, ..., from a subset R of N dimensional Euclidean space when N2. We assume that R is invariant under positive dilations and that the boundary of R satisfies certain regularity conditions. The random vector X ₁ is to have mean zero and a nonsingular covariance matrix. We show that there is a critical exponent, e, independent of X ₁, X ₂, ..., such that 0<pET ^p/2<. In addition, if X ₁ is bounded and slightly more restrictive assumptions are imposed on R, then p>e implies ET ^p/2=.This paper constitutes a portion of the author's Ph.D. dissertation written at the University of Illinois     

Dispersed fluorescence spectroscopy of primary and secondary alkoxy radicals

Dispersed fluorescence (DF) spectra of 1-propoxy, 1-butoxy, 2-propoxy, and 2-butoxy radicals have been observed under supersonic jet cooling conditions by pumping different vibronic bands of the B-X laser induced fluorescence excitation spectrum. The DF spectra were recorded for both conformers of 1-propoxy, three conformers of the possible five of 1-butoxy, the one possible conformer of 2-propoxy, and two conformers of the possible three of 2-butoxy. Analysis of the spectra yields the energy separations of the vibrationless levels of the ground X and low-lying A electronic state as well as their vibrational frequencies. In all cases, the vibrational structure of the DF spectra is dominated by a CO stretch progression yielding the nuCO stretching frequency for the X state and in most cases for the A state. In addition to the experimental work, quantum chemical calculations were carried out to aid the assignment of the vibrational levels of the X state and for some conformers the A state as well. Geometry optimizations of the different conformers of the isomers were performed and their energy differences in the ground states were determined. The results of the calculation of the energy separations of the close-lying X and A states of the different conformations are provided for comparison with the experimental observations.     

The direct detection of an aryl azide excited state: an ultrafast study of the photochemistry of para- and ortho-biphenyl azide

Ultrafast laser flash photolysis (266 nm) of para- and ortho-biphenyl azide in acetonitrile produces azide excited states that have broad absorption bands centered at 480 nm. The para-biphenyl azide excited singlet state has a lifetime of 100 fs. The excited-state lifetime of the ortho-azide isomer is 450 +/- 150 fs. Decay of the azide excited states is accompanied by the formation of the corresponding known singlet nitrenes (para, lambdamax = 350 nm, ortho, lambdamax = 400 nm). Singlet para-biphenylnitrene is born with excess energy and undergoes vibrational cooling with a time constant of 11 ps to form the long-lived (tau approximately 9 ns) relaxed singlet nitrene. Singlet ortho-biphenylnitrene decays with a lifetime of 16 ps in acetonitrile at ambient temperature.     

Dissociation of Fumaric Acid: Spectrophotometric Investigation in Aqueous Solutions from 10 to 90 <Superscript>∘</Superscript>C and Theoretical Considerations

The dissociation constants of fumaric acid were extracted from UV-vis spectra in the 10–90 ^∘C range. These values were used to extract thermodynamic parameters that showed the temperature effects on the dissociations reactions to be dominantly driven by the solvent. The molar absorption coefficients for the fumaric acid, the bifumarate and fumarate species, can be accurately reproduced with the two-term Gauss–Lorentz equation. Deconvolution of these bands showed strong π–π^∗ transitions for all species and weaker charge-transfer-to-solvent transitions for the charged species. TD-DFT calculations were used to identify the most important molecular orbitals involved in the vertical excitations of the fumaric acid species. The electron population and their states of delocalization were also estimated with topological analyses of the electron density and of the Becke–Edgecombe Electron Localization Function.     

The Australian perspective

This presentation deals with issues of comparability and traceability in food analysis in Australia from several perspectives. This includes the current national (Australian) and increasingly international (Codex) performance-based approach to food analysis. The Australian food regulatory process will be described, particularly those aspects that impact on the analysis of food in a regulatory sense. This section will also describe two areas where specific methods have been mandated in legislation and discuss two case studies where the analytical method has impacted on the elaboration of standards. Other areas to be covered include regulation/requirements relating to supply/availability of reference materials, the use of proficiency testing as a means of ensuring comparability, and, finally, some thoughts on what role BIPM/CCQM may play in the analysis of food.Electronic Supplementary Material  Supplementary material is available for this article at

Extraction of phenolic compounds and organic acids by liquid membranes

Liquid membrane emulsions were used to extract phenolic compounds and organic acids from their aqueous solutions. The emulsions contained caustic as the reactive agent. When the phenolic compounds and organic acids permeated through the liquid membranes into the emulsion droplets, they reacted with caustic and became ionized. The ionized species could not permeate through the liquid membranes and therefore were held in the emulsion droplets.

The conclusions of this recent investigation are:

(1) More than 99% of phenol and cresols can be extracted in less than 1 minute.

(2) Acetic and propionic acids can also be extracted but at much slower rates. However, if the amount of caustic is not sufficient to react with all the permeating compounds, the acids will be extracted preferentially to the phenols.

(3) The acids can only be extracted at low pH (acidic) whereas the phenolic compounds can be extracted at pH of 7.

(4) The extraction rates for phenol and acetic acid are the same in individual-compound and binary-mixture permeations.

(5) The extraction can be described by a mass transfer model.     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.     

Sensitivity-enhanced quantitative 13C NMR spectroscopy via cancellation of 1J(CH) dependence in DEPT polarization transfers

A scheme has been developed to eliminate virtually all signal intensity dependence on 1JCH in polarization transfers between 1H and 13C nuclei, reducing differences in signal intensity to only 1.5% over the entire natural 1JCH range. The scheme relies on the summation of time-domain data acquired with four suitably selected Delta delays so that the J dependence is essentially canceled in the final, signal-averaged free-induction decay. These Delta delays have been incorporated into the DEPT pulse sequence to create sensitivity-enhanced experiments for collecting quantitative 13C{1H} spectra. Four experiments, each with unique read pulse angles, give quantitative spectra with 200-300% more sensitivity than conventional 13C spectra acquired with inverse-gated 1H decoupling. The experiments are ideal for recording spectra with improved quantitative information or for substantially reducing the long acquisition times indicative of quantitative 13C experiments. The ability of the experiments to provide quantitative spectra was demonstrated with a simple ethylbenzene solution, however, they can easily be adapted to various applications for analysis of complex mixtures.