Overtone spectroscopy of H2D+ and D2H+ using laser induced reactions

The method of laser induced reaction is used to obtain high-resolution IR spectra of H2D+ and D2H+ in collision with n-H2 at a nominal temperature of 17 K. For this purpose three cw-laser systems have been coupled to a 22-pole ion trap apparatus, two commercial diode laser systems in the ranges of 6100-6600 cm(-1) and 6760-7300 cm(-1), respectively, and a high-power optical parametric oscillator tunable in the range of 2600-3200 cm(-1). In total, 27 new overtone and combination transitions have been detected for H2D+ and D2H+, as well as a weak line in the nu1 vibrational band of H2D+ (2(20)<--1(01)) at 3164.118 cm(-1). The line positions are compared to high accuracy ab initio calculations, showing small but mode-dependent differences, being largest for three vibrational quanta in the nu2 symmetric bending of H2D+. Within the experimental accuracy, the relative values of the ab initio predicted Einstein B coefficients are confirmed.     

The 2009 edition of the GEISA spectroscopic database

The updated 2009 edition of the spectroscopic database GEISA (Gestion et Etude des Informations Spectroscopiques Atmosphériques; Management and Study of Atmospheric Spectroscopic Information) is described in this paper. GEISA is a computer-accessible system comprising three independent sub-databases devoted, respectively, to: line parameters, infrared and ultraviolet/visible absorption cross-sections, microphysical and optical properties of atmospheric aerosols. In this edition, 50 molecules are involved in the line parameters sub-database, including 111 isotopologues, for a total of 3,807,997 entries, in the spectral range from 10⁻⁶ to 35,877.031 cm⁻¹.The successful performances of the new generation of hyperspectral sounders depend ultimately on the accuracy to which the spectroscopic parameters of the optically active atmospheric gases are known, since they constitute an essential input to the forward radiative transfer models that are used to interpret their observations. Currently, GEISA is involved in activities related to the assessment of the capabilities of IASI (Infrared Atmospheric Sounding Interferometer; http://smsc.cnes.fr/IASI/index.htm) on board the METOP European satellite through the GEISA/IASI database derived from GEISA. Since the Metop-A (http://www.eumetsat.int) launch (19 October 2006), GEISA is the reference spectroscopic database for the validation of the level-1 IASI data. Also, GEISA is involved in planetary research, i.e., modeling of Titan's atmosphere, in the comparison with observations performed by Voyager, or by ground-based telescopes, and by the instruments on board the Cassini-Huygens mission.GEISA, continuously developed and maintained at LMD (Laboratoire de Météorologie Dynamique, France) since 1976, is implemented on the IPSL/CNRS (France) “Ether” Products and Services Centre WEB site (http://ether.ipsl.jussieu.fr), where all archived spectroscopic data can be handled through general and user friendly associated management software facilities. More than 350 researchers are registered for on line use of GEISA.     

UKRmol: a low-energy electron- and positron-molecule scattering suite

We describe the UK computational implementation of the R-matrix method for the treatment of electron and positron scattering from molecules. Recent developments in the UKRmol suite are detailed together with the collision processes it is enabling us to treat.     

Weak Line Water Vapor Spectrum in the 11 787-13 554 cm Region

Long-pathlength Fourier transform spectra of water vapor recorded previously by Schermaul et al. (J. Mole. Spectrosc.211, 169 (2002)) are analyzed in the range 11 787-13 554 cm⁻¹. Wavenumbers, absolute intensities, and self-broadening coefficients, with associated uncertainties, are presented for 2137 lines. Analysis of these lines using variational linelists has been conducted leading to the assignment of 1906 of the new lines to 23 different upper vibrational states in the 3ν+δ, 4ν, and 4ν+δ polyads, a further 19 lines are ascribed to H₂¹⁸O. Comparisons are made with the HITRAN database.     

Combining agriculture and energy industry waste products to yield recyclable,thermally healable copolymers of elemental sulfur and oleic acid

Sulfur and oleic acid, two components of industrial waste/byproducts, were combined in an effort to prepare more sustainable polymeric materials. Zinc oxide was employed to serve the dual role of compatibilizing immiscible sulfur and oleic acid as well as to suppress evolution of toxic H₂S gas during reaction at high temperature. The reaction of sulfur, oleic acid, and zinc oxide led to a series of composites, ZOS _x (x = wt % sulfur, where x is 8–99). The ZOS _x materials ranged from sticky tars to hard solids at room temperature. The ZOS _x compositions were assessed by ¹H NMR spectrometry, FTIR spectroscopy, and elemental microanalysis. Copolymers ZOS _59‐99 , were further analyzed for thermal and mechanical properties by thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. Remarkably, even ZOS ₉₉ , comprising only 1 wt % of zinc oxide/oleic acid (99 wt % S) exhibits at least an eightfold increase in storage modulus compared to sulfur alone. The four solid samples (59–99 wt % S) were thermally healable and readily remeltable with full retention of mechanical durability. These materials represent a valuable proof‐of‐concept for sustainably sourced, recyclable materials from unsaturated fatty acid waste products. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1704–1710     

Electrophoretic mobilities of PEGylated gold NPs

Electromigration of nanoparticles (NPs) is relevant to many technological and biological applications. We correlate the experimentally observed electromigration of Au NPs with a closed-form theoretical model that furnishes key NP characteristics, including the previously unknown values of Au NP core ζ-potential, PEG-corona permeability, and particle-hydrogel friction coefficient. More generally, the theory furnishes new understanding of NP electromigration in complex environments, establishing a robust and predictive model to guide the design and characterization of functionalized NPs.     

Luminescent properties of water-soluble conjugated metallopolymers and their application to fluorescent nitric oxide detection

Water-soluble pi-conjugated polymers (CPs) incorporating 5,5'-(2,2'-dipyridyl) (CP1) or 6,6'-(2,2'-dipyridyl) (CP2) units within the pi-conjugated backbone were prepared as scaffolds for macromolecular metal complexation. The response of CP emission to a range of metal ions was investigated in water, 10 mM aqueous sodium dodecyl sulfate, and acetonitrile/water (95:5). Cupric ions are the most efficient quenchers of CP emission, with K(SV) = 1.1 x 10(5) and 5.2 x 10(4) M(-1) in water for CP1a (40% bipyridyl monomer units) and CP1b (20% bipyridyl monomer units), respectively. Quenching is approximately twice as effective in acetonitrile/water (95:5) (K(SV) = 3.1 x 10(5) M(-1) for CP1a and 1.1 x 10(5) M(-1) for CP1b). Partial restoration of emission was observed upon exposure of Cu(II)-CP solutions to excess NO(g) in acetonitrile/water (95:5) or 10 mM SDS(aq).     

Mechanical activation of catalysts for C-C bond forming and anionic polymerization reactions from a single macromolecular reagent

Coupling of pyridine-capped poly(methyl acrylate)s, PyP(M) (where M corresponds to the number average molecular weight in kDa), to the SCS-cyclometalated dipalladium complex [(1)(CH(3)CN)(2)] afforded organometallic polymers [(1)(PyP(M))(2)] with a concomitant doubling in molecular weight. Ultrasonication of solutions containing [(1)(PyP(M))(2)] effected the mechanical scission of a palladium-pyridine bond, where the liberated PyP(M) was trapped with excess HBF(4) as the corresponding pyridinium salt, harnessed to effect the stoichiometric deprotonation of a colorimetric indicator, or used to catalyze the anionic polymerization of α-trifluoromethyl-2,2,2-trifluoroethyl acrylate. The mechanically induced chain scission also unmasked a catalytically active palladium species which was used to facilitate carbon-carbon bond formation between benzyl cyanide and N-tosyl imines. Spectroscopic and macromolecular analyses as well as a series of control experiments demonstrated that the aforementioned structural changes were derived from mechanical forces that originated from ultrasound-induced dissociation of the polymer chains connected to the aforementioned Pd complexes.     

A global, high accuracy ab initio dipole moment surface for the electronic ground state of the water molecule

A highly accurate, global dipole moment surface (DMS) is calculated for the water molecule using ab initio quantum chemistry methods. The new surface is named LTP2011 and is based on all-electron, internally contracted multireference configuration interaction, including size-extensivity corrections in the aug-cc-pCV6Z basis set. Dipoles are computed as energy derivatives and small corrections due to relativistic effects included. The LTP2011 DMS uses an appropriate functional form that guarantees qualitatively correct behaviour even for most high energies configuration (up to about 60,000 cm(-1)), including, in particular, along the water dissociation channel. Comparisons with high precision experimental data show agreement within 1% for medium-strength lines. The new DMS and all the ab initio data are made available in the supplementary material.     

Generation, translocation, and action of nitric oxide in living systems

Nitric oxide (NO) is a gaseous diatomic radical that is involved in a wide range of physiological and pathological functions in biology. Conceptually, the biochemistry of NO can be separated into three stages: generation (stage 1), translocation (stage 2), and action (stage 3). In stage 1 the oxygenase domain of NO synthase converts L-arginine to L-citrulline and NO (g). Owing to its short-lived nature, this molecule is converted into a different nitrogen oxide such as NO(2), an organonitrosyl such as a nitrosothiol, or a metal nitrosyl such as a heme-nitrosyl, for transportation in stage 2. Each of these derivatives features unique physical characteristics, chemical reactivity, and biological activity. Upon delivery in stage 3, NO exerts its physiological or pathological function by reaction with biomolecules containing redox-active metals or other residues.