Vibrational Spectroscopic Studies on the Hofmann Type Clathrates: M(1,6-diaminohexane)Ni(CN) 4 .G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3- or 1,4-dichlorobenzene)

New Hofmann-diaminohexane(dahxn)-type clathrates of the form M(1,6-dahxn)Ni(CN)₄.G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3 or 1,4-dichlorobenzene) were prepared inpowder form and their infrared spectra are reported. The spectral data suggest that these compounds are similar in structure to those of the Hofmann-diam-type clathrates. Their structure consists of planar polymeric layers, {M–Ni(CN)₄}, formedfrom Ni(CN)₄ anions coordinated to the bridging 1,6-diaminohexane molecules bound directly to the metal (M). The M atoms are bound to four N atoms of the CN ions and, the Ni atoms are surrounded by four C atoms of the CN groups in a square-planar layer.     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

Study on labeling conditions of125I-synkavit by the iodogen method

Labeling conditions of synkavit (2-methyl-1,4-naphthoquinol disodium phosphate) with iodine-125 have been studied. In this study, labeling temperature, reaction time, successive using of iodogen coated tubes, iodogen amount and synkavit concentrations have been determined to get optimum conditions for maximum labeling. Final results showed that when the labeling temperature, reaction time, synkavit concentration, and iodogen amount were, at room temperature, 15 min (in the case of successive using of three iodogen coated tubes), 2 mg ml^–1 and 5 mg, respectively; labeling yield was 90% and specific activities of the order of 555 GBq mmol^–1 (15 Ci mmol^–1) have been obtained.     

Radiometric titration based on colloidal and slow precipitate formation

Fluoride ions and, in about 0.005M concentration, tungstate ions form gelatinous precipitates, poorly soluble in water, with calcium ions. The radiometric determinations of the above ions are based on these reactions. Accurate radiometric determination can be carried out only if the gelatinous precipitate formed during titration can be properly separated from the solution. It has been found that in the case of fluoride ions the application of crystalline, easily filtrable Ca(COO)₂·H₂O or CaCO₃, and in the case of tungstate ions the application of CaWO₄ precipitate improves the filtration properties of⁴⁵CaF₂ and⁴⁵CaWO₄, respectively, formed during titration, whereby the radiometric determinations of the above ions become possible. Titrations were carried out with 0.05M and 0.005M CaCl₂ solutions, labelled with⁴⁵Ca.     

Gold(III) complexes with imidazole,benzoxazole, purine and pyrimidine derivatives

Summary The synthesis and characterization of Au^III complexes with several heterocyclic ligands are reported. The compounds have general formula [AuX₃(L)], where L =N-methylimidazole (N-MeIz),N-ethylimidazole (N-EtIz),N-propylimidazole (N-PrIz), benzoxazole (BO), 2-methylbenzoxazole (2-MeBO), 2,5-dimethylbenzoxazole (2,5-diMeBO), 2-amino-pyrimidine (2-APm), 4(6) -hydroxy-pyrimidine [4(6)-hydrPm] or hypoxanthine (Hypox) and X = Cl or Br. Elemental analysis, conductivity measurements and spectral studies were used for the characterization of the complexes. A square-planar geometry withN-bonded heterocyclic ligands is suggested.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

Synthese von 4H-Pyrano[2,3-d]pyrimidinen

Summary Good yields of substituted 5-(5R-2-furyl)-4H-pyrano[2,3-d]pyrimidines4 were obtained in the reaction of 2-ethoxymethyleneamino-3-cyano-4H-pyranes2 with ammonia. Compounds2 were prepared by the condensation of the starting 2-amino-5-acetyl-3-cyano-6-methyl-4H-pyranes1 with ethyl orthoformate. Spectral properties of the bicyclic system4 in relation to compounds3 are discussed.

     

Single polymer molecules adsorbed to mica and the oppositely charged polymer/surfactant complexes formed at the air–water interface visualized by atomic force microscopy

In the present study, the structure and morphology of single sodium poly(styrenesulfonate) (PSS) molecules adsorbed to mica surface from the natural aqueous solution is investigated using atomic force microscopy technique. Results show that single PSS molecules are observed which show a morphology of wormlike coils. Meanwhile, single sodium poly(styrenesulfonate) (PSS)/Hexadecyltrimethylammonium bromide (CTAB) complexes deposited on mica from the air–water interface are also observed. However, the PSS/CTA⁺ complexes show different conformations by appearing in the morphology of circular patches. Experimental data are in fair agreement with the theoretical analysis.     

Analysis of aerosols at the bosporus bridge of Istanbul

Air samples collected at the second Bosporus bridge of Istanbul which carries a heavy traffic load between Asia and Europe, were analyzed for 22 elements by the INAA method. Pb, Cd and Fe concentrations in the samples were determined by AAS. Iron concentrations were used as a cross check between the two methods. In order to define the enrichment factors for the elements in the bridge area, a sample collected from our university campus which can be considered as a rural site, was also analyzed. Differences were observed especially for Br, Al, Mg, Ti, Cu and Na between the two sites. Based on the results of the samples from the bridge, we got a value of 0.58(16) for the Br/Pb-ratio.     

On the construction of least favourable pairs of distributions

Summary Convex programming techniques were used by Witting and Krafft in [4] in order to reduce a testing problem for composite hypotheses to one for simple hypotheses. This is realized in terms of least favourable pairs of distributions, which represent the solution of the dual of a suitable program. Without further assumptions on the hypotheses, however, the results, derived that way (cf. Baumann [1], Österreicher [6] and Kusolitsch and Österreicher [5]), are of less practical impact. This is due to the fact that in this case the least favourable pairs depend on the level of the testing problem. Conditions avoiding this, were given by Huber and Strassen in [3]. These conditions make use of 2-alternating capacities in the sense of Choquet. The present paper offers a rather general principle of constructing the least favourable distribution in the case, when one of the two hypotheses is simple. This method works also for the local variation model and the Prohorov neighbourhood model in the case of monotone likelyhood ratio. For simple cases—subsuming the gross error model and the total variation model, for which the solution was given by Huber in [2]—a least favourable pair is obtained by using the mentioned technique of construction two times successively.