An integrated coupled column liquid chromatography system for the determination of leukotriene metabolites in biological samples

Summary A fully integrated chromatographic system was developed for the determination of leukotrienes in biological samples using photodiode-array detection (PDAD), which eliminates time consuming manual sample handling steps. A special solid phase extraction, (SPE) methodology for leucotriene metabolite stability was developed which increased the recoveries and eliminates the contamination risk of biological samples. The inherent instability (autooxidation) of many of the leukotriene mediators, and the adsorption effects onto exposed surfaces in vials and in the chromatographic system were found to be very important parameters to control in order to circumvent high loss of sample analytes. By binding the cell supernatants to the functionalities of the SPE support stabilised these mediators. Cell culture samples were eluted through a disposable C₁₈ SPE column. The SPE columns were allowed to thaw and deposited in an automated sample handling unit (ASPEC XL). Desorption of the analytes was followed by a second on-line SPE step, to eliminate remaining interfering matrix compounds. Typical recoveries when stored at −70°C were in-between 55–97% except for (LTE₄) which was found to be around 40% after 72 days of storage. Seven reversed-phase packings were studied. Selectivity factors, as well as the separation efficiencies, were found to differ for the various C₁₈ bonded silica stationary phases. This integrated on-line column liquid chromatographic system was applied to the determination of leukotriene B₄, leukotriene C₄, leukotriene D₄, leukotriene and E₄ in human cell extracts using prostaglandin B₂ as the internal standard. More than 1500 biological samples were analysed. Some validation data are presented for unattended operations.     

Selective Voltammetric Detection of Epinephrine in the Presence of Ascorbic Acid at Poly(4-Methoxyphenol)-Modified Electrode1

A gold electrode was modified with electropolymerized films of 4-methoxyphenol by its oxidative polymerization from an alkaline solution by cyclic voltammetry. The modified electrode was then used to determine epinephrine (EP) in the presence of a high concentration of ascorbic acid (AA) by differential pulse voltammetry. The peak positions as well as relative sensitivity EP/AA were affected by the potential window used for the polymerization. For polymerization between 0 and 1.3 V, the peak potentials recorded in a phosphate buffer solution (pH = 7.2) were 516 and 312 mV vs. Ag/AgCl for EP and AA, respectively. In addition the effects of pH and the type of electrolyte on the linearity range and detection limit are investigated. The detection limit for 3s-test is 0.1 M. The high selectivity and sensitivity for epinephrine was found to be due to charge discrimination/analyte accumulation.     

Application of Compton scattering normalization method to the analysis of uranium ore

Compton scattering normalization method is described for the analysis of uranium bearing ore respect to the usage of K X-rays of uranium. Minimum backscatter energy is obtained at a scatter angle of 180° with fixed point source geometry and collimation in appropriate conclusions. By normalizing the intensities of uranium K-lines to the Compton profile in the measured spectra, the results do not depend on several measuring parameters such as primary radiation intensity, matrix, composition, mass of the sample and measuring time. The method presented in this study indicates the convenience of uranium K-lines analysis for thick targets with an adequate measuring geometry.     

One-pot enantioselective formation of eight-membered rings from alkenyl Fischer carbene complexes and ketone enolates

Eight-membered carbocycles with up to five new stereogenic centers are enantioselectively obtained following a one-pot procedure that involves the coupling of three components: an alkenyl Fischer carbene complex, a ketone enolate, and allyl lithium.     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

Study on labeling conditions of125I-synkavit by the iodogen method

Labeling conditions of synkavit (2-methyl-1,4-naphthoquinol disodium phosphate) with iodine-125 have been studied. In this study, labeling temperature, reaction time, successive using of iodogen coated tubes, iodogen amount and synkavit concentrations have been determined to get optimum conditions for maximum labeling. Final results showed that when the labeling temperature, reaction time, synkavit concentration, and iodogen amount were, at room temperature, 15 min (in the case of successive using of three iodogen coated tubes), 2 mg ml^–1 and 5 mg, respectively; labeling yield was 90% and specific activities of the order of 555 GBq mmol^–1 (15 Ci mmol^–1) have been obtained.     

Radiometric titration based on colloidal and slow precipitate formation

Fluoride ions and, in about 0.005M concentration, tungstate ions form gelatinous precipitates, poorly soluble in water, with calcium ions. The radiometric determinations of the above ions are based on these reactions. Accurate radiometric determination can be carried out only if the gelatinous precipitate formed during titration can be properly separated from the solution. It has been found that in the case of fluoride ions the application of crystalline, easily filtrable Ca(COO)₂·H₂O or CaCO₃, and in the case of tungstate ions the application of CaWO₄ precipitate improves the filtration properties of⁴⁵CaF₂ and⁴⁵CaWO₄, respectively, formed during titration, whereby the radiometric determinations of the above ions become possible. Titrations were carried out with 0.05M and 0.005M CaCl₂ solutions, labelled with⁴⁵Ca.     

Gold(III) complexes with imidazole,benzoxazole, purine and pyrimidine derivatives

Summary The synthesis and characterization of Au^III complexes with several heterocyclic ligands are reported. The compounds have general formula [AuX₃(L)], where L =N-methylimidazole (N-MeIz),N-ethylimidazole (N-EtIz),N-propylimidazole (N-PrIz), benzoxazole (BO), 2-methylbenzoxazole (2-MeBO), 2,5-dimethylbenzoxazole (2,5-diMeBO), 2-amino-pyrimidine (2-APm), 4(6) -hydroxy-pyrimidine [4(6)-hydrPm] or hypoxanthine (Hypox) and X = Cl or Br. Elemental analysis, conductivity measurements and spectral studies were used for the characterization of the complexes. A square-planar geometry withN-bonded heterocyclic ligands is suggested.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

Analysis of aerosols at the bosporus bridge of Istanbul

Air samples collected at the second Bosporus bridge of Istanbul which carries a heavy traffic load between Asia and Europe, were analyzed for 22 elements by the INAA method. Pb, Cd and Fe concentrations in the samples were determined by AAS. Iron concentrations were used as a cross check between the two methods. In order to define the enrichment factors for the elements in the bridge area, a sample collected from our university campus which can be considered as a rural site, was also analyzed. Differences were observed especially for Br, Al, Mg, Ti, Cu and Na between the two sites. Based on the results of the samples from the bridge, we got a value of 0.58(16) for the Br/Pb-ratio.