An electrochemical sensor for dipyrone determination based on nickel-salen film modified electrode

An amperometric dipyrone sensor based on a polymeric nickel-salen (salen = N,N´-ethylenebis(salicydeneiminato)) film coated platinum electrode was developed. The sensor was constructed by electropolymerization of nickel-salen complex at a platinum electrode in acetonitrile/tetrabuthylamonium perchlorate by cyclic voltammetry. After cycling the modified electrode in a 0.50 mol L^-1 KCl solution, the estimated surface concentration was found to be equal to 1.29 x 10^-9 mol cm^-2. This is a typical behavior of an electrode surface immobilized with a redox couple that can usually be considered as a reversible single-electron reduction/oxidation of the nickel(II)/nickel(III) couple. A plot of the anodic current versus the dipyrone concentration for chronoamperometry (potential fixed = +0.50 V) at the sensor was linear in the 4.7 x 10^-6 to 1.1 x 10^-4 mol L^-1 concentration range and the concentration limit was 1.2 x 10^-6 mol L^-1. The proposed electrode is useful for the quality control and routine analysis of dipyrone in pharmaceutical formulations.     

Influence of Teflon® agglutinator on TLD spodumene pellets

The possibility of using different materials for thermoluminescent dosimetry agglutinating their powder with Teflon^® (a polymer) has been studied in recent years. In this paper the thermoluminescent properties of spodumene-Teflon^® composites were studied exposing them to different doses of a ⁶⁰Co radiation source, in comparison to the thermoluminescent properties of crystalline powder and of Teflon. The thermoluminescent emission curve of pure Teflon^® pellets showed two peaks at 200 and 250 °C at doses above 1 kGy, which may influence the dosimetry of high-doses that uses crystals agglutinated with this polymer. Preliminary results show that the Teflon^® causes an increased sensitivity in the TL signal of the pellet compared to the crystalline powder without the polymer, and that even the pure Teflon^® pellet is a material that can be exploited for high-doses dosimetry.     

Liquefying Flavonoids with Terpenoids through Deep Eutectic Solvent Formation

The formation of deep eutectic solvents (DES) is tied to negative deviations to ideality caused by the establishment of stronger interactions in the mixture than in the pure DES precursors. This work tested thymol and menthol as hydrogen bond donors when combined with different flavonoids. Negative deviations from ideality were observed upon mixing thymol with either flavone or flavanone, two parent flavonoids that only have hydrogen bond acceptor (HBA) groups, thus forming non-ionic DES (Type V). On the other hand, the menthol systems with the same compounds generally showed positive deviations from ideality. That was also the case with the mixtures containing the more complex hydroxylated flavonoid, hesperetin, which resulted in positive deviations when mixed with either thymol or menthol. COSMO-RS successfully predicted the behavior of the solid-liquid phase diagram of the studied systems, allowing for evaluation of the impact of the different contributions to the intermolecular interactions, and proving to be a good tool for the design of DES.     

Biodegradable Nanoparticles Loaded with Levodopa and Curcumin for Treatment of Parkinson’s Disease

Background: Parkinson’s disease (PD) is the second most common age-related neurodegenerative disorder. Levodopa (L-DOPA) remains the gold-standard drug available for treating PD. Curcumin has many pharmacological activities, including antioxidant, anti-inflammatory, antimicrobial, anti-amyloid, and antitumor properties. Copolymers composed of Poly (ethylene oxide) (PEO) and biodegradable polyesters such as Poly (ε-caprolactone) (PCL) can self-assemble into nanoparticles (NPs). This study describes the development of NH₂–PEO–PCL diblock copolymer positively charged and modified by adding glutathione (GSH) on the outer surface, resulting in a synergistic delivery of L-DOPA curcumin that would be able to pass the blood–brain barrier. Methods: The NH₂–PEO–PCL NPs suspensions were prepared by using a nanoprecipitation and solvent displacement method and coated with GSH. NPs were submitted to characterization assays. In order to ensure the bioavailability, Vero and PC12 cells were treated with various concentrations of the loaded and unloaded NPs to observe cytotoxicity. Results: NPs have successfully loaded L-DOPA and curcumin and were stable after freeze-drying, indicating advancing into in vitro toxicity testing. Vero and PC12 cells that were treated up to 72 h with various concentrations of L-DOPA and curcumin-loaded NP maintained high viability percentage, indicating that the NPs are biocompatible. Conclusions: NPs consisting of NH₂–PEO–PCL were characterized as potential formulations for brain delivery of L-DOPA and curcumin. The results also indicate that the developed biodegradable nanomicelles that were blood compatible presented low cytotoxicity.     

Pesticide residues in herbs and their transfer for infusions

In this work, a cost-effective gas chromatography-mass spectrometry method was validated for the analysis of twenty-five pesticide residues in herbs and infusions using a quick, easy, cheap, effective, rugged, and safe procedure or a dispersive liquid-liquid microextraction method, respectively. Figures of merit of the method showed good accordance with current guidelines. From the 58 herb samples studied (pertaining to 20 different species), 80% presented at least one detectable pesticide, with 62% of them above the maximum residual level. Results showed that pesticide residues from naturally contaminated herbs were not transferred at a significant rate to the herbal infusions. When a control assay was conducted by spiking a blank herb sample with a large amount of each pesticide (7 mg/L) 15 analytes were detected below the limit of quantification in the infusion.