Use of cetyltrimethylammonium bromide as surfactant for the determination of copper and chromium in gasoline emulsions by electrothermal atomic absorption spectrometry

In this work, the use of cetyltrimethylammonium bromide as surfactant for the preparation of oil-in-water emulsions for the determination of Cu and Cr in gasoline by electrothermal atomic absorption spectrometry (ET AAS) was evaluated. The surfactant amount was tested in the range of 25 to 300 mg, added to 2 ml of gasoline, and completed to 10 mL with 0.1% (v/v) nitric acid solution. 150 mg of surfactant was found optimum, and a sonication time of 10 min sufficient to form an oil-in-water emulsion that was stable for several hours. The ET AAS temperature program was established based on pyrolysis and atomization curves. The pyrolysis temperatures were set at 700 and 1300 °C for Cu and Cr, respectively and the selected atomization temperatures were 2400 and 2500 °C. The time and temperature of the drying stage and the atomization time were experimentally tested to provide optimum conditions. The limits of detection were found to be 5 μg L^− 1 and 1.5 μg L^− 1 for Cu and Cr, respectively in the original gasoline samples. The relative standard deviation (RSD) ranged from 4 to 9% in oil-in-water emulsions spiked with 5 μg L^− 1 and 15 μg L^− 1 of each metal, respectively. Recoveries varied from 90 to 98%. The accuracy of the proposed method was tested by an alternate procedure using complete evaporation of the gasoline sample. The method was adequate for the determination of Cu and Cr in gasoline samples collected from different gas stations in Salvador, BA, Brazil.     

Influence of trace elements supplementation on the production of recombinant frutalin by Pichia pastoris KM71H in fed-batch process

Frutalin, a galactose-specific lectin used to detect specific tumour markers, is a protein with low expression level in breadfruit. In the present study, fed-batch fermentation in a stirred tank bioreactor was used as a strategy to enhance protein production by a recombinant Pichia pastoris KM71H. By using this process, the production of recombinant frutalin was 4-fold higher than the value obtained in shaker flasks batch assays. Supplementation of the fermentation medium with trace elements (Pichia trace minerals, PTM) was also evaluated in order to stimulate production of the recombinant protein. The addition of PTM to the minimum medium afforded a recombinant protein production of 13.4 mg L^?1, which was 2.5-fold higher than that achieved from the culture medium without PTM supplementation. These results are significant as the development of strategies to improve the production of recombinant frutalin may broaden its application in cancer diagnosis.     

DIC Strain Measurements at the Micro-Scale in a Semi-Crystalline Polymer

To improve physical motivation of mechanical modeling for semi-crystalline polymers, a better understanding of micro-mechanisms and a quantification of the mechanical response at the microstructure scale are needed. Strain field evolutions during deformation would be useful information but experimental techniques are still lacking for these materials. In this paper, an in-situ Digital Image Correlation (DIC) technique in the Scanning Electron Microscope (SEM) was developed to access strain fields at the spherulitic scale of a polypropylene. The evolution of strain heterogeneities during deformation were analyzed and correlated to the microstructure.     

Theoretical analysis of all-optical clocked D flip-flop using a single SOA assisted symmetric MZI

A novel scheme for an all-optical clocked D flip-flop, with very low complexity, is proposed and numerically demonstrated. This new flip-flop configuration is based on a semiconductor optical amplifier — Mach–Zehnder interferometer (SOA-MZI), with a feedback loop, and presents two stable states determined by the phase shift between the two MZI arms.     

Synchronization and Non-Smooth Dynamical Systems

In this article we establish an interaction between non-smooth systems, geometric singular perturbation theory and synchronization phenomena. We find conditions for a non-smooth vector fields be locally synchronized. Moreover its regularization provide a singular perturbation problem with attracting critical manifold. We also state a result about the synchronization which occurs in the regularization of the fold-fold case. We restrict ourselves to the 3-dimensional systems (ℓ = 3) and consider the case known as a T-singularity.     

Babassu mesocarp (Orbignya phalerata Mart) nanoparticle-based biosensors for indirect sulfite detection in industrial juices

Journal of Solid State Electrochemistry - The present work proposes a new electrochemical sulfite biosensor based on babassu mesocarp nanoparticles (BMNPs) immobilized on the surface of a pyrolytic...