Floating resistivity detector for microchip electrophoresis

A newly developed conductivity detector, the floating resistivity detector (FRD), for microchip electrophoresis was introduced in this work. The detector design permits decoupling of the detection circuit from the high separation voltage without compromising separation efficiency. This greatly simplifies the integration of microchip electrophoresis systems. Its method of detection relies on platinum electrodes being dipped in two buffer-filled branched detection probe reservoirs on the microchip device. In this way, analytes passing through the detection window will not pass through and subsequently adsorb onto the electrodes, alleviating problems of electrode fouling due to analyte contamination and surface reactions. A customized microchip design was proposed and optimized stepwise for the new FRD system. Each branched detection probe was determined to be 4.50 mm long with a 0.075 mm detection window gap between them. The distance between the detection window and buffer waste reservoir was determined to be 1.50 mm. The optimized microchip design was subsequently used in the analysis of four groups of analytes - inorganic cations, amino acids, aminoglycosides antibiotics, and biomarkers. Based on the preliminary results obtained, the detection limits were in the range of 0.4-0.7 mg/L for the inorganic cations and 1.5-15 mg/L for the amino compounds.     

Rapid identification of purified enteropathogenic Escherichia coli by microchip electrophoresis

In this work, the potential of PDMS-based microchip electrophoresis in the identifications and characterizations of microorganism was evaluated. Enteropathogenic E. coli (EPEC) was selected as the model microorganism. In this study, separation parameters such as applied voltage, concentrations of buffer and buffer modifier, injection voltage, and duration of injection had been investigated and optimized. Determination of EPEC bacteria could be completed within 2 min with good reproducibility. RSDs were less than 0.5 and 5% in migration time and peak area, respectively. Separation efficiency corresponding to plate number of more than 100,000 was achieved. In order to obtain reproducible separations, sample pretreatment was found to be essential. Microchip electrophoresis with LIF detection could potentially revolutionize certain aspects of microbiology involving diagnosis, profiling of pathogens, environmental analysis, and many other areas of study.     

A 3-D dielectrophoretic filter chip

The paper presents a 3-D filter chip employing both mechanical and dielectrophoretic (DEP) filtration, and its corresponding microfabrication techniques. The device structure is similar to a classical capacitor: two planar electrodes, made from a stainless steel mesh, and bonded on both sides of a glass frame filled with round silica beads. The solution with the suspension of particles flows through both the mesh-electrodes and silica beads filter. The top stainless steel mesh (with openings of 60 mum and wires of 30 mum-thickness) provides the first stage of filtration based on mechanical trapping. A second level of filtration is based on DEP by using the nonuniformities of the electric field generated in the capacitor due to the nonuniformities of the dielectric medium. The filter can work also with DC and AC electric fields. The device was tested with yeast cells (Saccharomyces cerevisae) and achieved a maximal trapping efficiency of 75% at an applied AC voltage of 200 V and a flow rate of 0.1 mL/min, from an initial concentration of cells of 5 x 10(5) cells/mL. When the applied frequency was varieted in the range between 20 and 200 kHz, a minimal value of capture efficiency (3%) was notticed at 50 kHz, when yeast cells exhibit negative DEP and the cells are repelled in the space between the beads.     

Anti-Fungal Hevein-like Peptides Biosynthesized from Quinoa Cleavable Hololectins

Chitin-binding hevein-like peptides (CB-HLPs) belong to a family of cysteine-rich peptides that play important roles in plant stress and defense mechanisms. CB-HLPs are ribosomally synthesized peptides that are known to be bioprocessed from the following two types of three-domain CB-HLP precursor architectures: cargo-carrying and non-cargo-carrying. Here, we report the identification and characterization of chenotides biosynthesized from the third type of precursors, which are cleavable hololectins of the quinoa (Chenopodium quinoa) family. Chenotides are 6-Cys-CB-HLPs of 29–31 amino acids, which have a third type of precursor architecture that encompasses a canonical chitin-binding domain that is involved in chitin binding and anti-fungal activities. Microbroth dilution assays and microscopic analyses showed that chenotides are effective against phyto-pathogenic fungi in the micromolar range. Structure determination revealed that chenotides are cystine knotted and highly compact, which could confer resistance against heat and proteolytic degradation. Importantly, chenotides are connected by a novel 18-residue Gly/Ala-rich linker that is a target for bioprocessing by cathepsin-like endopeptidases. Taken together, our findings reveal that chenotides are a new family of CB-HLPs from quinoa that are synthesized as a single multi-modular unit and bioprocessed to yield individual mature CB-HLPs. Importantly, such precursors constitute a new family of cleavable hololectins. This unusual feature could increase the biosynthetic efficiency of anti-fungal CB-HLPs, to provide an evolutionary advantage for plant survival and reproduction.     

Two wavelength simultaneous DSPI and DSP for 3D displacement field measurements

A novel optical system is proposed that implements digital speckle pattern interferometry (DSPI) and digital speckle photography (DSP) simultaneously using two wavelength illumination of an object for simultaneous measurement of all three components of the displacement vector field. A collimated red light illuminates both the object and a reference surface in a DSPI configuration which is sensitive to out-of-plane displacement field while a blue light illuminates the object in a DSP configuration which is sensitive to in-plane displacement fields. A color 3-CCD camera records the red and blue lights individually through its red and blue channels, respectively. Two reference images and one image in the deformed state of the object are required for quantitative measurement. Experimental results are presented to validate the system.     

Rechargeable battery using a novel iron oxide nanorods anode and a nickel hydroxide cathode in an aqueous electrolyte

A rechargeable battery using novel α-Fe(2)O(3)/CNFs composite as the anode, β-Ni(OH)(2) as the cathode and LiOH/KOH solution as the electrolyte in an aqueous rechargeable battery has been proposed. The Fe(2)O(3)/Ni(OH)(2) prototype cell exhibits a high average operational voltage of 1.5 V, high rate capability and good cycling performance.     

Analysis of non-symmetrical flapping airfoils

Simulations have been done to assess the lift, thrust and propulsive efficiency of different types of non-symmetrical airfoils under different flapping configurations. The variables involved are reduced frequency, Strouhal number, pitch amplitude and phase angle. In order to analyze the variables more efficiently, the design of experiments using the response surface methodology is applied. Results show that both the variables and shape of the airfoil have a profound effect on the lift, thrust, and efficiency. By using non- symmetrical airfoils, average lift coefficient as high as 2.23 can be obtained. The average thrust coefficient and efficiency also reach high values of 2.53 and 0.61, respectively. The lift production is highly dependent on the airfoil＇s shape while thrust production is influenced more heavily by the variables. Efficiency falls somewhere in between. Two-factor interac- tions are found to exist among the variables. This shows that it is not sufficient to analyze each variable individually. Vorticity diagrams are analyzed to explain the results obtained. Overall, the S1020 airfoil is able to provide relatively good efficiency and at the same time generate high thrust and lift force. These results aid in the design of a better ornithopter＇s wing.     

Numerical reconstruction in in-line digital holography by translation of CCD position and gradient operator method

We propose an approach based on axial translation of a charge-coupled device (CCD) and gradient operator method for numerical reconstruction in in-line digital holography. The object wave in the hologram (or CCD) plane is determined using one position translation of CCD, and a phase-shifting device can be fully avoided. Gradient operator method is further applied to detect the focal plane of an object, and the object wave is reconstructed by an angular spectrum algorithm with the detected focal distance. The feasibility and effectiveness of the proposed method are demonstrated by numerical simulations.     

Synthesis of carbon nitride films by direct current plasma assisted pulsed laser deposition

Carbon nitride films were deposited by pulsed laser ablation of a graphite target under a nitrogen atmosphere at room temperature. A direct current discharge apparatus was used to supply active nitrogen species during the deposition of carbon nitride films. The composition and bonding structure of carbon nitride films were determined by Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy. The incorporation of nitrogen atoms in the films is greatly improved by the using of a dc glow discharge. The ratio N/C can reach 0.34 at the discharge voltage of 400 V. Six peaks centered at 1025 cm^-1, 1226 cm^-1, 1381 cm^-1, 1534 cm^-1, 1629 cm^-1, and 2200 cm^-1 can be clearly distinguished from the FTIR spectra of the deposited films, which indicates the existence of C–N, C=N, and C≡N bonds. The fraction of sp² C, C≡N bonds, and C=N bonds in the deposited films increases with increasing discharge voltage. Deconvolution results of C 1s and N 1s spectra also indicate that nitrogen atoms in the films are chemically bonded to sp¹ C, sp² C, and sp³ C atoms. Most of the nitrogen atoms are bonded to sp² C atoms. Increasing the discharge voltage leads to a decrease of the fraction of nitrogen atoms bonded to sp² C and the fraction of amorphous carbon; however, it leads to an increase of the fraction of nitrogen atoms bonded to sp³ C and the fraction of sp² C and sp³ C atoms bonded to nitrogen atoms. Received: 7 June 2000 / Accepted: 19 February 2001 / Published online: 27 June 2001