Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.     

Adsorption behavior of VII group elements on tertiary pyridine resin in hydrochloric acid solution

We investigated the adsorption behaviors of technetium and rhenium on tertiary pyridine resin in hydrochloric acid solution. Technetium has a little larger distribution coefficient in higher concentration of hydrochloric acid region than rhenium. However, the tendency of adsorption behavior of technetium and rhenium is similar. We concluded that the rhenium can be used as the substitute for technetium. Adsorption behaviors of platinum group elements were also investigated. The separation of technetium from platinum group elements is discussed.     

An application of fragment interaction analysis based on local MP2

We have developed a method named ‘fragment interaction analysis based on local MP2’ (abbreviated as FILM). This method enables us to decompose the interaction energy associated with dispersion interactions into contributions of localized occupied orbitals. In this study, the basis set dependence of the results derived from FILM was examined. The results suggested that the individual ratio of pair correlation energies of selected orbital pairs to the total dispersion interaction was almost independent of the basis set size. As an illustrative example, detailed analysis was performed on the human immunodeficiency virus type 1 protease complexed with lopinavir molecule.     

Oxidative degradation of poly(isophthaloylhydrazine‐1,2‐diyl)s

The condensation polymerization of isophthalodihydrazide and diphenyl isophthalate affords poly(isophthaloylhydrazine‐1,2‐diyl). High‐molecular‐weight poly(5‐tert‐butylisophthaloylhydrazine‐1,2‐diyl) is prepared by the polycondensation of 5‐tert‐butylisophthalodihydrazide and bis(4‐nitrophenyl) 5‐tert‐butylisophthalate in NMP at 100 °C. T_d of the poly(diacylhydrazine) is observed above 300 °C. No T_g is observed below T_d. The high‐molecular‐weight poly(diacylhydrazine) exhibits a film‐forming ability. The poly(diacylhydrazine) decomposes on treatment with an oxidant such as sodium hypochlorite solution to obtain the corresponding carboxylic acid and nitrogen. However, poly(diacylhydrazine) was stable to oxygen and hydrogen peroxide even in the presence of transition metal ions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6255–6262, 2008     

An Accurate Characterization of CRT Monitor (I) Verifications of Past Studies and Clarifications of Gamma

CRT monitors are widely used to view images on the Internet. The color images on the computer graphic display can be printed out or displayed on other monitors through the Internet, and color matching between the original and the reproduction is very important. The color management systems (CMSs) are useful for the color matching. CMSs utilize device profiles, in which color characteristic information is stored, and these profiles are generated by device characterization. Thus, an accurate characterization of the monitor is essential for better color matching. CRT monitor characteristics can be described by the tone reproduction curves (TRCs) of each channel, and color additive matrix. In this paper, these characteristics were investigated from a physical point of view. Various kinds of flare and the interdependence among the channels were also investigated and verified. The definition of the term “gamma” is clarified, which is very often used to describe the TRC. Various definitions are compared and a new definition of S-γ is proposed.     

Estimating the covariance matrix and the generalized variance under a symmetric loss

For estimating the power of a generalized variance under a multivariate normal distribution with unknown means, the inadmissibility of the best affine equivariant estimator relative to the symmetric loss is shown, and a class of improved estimators is given. The problem of estimating the covariance matrix is also discussed.     

Preparation of anisotropic silica nanoparticles via controlled assembly of presynthesized spherical seeds

A facile solution process for the preparation of anisotropic silica nanoparticles (ASNPs) is presented. ASNPs are prepared via controlled self-assembly of spherical silica seeds (22 nm) in alcohol-water mixed media, followed by their in situ fixation and overgrowth with tetraethoxysilane (TEOS). Ethanol and L-arginine (Arg) are used to modify the dielectric constant and ionic strength of the reaction media, by which seed assembly is controlled through the adjustment of electrostatic interaction. Ethanol and Arg also serve as a cosolvent and a catalyst for hydrolysis and condensation of TEOS, respectively, which enables us to produce ASNPs in a simple one-pot process. In addition to ASNPs with wormlike structures, different kinds of NPs (bimodal spherical NPs, monodisperse spherical NPs, and spherical aggregates) have also been obtained by changing the concentrations of ethanol and Arg. The length, thickness, or both of ASNPs are controlled systematically by varying the concentrations of Arg, seed NPs, and TEOS. Other alcoholic cosolvents, such as methanol, 1-propanol, 2-propanol, and t-butanol, are also effective to give ASNPs when the dielectric constant of the alcohol-water mixed media is properly adjusted, showing the versatility of the present method.     

Platinum Nanoflowers on Scratched Silicon by Galvanic Displacement for an Effective SALDI Substrate

We report a new and facile method for synthesizing 3D platinum nanoflowers (Pt Nfs) on a scratched silicon substrate by electroless galvanic displacement and discuss the applications of the Pt Nfs in surface‐assisted laser desorption/ionization‐mass spectrometry (SALDI‐MS). Surface scratching of n‐type silicon is essential to induce Pt Nf growth on a silicon substrate (to obtain a Pt Nf silicon hybrid plate) by the galvanic displacement reaction. The Pt Nf silicon hybrid plate showed excellent SALDI activity in terms of the efficient generation of protonated molecular ions in the absence of a citrate buffer. We propose that the acidity of the Si? OH moieties on silicon increases because of the electron‐withdrawing nature of the Pt Nfs; hence, proton transfer from the Si? OH groups to the analyte molecules is enhanced, and finally, thermal desorption of the analyte ions from the surface occurs. Signal enhancement was observed for protonated molecular ions produced from a titania nanotube array (TNA) substrate on which Pt nanoparticles had been photochemically deposited. Moreover, surface modification of the Pt Nf silicon hybrid plate by perfluorodecyltrichlorosilane (FDTS) (to obtain an FDTS‐Pt Nf silicon hybrid plate) was found to facilitate soft SALDI of labile compounds. More interestingly, the FDTS‐Pt Nf silicon hybrid plate acts 1) as a high‐affinity substrate for phosphopeptides and 2) as a SALDI substrate. The feasibility of using the FDTS‐Pt Nf silicon hybrid plate for SALDI‐MS has been demonstrated by using a β‐casein digest and various analytes, including small molecules, peptides, phosphopeptides, phospholipids, carbohydrates, and synthetic polymers. The hybridization of Pt Nfs with a scratched silicon substrate has been found to be important for achieving excellent SALDI activity.