Validity of retinal oxygen saturation analysis: Hyperspectral imaging in visible wavelength with fundus camera and liquid crystal wavelength tunable filter

The purpose of this paper was to investigate the feasibility of a newly developed hyperspectral fundus imaging camera with a liquid crystal tunable filter. The intensities of different wavelengths of light transmitted through an artery, vein, and the area surrounding these vessels and reflected out were measured, and the differential spectral absorptions were analyzed. Measurements were made from 16 normal eyes and from two artificial capillaries. The ratios of absorption (ROA) of arteries to veins from 500 to 580 nm (range 1) and from 600 to 720 nm (range 2) were calculated. For all eyes, the ROA_range1 was larger than ROA_range2. The ROA obtained from the artificial capillary filled with blood saturated with oxygen or nitrogen was similar to that of simulated data of oxy- and deoxyhemoglobin extinction rate. Most ROAs of human eyes were lower than those of the simulated data and the artificial capillaries. Oxygen saturation analysis by hyperspectral fundus imaging of retinal vessels were qualitatively in agreement with thein vitro analysis or simulated values. However, further improvements are necessary to evaluate the oxygen saturation quantitatively in the retinal blood vessels.     

Quantification of ATRP initiator density on polymer latex particles by fluorescence labeling technique using copper‐catalyzed azide‐alkyne cycloaddition

We developed a novel fluorescence labeling technique for quantification of surface densities of atom transfer radical polymerization (ATRP) initiators on polymer particles. The cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) polymer latex particles carrying ATRP‐initiating chlorine groups were prepared by emulsifier‐free emulsion polymerization of styrene (St), 2‐(2‐chloropropionyloxy)ethyl methacrylate (CPEM), and N‐n‐butyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonium bromide (C₄DMAEMA). ATRP initiators on the surface of polymer particles were converted into azide groups by sodium azide, followed by fluorescent labeling with 5‐(N,N‐dimethylamino)‐N′‐(prop‐2‐yn‐1‐yl)naphthalene‐1‐sulfonamide (Dansyl‐alkyne) by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The reaction time required for both azidation of ATRP‐initiating groups and successive fluorescence labeling of azide groups with Dansyl‐alkyne by CuAAC were investigated in detail by FTIR and fluorescence spectral measurement, respectively. The ATRP initiator densities on the cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) particle surfaces were estimated to be 0.21 and 0.15 molecules nm^?2, respectively, which gave close agreement with values previously determined by a conductometric titration method. The fluorescence labeling through click chemistry proposed herein is a versatile technique to quantify the surface ATRP initiator density both on anionic and cationic polymer particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4042–4051     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

Substitution of both chloro and sulfinyl groups of aryl 1-chlorocyclopropyl sulfoxides in one-pot via cyclopropylmagnesium carbenoids: a synthesis of multi-substituted cyclopropanes

The rearrangement of cyclopropylmagnesium carbenoids, which were generated from aryl 1-chlorocyclopropyl sulfoxides with a Grignard reagent, to allenes was found to be suppressed by adding HMPA as an additive. Alkylation of the cyclopropylmagnesium carbenoids with the Grignard reagent gives mainly alkylated cyclopropylmagnesium chloride instead. The cyclopropylmagnesium chloride intermediate can be trapped with several electrophiles to afford multi-substituted cyclopropanes. This procedure provides a new method for a synthesis of multi-substituted cyclopropanes.     

On the Cauchy problem for non-effectively hyperbolic operators,the Gevrey 5 well-posedness

In this paper, we prove that for non-effectively hyperbolic operators with smooth double characteristics exhibiting a Jordan block of size 4 on the double manifold, the Cauchy problem is well-posed in the Gevrey 5 class, beyond the generic Gevrey class 2 (see, e.g., [5]). Moreover, we show that this value is optimal, due to certain geometric constraints on the Hamiltonian flow of the principal symbol. These results, together with results already proved, give a complete picture of the well-posedness of the Cauchy problem around hyperbolic double characteristics.     

Synthesis and spectroscopic investigation of π‐conjugated (E)‐enyne polycarbazole with different organo‐metallic catalysts from 3,6‐diethynyl‐9‐(2‐ethylhexyl)carbazole

In the present study, a new (E)‐rich‐enyne π‐conjugated polymer containing a carbazole was designed and synthesized. Two different synthesis methods of poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene‐(E)‐vinylene] (PCZEV) have been prepared from 3,6‐diethynyl‐9(2‐ethylhexyl)carbazole by using the palladium‐carbene‐catalyzed reaction and/or by using the organolanthanide‐catalyzed reaction leading to well‐defined polymer, and their general properties were studied. Compared to poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene] (PCE), the UV‐vis absorption and photoluminescence of the PCZEV was red‐shifted, which indicates the extension of conjugation length. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2434–2442, 2009     

A travelling-wave beam deflector cleave-coupled to a diode laser

A new technique for scanning a diode laser beam is introduced where the beam is deflected in a current-injection-type travelling-wave beam deflector integrated with a diode laser. The deflector, which is formed outside the laser cavity, is cleave-coupled to the cavity. An anti-reflection coating on the deflector output facet suppresses the light returning to the laser. As a result, very smooth deflection of the radiation peak with low background intensity is realized in this device, while retaining high efficiency and low threshold current.