Transition between internal transport barriers with different temperature-profile curvatures in JT-60U Tokamak plasmas

A spontaneous transition phenomena between two states of a plasma with an internal transport barrier (ITB) is observed in the steady-state phase of the magnetic shear in the negative magnetic shear plasma in the JT-60U tokamak. These two ITB states are characterized by different profiles of the second radial derivative of the ion temperature inside the ITB region (one has a weak concave shape and the other has a strong convex shape) and by different degrees of sharpness of the interfaces between the L mode and the ITB region, which is determined by the turbulence penetration into the ITB region.     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Validity of retinal oxygen saturation analysis: Hyperspectral imaging in visible wavelength with fundus camera and liquid crystal wavelength tunable filter

The purpose of this paper was to investigate the feasibility of a newly developed hyperspectral fundus imaging camera with a liquid crystal tunable filter. The intensities of different wavelengths of light transmitted through an artery, vein, and the area surrounding these vessels and reflected out were measured, and the differential spectral absorptions were analyzed. Measurements were made from 16 normal eyes and from two artificial capillaries. The ratios of absorption (ROA) of arteries to veins from 500 to 580 nm (range 1) and from 600 to 720 nm (range 2) were calculated. For all eyes, the ROA_range1 was larger than ROA_range2. The ROA obtained from the artificial capillary filled with blood saturated with oxygen or nitrogen was similar to that of simulated data of oxy- and deoxyhemoglobin extinction rate. Most ROAs of human eyes were lower than those of the simulated data and the artificial capillaries. Oxygen saturation analysis by hyperspectral fundus imaging of retinal vessels were qualitatively in agreement with thein vitro analysis or simulated values. However, further improvements are necessary to evaluate the oxygen saturation quantitatively in the retinal blood vessels.     

Numerical analysis of dipole sound source around high speed trains

As the maximum speed of high speed trains increases, the effect of aeroacoustic noise on the sound level on the ground becomes increasingly important. In this paper, the distribution of dipole sound sources at the bogie section of high speed trains is predicted numerically. The three-dimensional unsteady flow around a train is solved by the large eddy simulation technique. The time history of vortices shows that unstable shear layer separation at the leading edge of the bogie section sheds vortices periodically. These vortices travel downstream while growing to finally impinge upon the trailing edge of the section. The wavelength of sound produced by these vortices is large compared to the representative length of the bogie section, so that the source region can be regarded as acoustically compact. Thus a compact Green's function adapted to the shape can be used to determine the sound. By coupling the instantaneous flow properties with the compact Green's function, the distribution of dipole sources is obtained. The results reveal a strong dipole source at the trailing edge of the bogie section where the shape changes greatly and the variation of flow with time is also great. On the other hand, the bottom of the bogie section where the shape does not change, or the leading edge and boundary layer where the variation of flow with time is small, cannot generate a strong dipole source.     

New microporous coordination polymer affording guest-coordination sites at channel walls

Utilization of a metalloligand, ([Cu(2,4-pydca)2(H2O)].2Et3NH) (1) (2,4-pydca = pyridine-2,4-dicarboxylate), as a building unit provides a novel porous coordination polymer, ([ZnCu(2,4-pydca)2(H2O)3(DMF)].DMF)n (2), in which the Zn(II) ion at the node of the network acts as a linker and the Cu(II) ion in the channel wall is available for guest-coordination.     

A novel synthesis of (E)-3,7-dimethyl-2-octene-1,8-diol secreted by the african monarch using the ring-opening reaction of α-methyl-β-propiolactone

The regioselective ring-opening reaction of α-methyl-β-propiolactone with 3,3-ethylene-dioxybutylmagnesium bromide in the presence of copper(I) catalyst afforded 2-methyl-6-oxoheptanoic acid, which was easily converted into (E)-3,7-dimethyl-2-2-octene-1,8-diol in good yield.     

Preparation of Na+-selective electrodes by ion-implantation of lithium and silicon into single-crystal alumina wafer and its application to the production of ISFET

Summary Sodium ion-selective electrodes (Na⁺-ISE) were prepared by implanting Si⁺ and Li⁺ into alumina wafers and their characteristics were investigated. The alumina wafer had a thickness of 100 m and a diameter of 1.40 cm. The ionselective membrane was produced by ion-implanting of Li⁺ and Si⁺ on both sides of a single-crystal alumina wafer. The total doses of Li⁺ and Si⁺ were controlled to be the same, viz. 10¹³–10¹⁵ ions/cm². The ion-implanted alumina wafer with 10¹⁴ or 4×10¹⁴ ions/cm² of Li⁺ and Si⁺ showed better characteristics than the others.The response curves of the 10¹⁴ ions/cm² implanted alumina wafer had a slope of 42 mV/pNa in a concentration range from 1–10^–4mol/l. The full response achieved after about 1 min was reproducible. The proposed idea of producing Na⁺-ISE by ion-implantation technique was applied to functuate the gate surface of the field effect transitor to sodium ion. The sodium ion-sensitive FET (Na⁺-ISFET) prepared by implanting Li⁺ and Al⁺ at a dose of 5×10¹⁴ ions/cm² showed a slope of 30 mV/pNa in a concentration range from 1–10^–4mol/l.

---

Herstellung Na⁺-ionenselektiver Elektroden durch Einbau von Lithium und Silicium in Einkristall-Alumniumoxidblättchen und Anwendung zur Erzeugung von ISFET

Zusammenfassung Na⁺-selektive Elektroden wurden durch Einbau von Si⁺ und Li⁺ in Aluminiumoxidblättchen hergestellt und ihre Charakteristiken untersucht. Die Blättchen hatten eine Dicke von 100 m und einen Durchmesser von 1,40 cm. Ebenso wurde die Membran für einen ISFET hergestellt. Die Gesamtmenge von Li⁺ und Si⁺ wurde auf 10¹³–10¹⁵ Ionen/cm² eingestellt, wobei sich bei 10¹⁴ oder 4×10¹⁴ Ionen/cm² die beste Charakteristik ergab.Die Responsekurven der mit 10¹⁴ Ionen/cm² versehenen Aluminiumoxidplättchen hatten eine Neigung von 42 mV/pNa in einem Konzentrationsbereich von 1–10^–4mol/l. Der nach 1 min erhaltene volle Response war reproduzierbar. Die vorgeschlagene Technik wurde zur Einstellung der Gate-Oberfläche des Feldeffekt-Transistors auf Natriumion benutzt. Der Na⁺-sensitive FET (Na⁺-ISFET), der durch Einbau von Li⁺ und Al⁺ mit 5×10¹⁴ Ionen/cm² hergestellt wurde, zeigte eine Neigung der Signalkurve von 30 mV/pNa in einem Bereich von 1–10^–4mol/l.

     

QUANTUM EFFICIENCY FOR THE PHOTOCONVERSION OF BACTERIORHODOPSIN AT VERY LOW TEMPERATURES

Abstract— Quantum efficiencies for photoconversion of bacteriorhodopsin (trans-bR) to a bathochromic product (batho-bR^t) and its photoreversion in purple membrane at 77 and 9 K were investigated with low temperature spectrophotometry. The kinetics of the photoconversion and its photoreversion cannot be expressed by a single exponential curve. The photoconversions at 77 and 9 K showed the same slope in the early stage. The kinetics of the photoreversions were identical at the two temperatures. These results indicate that the quantum efficiencies for the conversion of trans-bR to batho-bR^t or for its photoreversion are identical at the two temperatures.
The fact that the photoreversion cannot be expressed by a single exponential curve suggests the existence of several conformational states of batho-bR^t due to the trimer structure of the purple membrane.