Thermal analysis of heat-treated silver fir wood and larval frass

Glasses having composition 5Li₂O–5ZnO– xBi₂O₃ –(90 ? x) P₂O₅ (x = 5, 10, 15, 20 and 25 mol%) were prepared by the normal melt quenching technique. Nanocomposite glass containing bismuth phosphate BiPO₄ nanocrystals was obtained, which can be attributed to homogeneous nucleation process. The formation of BiPO₄ nanocrystals was confirmed and characterized by X-ray diffraction patterns (XRD), transmission electron microscopy (TEM), differential scanning calorimetry, optical absorption (UV–Vis) and micro-hardness studies. The morphological analysis by XRD and TEM microscopy showed the formation of hexagonal BiPO₄ nanocrystals, and its estimated nanocrystalline sizes were found to be varying from 5.35 to 11.53 nm depending on the Bi₂O₃ concentrations. The density (ρ) and molar volume (V _m) were also determined and found to be in compositional dependence. Glass transition temperature (T _g) and glass crystallization temperature (T _c) were obtained and found to be increased (from 240.0 to 337.2 °C) with increasing Bi₂O₃ up to 20 mol% and then decreased (from 337.2 to 331.8 °C) due to the structural changes in the glass network. Effect of BiPO₄ content on the optical properties had been investigated. From the UV–Vis spectra, it was observed that the fundamental absorption edge shifts toward lower wavelengths, i.e., blueshifts with increasing Bi₂O₃ mol% up to 20 mol%, and then shifts toward higher wavelengths, i.e., redshifts beyond 20 mol%. It was also observed that the obtained E _opt (for indirect and direct transitions) increases with gradual increase in Bi₂O₃ content up to 20 mol% and then decreases beyond 20 mol%. This may be due to the introduction of Bi cations into the glass network as a network former up to 20 mol% causing a decrease in ΔE values, beyond 20 mol%, the introduction of Bi ions into the glass network interstitially leads to increase the values of ΔE. The optical properties of the present nanocrystallized glasses showed a quantum size dependence, in which the optical band gap energy (E _opt) was changed as a function of BiPO₄ nanocrystalline sizes.     

Na3V2(PO4)3/C/Ag nanocomposite materials for Na-ion batteries obtained by the modified Pechini method

Journal of Solid State Electrochemistry - Nanocomposite materials, Na3V2(PO4)3/C and Na3V2(PO4)3/C/Ag, were synthesized by a modified Pechini method. Their properties were characterized with the...     

Terahertz split-ring metamaterials as transducers for chemical sensors based on conducting polymers: a feasibility study with sensing of acidic and basic gases using polyaniline chemosensitive layer

We report on the first application of terahertz metamaterials acting as transducers for chemical sensors based on conducting polymers. In our feasibility study aimed at sensing of gaseous hydrochloric and ammonia, a two-dimensional sensor metamaterial consisting of an array of split-ring resonators on the surface of undoped silicon wafer was prepared. The surface of the resonator was coated with a 150-μm layer of polyaniline. Binding of hydrogen chloride to polyaniline leads to distinct changes in the resonance frequency of the metamaterial. Measurements can be performed both in the reflection and transmission mode. A numerical simulation of the response revealed an increase of both the real and the imaginary components of the dielectric function of the polyaniline film. These changes are attributed to the transition from emaraldine base to emeraldine salt. The results demonstrate a new approach for formation of highly sensitive transducers for chemical sensors.

?     

Biochemical fractionation and cellular distribution of americium and plutonium in the biomass of freshwater macrophytes

Accumulation of americium (²⁴¹Am) and plutonium (^238,242Pu) and their distribution in cell compartments and biochemical components of the biomass of freshwater aquatic plants Elodea canadensis, Ceratophyllum demersum and Myrioplyllum spicatum and aquatic moss Fontinalis antipyretica have been investigated in laboratory experiments. Americium and plutonium taken up from water by Elodea canadensis apical shoots were mainly absorbed by structural components of plant cells (90% for ²⁴¹Am; 89% for ²³⁸Pu and 82–87% for ²⁴²Pu). About 10–18% of isotope activity was recorded in the cytosol fraction. The major concentration (76–92%) of americium was bound to cell wall cellulose-like polysaccharides of Elodea canadensis, Myriophyllum spicatum, Ceratophyllum demersum and Fontinalis antipyretica, 8–24% of americium activity was registered in the fraction of proteins and carbohydrates, and just a minor concentration (<1%) in the lipid fraction. The distribution of plutonium in the biomass fractions of Elodea was similar to that of americium. Hence, americium and plutonium had the highest affinity to cellulose-like polysaccharides of cell walls of freshwater submerged macrophytes.     

Conformational energetics of interpolyelectrolyte complexation between ι-carrageenan and poly(methylaminophosphazene) measured by high-sensitivity differential scanning calorimetry

The interaction of poly(methylaminophosphazene) hydrochloride (PMAP·HCl) of varying degrees of ionization (f) with the potassium salt of ι-carrageenan was studied by high-sensitivity differential scanning calorimetry at a KCl concentration of 0.15 M, which is included for the purpose of stabilizing the helix conformation of the polysaccharide up to 55 °C. The conditions of strong (pH 3.8, I = 0.15), moderate (pH 7.4, I = 0.15), and weak (pH 7.4, I = 0.25) electrostatic interactions of the polyelectrolytes were considered. The thermodynamic parameters of the helix-coil transition of ι-carrageenan were determined as a function of the polycation/polyanion ratio. We show that the interpolyelectrolyte reaction between PMAP·HCl and ι-carrageenan results in a complete unfolding of the polysaccharide helix under conditions of strong electrostatic interaction and increases its stability under conditions of medium and weak electrostatic interactions. The formation of stoichiometric PMAP-carrageenan interpolyelectrolyte complexes proceeded via a cooperative mechanism at pH 3.8 (f = 0.5) and pH 7.4 (f = 0.2) at an ionic strength of 0.15. In contrast, the complexation at pH 7.4 and an ionic strength of 0.25 could be considered to be a consecutive competitive binding of charged units of poly(methylaminophosphazene) to the oppositely charged polysaccharide matrix in the helix or coil conformation. Binding constants of the polycation to the helix and coil forms of ι-carrageenan were estimated. They revealed a preferential binding of the polycation to the helix form of the polysaccharide.     

Radial tetra(ferrocenyl)- and tetra(cymantrenyl)cyclobutadienecobalt complexes: Synthesis and structures

Novel radial tetra(ferrocenyl)- and tetra(cymantrenyl)cyclobutadienecobalt complexes were prepared by metal carbonyls free protocol of [2 + 2] cycloaddition reaction of 1,2-diferrocenyl- or 1,2-dicymantrenylethynes with chlorotris(triphenylphospine)cobalt(I) and carboethoxycyclopentadienide sodium with good yields. The molecular structure of these products was confirmed with X-ray analysis, and their electrochemical behavior was studied.     

Correction factors for boundary diffusion in reaction-diffusion master equations

The reaction-diffusion master equation (RDME) has been widely used to model stochastic chemical kinetics in space and time. In recent years, RDME-based trajectorial approaches have become increasingly popular. They have been shown to capture spatial detail at moderate computational costs, as compared to fully resolved particle-based methods. However, finding an appropriate choice for the discretization length scale is essential for building a reasonable RDME model. Moreover, it has been recently shown [R. Erban and S. J. Chapman, Phys. Biol. 4, 16 (2007); R. Erban and S. J. Chapman, Phys. Biol. 6, 46001 (2009); D. Fange, O. G. Berg, P. Sjo?berg, and J. Elf, Proc. Natl. Acad. Sci. U.S.A. 107, 46 (2010)] that the reaction rates commonly used in RDMEs have to be carefully reassessed when considering reactive boundary conditions or binary reactions, in order to avoid inaccurate--and possibly unphysical--results. In this paper, we present an alternative approach for deriving correction factors in RDME models with reactive or semi-permeable boundaries. Such a correction factor is obtained by solving a closed set of equations based on the moments at steady state, as opposed to modifying probabilities for absorption or reflection. Lastly, we briefly discuss existing correction mechanisms for bimolecular reaction rates both in the limit of fast and slow diffusion, and argue why our method could also be applied for such purpose.     

Calcium‐Selective Electrodes for Measurements in the Presence of Anionic Surfactants

Calcium selective electrodes with various membrane formulations were studied in solutions containing CaCl₂ and sodium dodecylsulfate (NaDS). It is shown that electrodes based on neutral ionophores ETH 1001 and ETH 129 cannot be used as Ca²⁺ ion sensors in these solutions because of strong anion interference from DS^? anion. Among other formulations, that based on calcium bis(tetramethylbutylphenyl)phosphate in tri(2‐ethylhexyl)phosphate appear the most promising. The interpretation of the ISE response in solutions under study relied on a novel approach which considers three forms of calcium: Ca²⁺ free ions, Ca in Ca(DS)₂ precipitate, and Ca²⁺ bound by the DS^? micelles. Data needed for the respective calculations were obtained by DS^? selective electrode based on tetradecylammonium, and Na⁺ selective glass electrode.     

Weighted and roughly weighted simple games

In this paper we give necessary and sufficient conditions for a simple game to have rough weights. We define two functions f(n) and g(n) that measure the deviation of a simple game from a weighted majority game and roughly weighted majority game, respectively. We formulate known results in terms of lower and upper bounds for these functions and improve those bounds. We also investigate rough weightedness of simple games with a small number of players.