Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

Modeling and simulation of first and second sound in solids

We investigate the propagation of mechanical and thermal waves in solids at cryogenic temperatures. The latter are known as the second sound phenomenon. It occurs, e.g., in dielectric solids and differs greatly from the classical case in which the heat transport proceeds by diffusion. Since Fourier’s law of heat conduction fails for modeling second sound, we apply a non-classical one. During the last two decades, the non-classical thermoelastodynamic theory of Green and Naghdi enjoys steadily growing research activities.     

Whirling frequencies and amplitudes due to deviations of generator shape

Earlier measurements in large synchronous generators indicate the existence of backward whirling motion, and also relatively large deviations of shape in both the rotor and the stator. These non-symmetric geometries produce an attraction force between the rotor and the stator, called unbalanced magnetic pull (UMP). The target of this paper is to analyse the whirling frequencies and amplitude of the response for large synchronous generators with a high number of poles, due to deviations of shape in the rotor and stator. A mathematical model is developed to describe the shapes of the rotor and stator, and the corresponding UMP is obtained by using the law of energy conservation. The UMP is analysed due to different deviations of shape. The result gives the average angular frequency and the magnitude of the UMP for certain deviations of shape. From this result, the whirling frequency and the amplitude of the corresponding response can be approximated. Simulations of the response of a Jeffcott rotor model show good agreement with the theoretical results of the UMP for some generator geometries. The conclusion is that different whirling frequencies, both backward and forward whirling, can occur in these machines due to deviations in shape of the generator. Therefore, the shape of the generator can excite resonance vibrations on several other frequencies than the rotation frequency. During maintenance of hydropower generators the shapes of the rotor and stator are frequently measured. The results from this paper can be used to evaluate such measurements and to explain the existence of complicated whirling motion.     

Globally anisotropic high porosity silica aerogels

We discuss two methods by which high porosity silica aerogels can be engineered to exhibit global anisotropy. First, anisotropy can be introduced with axial strain (i.e. axial compression). In addition, intrinsic anisotropy can result during growth and drying stages and, suitably controlled, it can be correlated with preferential radial shrinkage in cylindrical samples. We have performed small angle X-ray scattering (SAXS) to characterize these two types of anisotropy. We show that global anisotropy originating from either strain or shrinkage leads to optical birefringence and that optical cross-polarization studies are a useful characterization of the uniformity of the imposed global anisotropy.     

Spatially localized states in Marangoni convection in binary mixtures

Two-dimensional Marangoni convection in binary mixtures is studied in periodic domains with large spatial period in the horizontal. For negative Soret coefficients convection may set in via growing oscillations which evolve into standing waves. With increasing amplitude these waves undergo a transition to traveling waves, and then to more complex waveforms. Out of this state emerge stable stationary spatially localized structures embedded in a background of small amplitude standing waves. The relation of these states to the time-independent spatially localized states that characterize the so-called pinning region is investigated by exploring the stability properties of the latter, and the associated instabilities are studied using direct numerical simulation in time.     

Electrochemical synthesis of niobium compounds in anodic dissolution of ferroniobium in methanol

Anodic dissolution of ferroniobium in anhydrous methanol in the presence of sodium methylate was studied. The possibility of recovering pure hexamethoxyniobate from the electrolyzate and its conversion into niobium methylate with an iron content not exceeding 0.01% was analyzed.     

A study of the photocatalytic activity of titanium dioxide nanopowders

Photodestruction and adsorption of dyes in aqueous suspensions of nanopowders of titanium dioxide of anatase modification was studied. The photocatalytic activity of titanium dioxide nanopowders was examined in relation to the dispersity of particles and pH of the medium.     

Synthesis and structure of unsymmetrical cross-conjugated dienones with thienyl substituents

By condensation of thiophenecarbaldehyde and m-nitrobenzaldehyde with furyl-, thienylmethylenecyclohexanones in basic medium 2-(het)arylmethylene-6-thienylmethylenecyclohexanones were prepared. Under the conditions of acid catalysis analogously built dienones were synthesized containing 5-nitrothiophene fragment. Based on the data of IR and ¹H NMR spectroscopy their E,E-configuration was established.     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003