Mechanism of the chemo–bio catalyzed cascade synthesis of <Emphasis Type="Italic">R</Emphasis>-1-phenylethyl acetate over Pd/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, lipase,and Ru-catalysts

One-pot synthesis of R-1-phenylethyl acetate was investigated starting from acetophenone hydrogenation performed over Pd/Al₂O₃ and PdZn/Al₂O₃ catalysts followed by acylation of the intermediate secondary alcohol, R-1-phenylethanol, over an immobilized lipase. Furthermore, the performance of a third type of catalyst, Ru supported on hydroxyapatite (HAP) was evaluated for racemization of S-1-phenylethanol in one pot together with the two other catalysts. The main objectives of this work were to separate the effects of different catalysts and to reveal the reaction mechanism. For this purpose not only acetophenone, but also (R,S)-1-phenylethanol, S-1-phenylethanol, R-1-phenylethyl acetate, and styrene were used as reactants in combination with Pd/Al₂O₃, lipase and Ru/HAP as catalysts. The results revealed that the main side product, ethylbenzene, was formed in two different ways, via dehydration of (R,S)-1-phenylethanol to styrene, followed by its rapid hydrogenation to ethylbenzene, and via debenzylation of the desired product, R-1-phenylethyl acetate to ethylbenzene. The true one-pot synthesis, however, was demonstrated over Shvo’s catalyst, but Ru/HAP was not sufficiently active in the racemization step. Ru/Al₂O₃ was a promising catalyst for racemization of S-1-phenylethanol and for dynamic kinetic resolution of (R,S)-1-phenylethanol, when using only small amounts of the acyl donor ethyl acetate. The challenge in racemization is that the activity of heterogeneous Ru catalysts was inhibited by esters.     

Z → E Photoisomerization of Homoactivated Carbon Carbon Double Bonds

Z-configured 1,4-diene or β, γ-unsaturated carbonyl systems are readily available by the Wittig reaction. Isomerization required for access into the E-series can easily be accomplished by irradiation using an ordinary tungsten lamp and diphenyl disulphide sensitizer. There is very little formatation of conjugated isomers (less than 1%).     

Matrix effect in the analysis of drugs of abuse from urine with desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS) and desorption electrospray ionization-mass spectrometry (DESI-MS)

We have studied the matrix effect within direct analysis of benzodiazepines and opioids from urine with desorption electrospray ionization-mass spectrometry (DESI-MS) and desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS). The urine matrix was found to affect the ionization mechanism of the opioids in DAPPI-MS favoring proton transfer over charge exchange reaction. The sensitivity for the drugs in solvent matrix was at the same level with DESI-MS and DAPPI-MS (LODs 0.05–6 μg mL⁻¹) but the decrease in sensitivity due to the urine matrix was higher with DESI (typically 20–160-fold) than with DAPPI (typically 2–15-fold) indicating better matrix tolerance of DAPPI over DESI. Also in MS/MS mode, DAPPI provided better sensitivity than DESI for the drugs in urine. The feasibility of DAPPI-MS/MS was then studied in screening the same drugs from five authentic, forensic post mortem urine samples. A reference measurement with gas chromatography-mass spectrometry (GC–MS) (including pretreatment) revealed 16 findings from the samples, whereas with DAPPI-MS/MS after sample pretreatment, 15 findings were made. Sample pretreatment was found necessary, since only eight findings were made from the same samples untreated.     

First-principles simulation of molecular dissociation-recombination equilibrium

For the first time, the equilibrium composition of chemical dissociation-recombination reaction is simulated from first-principles, only. Furthermore, beyond the conventional ab initio Born-Oppenheimer quantum chemistry the effects from the thermal and quantum equilibrium dynamics of nuclei are consistently included, as well as, the nonadiabatic coupling between the electrons and the nuclei. This has been accomplished by the path integral Monte Carlo simulations for full NVT quantum statistics of the H(3)(+) ion. The molecular total energy, partition function, free energy, entropy, and heat capacity are evaluated in a large temperature range: from below room temperature to temperatures relevant for planetary atmospheric physics. Temperature and density dependent reaction balance of the molecular ion and its fragments above 4000 K is presented, and also the density dependence of thermal ionization above 10,000 K is demonstrated.     

Rapid and sensitive drug metabolism studies by SU-8 microchip capillary electrophoresis-electrospray ionization mass spectrometry

Monolithically integrated, polymer (SU-8) microchips comprising an electrophoretic separation unit, a sheath flow interface, and an electrospray ionization (ESI) emitter were developed to improve the speed and throughput of metabolism research. Validation of the microchip method was performed using bufuralol 1-hydroxylation via CYP450 enzymes as the model reaction. The metabolite, 1-hydroxybufuralol, was easily separated from the substrate (R(s)=0.5) with very good detection sensitivity (LOD=9.3nM), linearity (range: 50-500nM, r(2)=0.9997), and repeatability (RSD(Area)=10.3%, RSD(Migrationtime)=2.5% at 80nM concentration without internal standard). The kinetic parameters of bufuralol 1-hydroxylation determined by the microchip capillary electrophoresis (CE)-ESI/mass spectrometry (MS) method, were comparable to the values presented in literature as well as to the values determined by in-house liquid chromatography (LC)-UV. In addition to enzyme kinetics, metabolic profiling was demonstrated using authentic urine samples from healthy volunteers after intake of either tramadol or paracetamol. As a result, six metabolites of tramadol and four metabolites of paracetamol, including both phase I oxidation products and phase II conjugation products, were detected and separated from each other within 30-35s. Before analysis, the urine samples were pre-treated with on-chip, on-line liquid-phase microextraction (LPME) and the results were compared to those obtained from urine samples pre-treated with conventional C18 solid-phase extraction (SPE, off-chip cartridges). On the basis of our results, the SU-8 CE-ESI/MS microchips incorporating on-chip sample pre-treatment, injection, separation, and ESI/MS detection were proven as efficient and versatile tools for drug metabolism research.     

Negative ion-atmospheric pressure photoionization-mass spectrometry

The ionization mechanism in the novel atmospheric pressure photoionization mass spectrometry (APPI-MS) in negative ion mode was studied thoroughly by the analysis of seven compounds in 17 solvent systems. The compounds possessed either gas-phase acidity or positive electron affinity, whereas the solvent systems had different polarities and gas-phase acidities and some of them positive electron affinities. The analytes that possessed gas-phase acidity formed deprotonated ions in proton transfer; in addition, fragments and solvent adducts were observed. The compounds of positive electron affinity formed negative molecular ions by electron capture or charge exchange and substitution products of form [M - X + O](-) by substitution reactions. The efficiency of deprotonation was decreased if the solvent used possessed higher gas-phase acidity than the analyte. Solvents of positive electron affinity captured thermal electrons and deteriorated the ionization of all the analytes. Also, the proportion of substitution products was affected by the solvent. Finally, the performances of negative ion APPI and negative ion APCI were compared. The sensitivity for the studied compounds was better in APPI, but the formation of substitution products was lower in APCI.     

Catalysis Involving Multi-Centered Species on Nonuniform Surfaces, 2. Kinetics

Multi-centered nature of adsorption as well as adsorbate-adsorbate interactions is addressed. A discussed reaction mechanism includes adsorption of a bulky molecule A, which requires several sites for adsorption, and two successive reaction steps of Eley type. Numerical treatment is performed for a special case of this mechanism.     

Modelling of catalyst deactivation in liquid phase reactions: citral hydrogenation on Ru/Al2O3

Selective hydrogenation of citral was investigated at 70 °C over Ru/Al₂O₃. Activity changes in a series of consecutive experiments were described by a mathematical model, which included reaction kinetics and deactivation. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cross‐Linked Proteins with Gold Nanoclusters: A Dual‐Purpose pH‐Responsive Material for Controllable Cell Imaging and Antibiotic Delivery

This report describes the development of a facile method for the synthesis of cross‐linked proteins with gold nanoclusters (CP‐GNC). The synthesis reaction is completed within 15 min at 97 °C. The synthesized CP‐GNC are characterized by using UV–vis absorption, fluorescence, X‐ray photoelectron spectroscopy, and transmission electron microscopy. CP‐GNC are approximately 100 nm in diameter and 700 nm in length, whereas AuNCs within the nanorods are approximately 6 nm in size. These materials are highly fluorescent with quantum yield of 7.2% and can be absorbed onto and release from bacterial cells in a pH‐dependent and reversible manner. The recent data show that CP‐GNC can be a useful, new tool with potential applications in fluorescent cell imaging and antibiotic targeting.     

The effect of wall depletion on the rheology of microfibrillated cellulose water suspensions by optical coherence tomography

Rheology of microfibrillated cellulose (MFC) water suspensions was characterized with a rotational rheometer, augmented with optical coherence tomography (OCT). To the best of the authors’ knowledge, this is the first time the behavior of MFC in the rheometer gap was characterized by this real-time imaging method. Two concentrations, 0.5 and 1 wt% were used, the latter also with 10^?3 and 10^?2 M NaCl. The aim was to follow the structure of the suspensions in a rotational rheometer during the measurements and observe wall depletion and other factors that can interfere with the rheological results. The stepped flow measurements were performed using a transparent cylindrical measuring system and combining the optical information to rheological parameters. OCT allows imaging in radial direction from the outer geometry boundary to the inner geometry boundary making both the shear rate profile and the structure of the suspension visible through the rheometer gap. Yield stress and maximum wall stress were determined by start-up of steady shear and logarithmic stress ramp methods and they both reflected in the stepped flow measurements. Above yield stress, floc size was inversely proportional to shear rate. Below the yield stress, flocs adhered to each other and the observed apparent constant shear stress was controlled by flow in the depleted boundary layer. With higher ionic strength (10^?2 M NaCl), the combination of yield stress and wall depletion favored the formation of vertical, cylindrical, rotating floc structures (rollers) coupled with a thicker water layer originating at the suspension—inner cylinder boundary at low shear rates.