Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

A side-coupled photonic crystal filter with sidelobe suppression

This paper presents the theoretical model and the optimization method to suppress the sidelobes of side-coupled photonic crystal filters. Numerical verification shows a good agreement between the theoretical method and the finite-difference time-domain simulation, but the theoretic method does not involve the time-consuming computation. The theoretical method also presents a better physical image for choosing the critical parameters, such as the quality factor, phase shift and the number of resonators. Based on the theoretical model, two optimization methods (chirp and cascading) are proposed to deeply suppress the sidelobes. They also show more flexibility in controlling the bandwidth and steepness of the roll-off in the filter. PACS 42.70.Qs     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.     

一类没有单调性假设的渐近线性波方程的多解

本文借助文[1]除去零空间的技巧,利用L—S度数理论讨论了一类浙近线性波方程。在对非线性项不做单调性假设的前提下,给出了一个新的多解定理。     

A generalization of biorthogonal systems based on Drazin inverse

In this paper, the transformations of generating systems of Euclidean space are examined in connection with the Drazin inverse of their Gram matrices and the notion of biorthogonal systems is generalized. The results obtained in this paper can be considered as the extension of some recent results concerning Moore-Penrose biorthogonal systems and reflexiveg-inverse systems in Euclidean spaces.     

Modeling of the microwave drying process of aqueous dielectrics

We propose a thermodynamic framework for describing the microwave drying process of aqueous dielectrics based on Maxwell-Lorentz Field equations and mixture theory. Several issues are discussed such as the form of entropy equation; the constitutive relations for the macroscopic electric polarization vectors, Cauchy stresses, heat fluxes, internal momentum supplies, etc., for each component of the mixture: porous solid, water and gas in different regions; and the interfacial jump conditions between different regions in the mixture. A brief examination of the status of material frame indifference within the context of our framework is presented.     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

神经网络在工程爆破应力波规律探讨中的应用

采用BP（Back Propagation)前馈人工神经网络模型，对工程爆破中柱状震源的自由场应力波传播规律进行了探讨。结果表明：利用人神经网络模型的非线性映射功能，可以较好地给出工程爆破引起的近区自由场力学规律，对于同类型问题的研究，也有着很重要的意义。     

二阶Volterra系统对平稳正态激励的统计响应的表示定理的数学证明

1974年,Neal根据Kac和Siegert的思想,给出了一个在电子工程、海洋工程、建筑工程、航空工程、自动控制的随机振动中有重要应用的二阶Volterra非线性系统对平稳正态输入的统计响应的表示定理.1984年,Naess对此定理又给出了一个数学证明.经过研究后发现,他们对定理条件的叙述都是模糊的,而且其数学证明都是有问题的.本文重新讨论了这个表示定理,给出了明确的定理条件及严格的数学证明,为它的广泛应用奠定了理论基础.     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006