The incorporation of carboxylate groups into temperature‐responsive poly(N‐isopropylacrylamide)‐based hydrogels promotes rapid gel shrinking

Aqueous gel deswelling rates for copolymer hydrogels comprising N‐isopropylacrylamide (IPAAm) and 2‐carboxyisopropylacrylamide (CIPAAm) in response to increasing temperatures were investigated. Compared with pure IPAAm‐based gels, IPAAm–CIPAAm gels shrink very rapidly in response to small temperature increases across their lower critical solution temperature (their volume is reduced by five‐sixths within 60 s). Shrinking rates for these hydrogels increase with increasing CIPAAm content. In contrast, structurally analogous IPAAm–acrylic acid (AAc) copolymer gels lose their temperature sensitivity with the introduction of only a few mole percent of AAc. Additionally, deswelling rates of IPAAm–AAc gels decrease with increasing AAc content. These results indicate that IPAAm–CIPAAm copolymer gels behave distinctly from IPAAm–AAc systems even if both comonomers, CIPAAm and AAc, possess carboxylic acid groups. Thus, we propose that the sensitive deswelling behavior for IPAAm–CIPAAm gels results from strong hydrophobic chain aggregation maintained between network polymer chains due to the similar chemical structures of CIPAAm and IPAAm. This structural homology facilitates aggregation of chain isopropylamide groups for both IPAAm and CIPAAm sequences with increasing temperature. The incorporation of AAc, however, shows no structural homology to IPAAm, inhibiting chain aggregation and limiting collapse. A functionalized temperature‐sensitive poly(N‐isopropylacrylamide) hydrogel containing carboxylic acid groups is possible with CIPAAm, producing rapid and large volume changes in response to smaller temperature changes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 335–342, 2001     

Development of a new software for the X-ray structural analysis of polymer crystals by utilizing the X-ray imaging plate system

A software and some useful tools have been developed for identifying individual x-ray reflectional peaks recorded with an x-ray imaging plate system. These techniques were applied to analyze the crystal structure of uniaxially oriented polymer samples. Characteristic features of the present method may be summarized as follows. (1) The indexing of the observed reflections and the determination of the unit cell parameters can be made easily on the display of the computer. (2) The integrated intensity of the individual component of the overlapped reflections can be evaluated quantitatively through the curve separation technique. The R_merge's for the equivalent reflections were 5–6%, indicating the exact evaluation of the integrated intensities. (3) The thus obtained reflectional data were successfully utilized for the extraction of the initial structural models by the direct method. The actual applications have been made for orthorhombic polyethylene, trigonal polyoxymethylene, and isotactic polybutene-1, giving the refined crystal structures including even the positions of hydrogen atoms in some cases. The reliability factors were 12, 5, and 15%, respectively, for these three polymer cyrstals. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1677–1700, 1997     

siRNA-mediated Knockdown of the Heme Synthesis and Degradation Pathways: Modulation of Treatment Effect of 5-Aminolevulinic Acid-based Photodynamic Therapy in Urothelial Cancer Cell Lines

Photodynamic therapy mediated by 5-aminolevulinic acid (ALA-PDT) has been developed as a therapeutic modality for refractory superficial bladder cancers. Here, in experiments using urothelial cancer cell lines, we investigated the effects of siRNA modulating heme-synthetic and degradation pathways for ALA-PDT. Targeted knockdown of ferrochelatase (FECH) suppressed heme synthesis and significantly increased intracellular protoporphyrin IX (PpIX) accumulation, leading to enhanced phototoxicity in four of five cell lines. Heme oxygenase-1 (HO-1) is recognized as important for cytoprotection against oxidative stress such as PDT. Targeted knockdown of HO-1 leads to decreased intracellular PpIX accumulation, resulting in a failure to enhance ALA-PDT effect in four cell lines. Knockdown of HO-1 caused marked growth inhibition in UM-UC-2 overexpressing HO-1, whereas no inhibitory effect was observed in UM-UC-3 lacking HO-1 expression. Moreover, HO-1 protein levels and (GT) _n repeat polymorphism of the HO-1 gene promoter region were examined with the implication that the constitutive expressions of HO-1 protein were associated with a shorter (GT) _n repeat. Our results suggested that (1) FECH siRNA improved the phototoxicity of ALA-PDT, (2) overexpression of HO-1 was associated with shorter (GT) _n repeat of the promoter region, and (3) siRNA-mediated knockdown of HO-1 could suppress the growth of bladder cancer cells overexpressing HO-1.     

Histidine-tagged shiga toxin B subunit binding assay: simple and specific determination of gb3 content in mammalian cells

A two-step binding assay for globotriaosylceramide (Gb3) content was developed by histidine-tagging strategy, which is a well-established method for the purification of recombinant proteins. The complete binding of the recombinant His-tagged Shiga toxin 1B subunit (1B-His) (1 microg/ml) to the standard Gb3 adsorbed on a multi-well H type plate was observed within 30 min at 37 degrees C; and its binding could be visualized by the following applications of HisProbe-HRP (8 microg/ml) and tetramethylbenzidine (TMB) peroxidase substrate. The 1B-His binding assay was linear over the range of 1 to 100 ng of Gb3 per well. The binding of 1B-His was specific to Gb3 separated from HeLa cells, and no major cross-reactivity of other glycolipids in Folch's lower fractions extracted from HeLa cells was detected. The glycolipids in Folch's lower fractions from HeLa cells, human fibroblasts and mouse heart were suitable for this assay, but the further purification was needed for glycolipids from human plasma, thus sample preparation is critical factor for the reliable determination of Gb3 content. The 1B-His binding to Gb3 was inhibited by the addition of galactose, but not mannose. This 1B-His binding assay will be useful not only for the determination of Gb3 content, but also for screening for the compounds which inhibit the toxin-binding to Gb3. The strategy of our present method may be applicable for other binding assay, such as Cholera toxin B-subunit for ganglioside GM1.     

Self-regulated Ni cluster formation on the TiO2(1 1 0) terrace studied using scanning tunneling microscopy

We have studied the growth mode and morphology of Ni clusters on a TiO₂(1 1 0) surface with a wide terrace using scanning tunneling microscopy (STM) at a low coverage (less than 3 atoms nm⁻²). The Ni clusters are formed on the terrace at the low coverage of 0.2 atoms nm⁻². Their average dimensions are constant in three directions up to 1 atoms nm⁻². The Ni clusters have an oval shape with average sizes of 1.8 nm (along [0 0 1]) × 1.4 nm (along (in the [1 1 0] directions). Above the coverage of 1.0 atoms nm⁻², an increase in the cluster height occurs, retaining an almost constant lateral size. It is proposed that the interaction of the Ni cluster and the support surface regulates the Ni cluster size.     

Evidence of Nonelectrochemical Shift Reaction on a CO-Tolerant High-Entropy State Pt-Ru Anode Catalyst for Reliable and Efficient Residential Fuel Cell Systems

A randomly mixed monodispersed nanosized Pt-Ru catalyst, an ultimate catalyst for CO oxidation reaction, was prepared by the rapid quenching method. The mechanism of CO oxidation reaction on the Pt-Ru anode catalyst was elucidated by investigating the relation between the rate of CO oxidation reaction and the current density. The rate of CO oxidation reaction increased with an increase in unoccupied sites kinetically formed by hydrogen oxidation reaction, and the rate was independent of anode potential. Results of extended X-ray absorption fine structure spectroscopy showed the combination of N(Pt-Ru)/(N(Pt-Ru) + N(Pt-Pt)) ? M(Ru)/(M(Pt) + M(Ru)) and N(Ru-Pt)/(N(Ru-Pt) + N(Ru-Ru)) ? M(Pt)/(M(Ru) + M(Pt)), where N(Pt-Ru)(N(Ru-Pt)), N(Pt-Pt)(N(Ru-Ru)), M(Pt), and M(Ru) are the coordination numbers from Pt(Ru) to Ru(Pt) and Pt (Ru) to Pt (Ru) and the molar ratios of Pt and Ru, respectively. This indicates that Pt and Ru were mixed with a completely random distribution. A high-entropy state of dispersion of Pt and Ru could be maintained by rapid quenching from a high temperature. It is concluded that a nonelectrochemical shift reaction on a randomly mixed Pt-Ru catalyst is important to enhance the efficiency of residential fuel cell systems under operation conditions.     

Multiple ligand transfer reaction between [CpRu(L)(AN)2][PF6] (L=AN, CO, P(OMe)3; AN=acetonitrile) and CpFe(CO)L′X (L′=CO, PMe3, PMe2Ph, PMePh2, PPh3, P(OPh)3; X=Cl, Br, I)

Treatment of ruthenium complexes [CpRu(AN)₃][PF₆] (1a) (AN=acetonitrile) with iron complexes CpFe(CO)₂X (2a–2c) (X=Cl, Br, I) and CpFe(CO)L′X (6a–6g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Cl, Br, I) in refluxing CH₂Cl₂ for 3 h results in a triple ligand transfer reaction from iron to ruthenium to give stable ruthenium complexes CpRu(CO)₂X (3a–3c) (X=Cl, Br, I) and CpRu(CO)L′X (7a–7g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Br, I), respectively. Similar reaction of [CpRu(L)(AN)₂][PF₆] (1b: L=CO, 1c: P(OMe)₃) causes double ligand transfer to yield complexes 3a–3c and 7a–7h. Halide on iron, CO on iron or ruthenium, and two acetonitrile ligands on ruthenium are essential for the present ligand transfer reaction. The dinuclear ruthenium complex 11a [CpRu(CO)(μ-I)]₂ was isolated from the reaction of 1a with 6a at 0°C. Complex 11a slowly decomposes in CH₂Cl₂ at room temperature to give 3a, and transforms into 7a by the reaction with PMe₃.     

Finite element analysis of density flow using the velocity correction method

A finite element method is proposed for the analysis of density flow which is induced by a difference of density. The method employs the idea that density variation can be pursued by using markers distributed in the flow field. For the numerical integration scheme, the velocity correction method is successfully used, introducing a potential for the correction of velocity. This method is useful because one can use linear interpolation functions for velocity, pressure and potential based on the triangular finite element. The final equations can be formulated using the quasi-explicit finite element method. A flume in a tank with sloping bottom has been analysed by the present method. The computed results show extremely good agreement with the experimental observations.     

Expressed Sequence Tag Analysis of the Dinoflagellate Lingulodinium polyedrum During Dark Phase¶

To collect information on gene expression during the dark period in the luminous dinoflagellate Lingulodinium polyedrum, normalized complementary DNA (cDNA) libraries were constructed from cells collected during the first hour of night phase in a 12:12 h light‐dark cycle. A total of 4324 5′‐end sequence tags were isolated. The sequences were grouped into 2111 independent expressed sequence tags (EST) from which 433 groups were established by similarity searches of the public nonredundant protein database. Homology analysis of the total sequences indicated that the luminous dinoflagellate is more similar to land plants and animals (vertebrates and invertebrates) than to prokaryotes or algae. We also isolated three bioluminescence‐related (luciferase and two luciferinbinding proteins [LBP]) and 37 photosynthesis‐related genes. Interestingly, two kinds of LBP genes occur in multiple copies in the genome, in contrast to the single luciferase gene. These cDNA clones and EST sequence data should provide a powerful resource for future genome‐wide functional analyses for uncharacterized genes.