A gas-kinetic scheme for shallow-water equations with source terms

In this paper, the Kinetic Flux Vector Splitting (KFVS) scheme is extended to solving the shallow water equations with source terms. To develop a well-balanced scheme between the source term and the flow convection, the source term effect is accounted in the flux evaluation across cell interfaces. This leads to a modified gas-kinetic scheme with particular application to the shallow water equations with bottom topography. Numerical experiments show better resolution of the unsteady solution than conventional finite difference method and KFVS method with little additional cost. Moreover, some positivity properties of the gas-kinetic scheme is established.     

CONSTRUCTION OF SOME KIESSWETTER-LIKE FUNCTIONS-THE CONTINUOUS BUT NON-DIFFERENTIABLE FUNCTION DEFINED BY QUINARY DECIMAL

In this paper, we construct some continuous but non-differentiable functions defined by quinary decimal, that are Kiesswetter-like functions. We discuss their properties, then investigate the Hausdorff dimensions of graphs of these functions and give a detailed proof.     

Temperature measurements using fiber optic polarization interferometer

A novel measurement method of temperature based on the phenomena that the phase difference between principle polarization states in the optical retarder is function of temperature is described. The polarization state of optical beam is changed as it passes through the optical retarder, which depends on the temperature. The temperature of optical retarder is determined by comparison of the power difference between principal polarization states. We demonstrate successfully the temperature measurement by using a polarization maintaining fiber as the optical retarder. With a 100 mm length of the fiber optic retarder, the change rate of phase difference on temperature was 0.236 rad/°C and the measurement error was ±0.038°C over the temperature range of −2.6 – +3.4°C. With a 11.5 mm length of the fiber optic retarder, the change rate of phase difference on temperature was 0.021 rad/°C and the measurement error was ±0.79°C over the temperature range of −8.5 – +86.5°C.     

Directed Motion of a Molecular Motor Based on the Four-State Model with Unequal Substeps

A periodic one-dimensional four-state hopping model is proposed. In the model, the substeps betweenarbitrary adjacent states are unequal, and an explicit solution of the master equation is first obtained for the probabilitydistribution as a function of the time and position for any initial distribution with all the transients included. Next, thetransient behaviors in the initial period of time and the characteristic time to reach the steady state for the molecularmotor are discussed. Finally, we compare the steady state results to experiments and illustrate qualitatively the kineticbehaviors of a molecular motor under external load F.     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

某轴流压气机叶尖间隙效应实验研究

本文对某低速轴流压气机叶尖间隙尺度对性能的影响进行了实验研究,并通过不同的机匣结构情况研究一种叶尖漏流不敏感机匣。实验表明,不同的间隙尺度对叶轮机总体性能存在十分明显的影响。对绝大部分运行状态,小间隙下的压升和效率均明显高于大间隙的情况。另外,所采用的毛刷式和篦齿式的机匣实验结果表明,不论毛刷式还是篦齿式机匣,在大流量负攻角情况下对性能的影响不大,但毛刷式机匣并不能达到提高失速裕度的目的,而篦齿式机匣在小流量情况下对压升有所提高,但对效率影响不大。     

斐索梯度折射率光纤透镜传感实验

采用LD泵浦的单纵模Nd：YVO4倍频激光器、梯度折射率光纤透镜等器件构成斐索梯度折射率光纤透镜传感实验仪．本文介绍了实验装置和实验原理，并给出了实验结果。     

Approximate confidence limits of the reliability performances for a cold standby series system

This paper is to investigate the approximate confidence limits of the reliability performances (such as failure rate, reliability function and average life) for a cold standby series system. The Bayesian approximate upper confidence limit of failure rate is obtained firstly, and next Bayesian approximate lower confidence limits for reliability function and average life are presented. The expressions for calculating Bayesian lower confidence limits of the reliability function and average life are also obtained, and an illustrative example is examined numerically by means of the Monte-Carlo simulation. Finally, the accuracy of confidence limits is discussed.     

数字全息中再现像分离问题的研究

详细分析了数字全息的再现像分离条件,指出数字全息和普通全息的再现像分离条件之间的区别,同时也讨论了再现条件对数字全息记录光路的要求,同时给出一种能部分避免再现像重叠的处理方法,并做出相应的实验验证.