Crystal structures and thermal decomposition kinetics of lanthanide complexes with 3,4,5-trimethoxybenzoic acid and 1,10-phenanthroline

A series of lanthanide complexes with the 3,4,5-trimethoxybenzoic acid(3,4,5-tmoba) and 1,10-phenanthroline(phen),[Ln(3,4,5-tmoba) 3 phen] 2(Ln = Pr(1),Nd(2) and Ho(3)),have been synthesized and characterized by a series of techniques including elemental analysis,IR spectra,X-ray crystallography and TG/DSC-FTIR technology.The three complexes have two kinds of coordination modes,in which the Pr 3+ and Nd 3+ cations are nine-coordinated and the Ho 3+ cation is eight-coordinated.The three-dimensional IR accumulation spectra of gaseous products for complexes 1-3 were analyzed and the gaseous products were identified by the typical IR spectra obtained from the 3D surface graphs.Meanwhile,we obtained the activation energy E of the first steps of complexes 1-3 by the integral isoconversional non-linear(NL-INT) method and discussed the non-isothermal kinetics of complexes 1-3 using the Malek method.Finally,SB(m,n) was defined as the kinetic method of the first-step thermal decomposition.The thermodynamic parameters △G≠,△H≠ and △S≠ of activation at the peak temperature were also calculated.     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

LaGaO3基固体氧化物燃料电池阳极材料Ce1-xTmxO2-δ（Tm=Cu,Mn,Fe）研究

以研究与Sr,Mg掺杂LaGaO3(LSGM)电解质匹配的阳极材料为出发点,系统研究了Ce1-xTmxO2-δ(Tm=Cu,Mn,Fe)固溶体的晶体结构、热化学稳定性、电化学性能和单电池发电实验。柠檬酸法合成的Ce1-xTmxO2-δ化合物在x<0.2时均为单相材料,与LSGM电解质有良好的热化学相容性。采用交流阻抗法研究了阳极材料的电化学性能,金属元素掺杂可以显著地改善CeO2电化学性能,Fe元素掺杂阳极材料极化电阻最小,随着元素掺杂量的增加以及氢气增湿,极化电阻减小。采用电解质支撑结构单电池进行发电实验,在800℃时,以Ce0.8Fe0.2O2-δ作为阳极的单电池最高功率密度可达98 mW.cm-2,表明该材料作为IT-SOFC的阳极材料具有一定的可行性,有望成为适合LSGM电解质的阳极材料。     

Mg-Ni-Nd非晶电极合金充放电过程中的组织结构变化及对其放电容量的影响

采用熔体快淬法制备了(Mg70.6 Ni29.4)90Nd10的非晶贮氢合金带,用X射线衍射仪和高分辨电镜对该合金在充放电循环过程中的组织结构演变进行了动态跟踪.结果表明:(Mg70.6Ni29.4)90Nd10贮氢合金在充放电循环过程中由非晶态慢慢晶化为纳米晶,初生相NdMg2 Ni9在循环过程中逐渐转化为Mg2 Ni,α-Mg和Nd2H5相.电化学性能测试表明,由于微观结构的变化对其放电容量的影响过程分为3个阶段:首先是前两个循环的活化过程,在第3个循环达到放电容量最高值(580.5 mAh·g-1);接下来是放电容量显著降低的4～10个循环阶段;最后是放电容量保持稳定的11 ～20个循环.研究发现NdMg2 Ni9相的存在和保持合金的非晶结构是提高镁基电极合金循环稳定性的重要因素.     

碳纳米管表面修饰程度对其载Pd纳米粒子的电催化氧化水合肼性能的影响

比较了未氧化处理与经浓硝酸或混酸(浓硫酸与浓硝酸体积比为1∶1)处理后的不同多壁碳纳米管(MWNTs)为载体的Pd催化剂(Pd/MWNTs)对水合肼氧化的电催化性能. 光谱表征和电化学测试结果表明, MWNTs表面不修饰或修饰程度过大都不利于金属Pd纳米粒子的沉积. 浓硝酸处理使MWNTs表面修饰的含氧基团适中, 能够促进负载的Pd纳米粒子均一分布, 因此提高Pd/MWNTs催化剂对水合肼的电催化性能. 相反, 混酸处理使MWNTs表面产生的含氧基团过多, 导致金属Pd纳米粒子部分聚集, 从而降低Pd/MWNTs催化剂对水合肼的电催化性能.     

Comprehensive characterization of the N-glycosylation status of CD44s by use of multiple mass spectrometry-based techniques

The CD44 family are type-1 transmembrane glycoproteins which are important in mediating the response of cells to their microenvironment, including regulation of growth, survival, differentiation, and motility. All these important functions have been reported to be regulated by N-glycosylation; however, little is known about this process. In the CD44 family, the most prolific isoform is CD44 standard type (CD44s). In this work, an integrated strategy combining stable isotope labeling, chemical derivatization, hydrophilic-interaction liquid chromatographic (HILIC) separation, and mass spectrometric (MS) identification was used to perform a comprehensive qualitative and quantitative survey of the N-glycosylation of recombinant CD44s. Specifically, the occupation ratios of the N-glycosites were first determined by MS with (18)O labeling; the results revealed five glycosites with different occupation ratios. Next, N-glycans were profiled by chemical derivatization and exoglycosidase digestion, followed by MALDI-TOF-MS and HILIC-ESI-MS-MS analysis. Interestingly, the quantitative analysis showed that non-sialylated, fucosylated complex-type glycans dominated the N-glycans of CD44s. Furthermore, the site-specific N-glycan distributions profiled by LC-ESI-MS(E) indicated that most glycosites bore complex-type glycans, except for glycosite N100, which was occupied by high-mannose-type N-glycans. This is the first comprehensive report of the N-glycosylation of CD44s. Figure Strategies for characterization of the N-glycosylation status of CD44s.     

表面修饰多壁碳纳米管负载二氧化钛的制备及催化碳酸二甲酯与苯酚酯交换反应的性能

制备了表面修饰多壁碳纳米管负载TiO₂的催化剂,并将其应用于碳酸二甲酯与苯酚的酯交换反应. 采用X射线电子能谱、透射电子显微镜、低温N₂吸附-脱附和X射线衍射等对催化剂进行了表征. 结果表明,以低浓度的氨水（0.4%）代替去离子水作为沉淀剂时,制备的催化剂显示出更好的催化活性、分离性与重复使用性. 考察了TiO₂负载量、催化剂用量及反应时间对反应性能的影响. 在最佳反应条件下,苯酚转化率为42.5%,碳酸甲苯酯与碳酸二苯酯的总选择性达到99.9%以上. 经过4次重复使用后,催化剂的活性略有下降.     

发展高效的不对称Suzuki-Miyaura偶联反应及其合成应用

为解决不对称Suzuki-Miyaura交叉偶联反应中活性和选择性问题,我们设计并发展了一系列结构刚性的手性联芳基单膦配体.在发展高活性的大位阻交叉偶联反应方面,成功地实现了邻位四取代芳基芳基之间的Suzuki-Miyaura交叉偶联,并发展了官能团化的大位阻交叉偶联,在邻位二取代芳基溴苯与二级烷基硼酸之间的大位阻芳基烷基交叉偶联中也取得进展.在发展高立体选择性的交叉偶联反应方面,我们采用手性大位阻单膦配体和底物间次级作用相结合的设计理念,利用苯并噁唑啉酮辅基和芳基间的π-π作用,成功地发展了高立体选择性的邻位酰基化芳基芳基间不对称Suzuki-Miyaura偶联;利用极性基团双(2-氧代-3-噁唑烷基)次磷酰基(BOP)辅基和芳基间的极性π作用,成功地实现了应用性强的邻位氧基取代芳基芳基间高效不对称Suzuki-Miyaura偶联.最后我们首次将高效的不对称SuzukiMiyaura偶联方法学应用于天然产物合成,完成了手性联芳基天然产物Korupensamine A和Korupensamine B的高效不对称合成,并完成天然产物Michellamine B的立体选择性全合成.     

对流层大气过氧自由基实地测量的技术进展及其在化学机理研究中的应用

大气过氧自由基化学是对流层大气化学的重要组成部分,对于理解大气氧化性、光化学臭氧和二次有机气溶胶生成等核心科学问题具有重要意义。基于实地测量,准确掌握大气过氧自由基的浓度水平、进行相关化学行为分析以及实测结果模拟分析一直是大气过氧自由基化学研究的重点和难点。本文总结了大气过氧自由基实地测量的技术方法,回顾了涉及大气过氧自由基的大型实地观测实验,分析了已有观测实验中大气过氧自由基的浓度水平和差异,归纳了实地测量数据在化学机理研究中的应用,讨论了模拟分析实地测量结果中的主要科学发现。最后,提出该领域中尚存在的问题及可能的重点研究方向。     

A simple and efficient copper oxide-catalyzed Barbier–Grignard reaction of unactivated aryl or alkyl bromides with ester

An efficient one-pot route to synthesize tertiary alcohol compounds using Barbier–Grignard reaction of unactivated alkyl or aryl bromides with ester in THF at 65 °C catalyzed by CuO has been developed and systematically investigated. A wide range of substituted tertiary alcohol compounds were obtained in good to high yields. The reaction is highly chemoselective. The mechanism involving the leaving group of R²O^-group is discussed.