An efficient approach to isoquinoline via AgNO3-promoted 6-endo-dig cyclization followed by oxidative elimination of o-alkynylarylaldimines and its application in fluoride recognition

A novel 6-endo-dig cyclization followed by oxidation/elimination of o-alkynylarylaldimines with 4-hydroxybenzylamine was developed for preparation of isoquinolines. The intermediates of this tandem reaction were monitored by mass spectroscopy (MS) to confirm the reaction pathway. This methodology was further applied to the design and synthesis of a novel ratiometric chemosensor for determination of fluoride.     

An All‐Inorganic Perovskite‐Phase Rubidium Lead Bromide Nanolaser

Rubidium lead halides (RbPbX₃), an important class of all‐inorganic metal halide perovskites, are attracting increasing attention for photovoltaic applications. However, limited by its lower Goldschmidt tolerance factor t≈0.78, all‐inorganic RbPbBr₃ has not been reported. Now, the crystal structure, X‐ray diffraction (XRD) pattern, and band structure of perovskite‐phase RbPbBr₃ has now been investigated. Perovskite‐phase RbPbBr₃ is unstable at room temperature and transforms to photoluminescence (PL)‐inactive non‐perovskite. The structural evolution and mechanism of the perovskite–non‐perovskite phase transition were clarified in RbPbBr₃. Experimentally, perovskite‐phase RbPbBr₃ was realized through a dual‐source chemical vapor deposition and annealing process. These perovskite‐phase microspheres showed strong PL emission at about 464 nm. This new perovskite can serve as a gain medium and microcavity to achieve broadband (475–540 nm) single‐mode lasing with a high Q of about 2100.     

Hole‐Boosted Cu(Cr,M)O2 Nanocrystals for All‐Inorganic CsPbBr3 Perovskite Solar Cells

The all‐inorganic CsPbBr₃ perovskite solar cell (PSC) is a promising solution to balance the high efficiency and poor stability of state‐of‐the‐art organic–inorganic PSCs. Setting inorganic hole‐transporting layers at the perovskite/electrode interface decreases charge carrier recombination without sacrificing superiority in air. Now, M‐substituted, p‐type inorganic Cu(Cr,M)O₂ (M=Ba²⁺, Ca²⁺, or Ni²⁺) nanocrystals with enhanced hole‐transporting characteristics by increasing interstitial oxygen effectively extract holes from perovskite. The all‐inorganic CsPbBr₃ PSC with a device structure of FTO/c‐TiO₂/m‐TiO₂/CsPbBr₃/Cu(Cr,M)O₂/carbon achieves an efficiency up to 10.18 % and it increases to 10.79 % by doping Sm³⁺ ions into perovskite halide, which is much higher than 7.39 % for the hole‐free device. The unencapsulated Cu(Cr,Ba)O₂‐based PSC presents a remarkable stability in air in either 80 % humidity over 60 days or 80 °C conditions over 40 days or light illumination for 7 days.     

Designing and Constructing a High‐Temperature Molecular Ferroelectric by Anion and Cation Replacement in a Simple Crown Ether Clathrate

Molecular ferroelectrics have displayed a promising future since they are light‐weight, flexible, environmentally friendly and easily synthesized, compared to traditional inorganic ferroelectrics. However, how to precisely design a molecular ferroelectric from a non‐ferroelectric phase transition molecular system is still a great challenge. Here we designed and constructed a molecular ferroelectric by double regulation of the anion and cation in a simple crown ether clathrate, 4 , [K(18‐crown‐6)]⁺[PF₆]^?. By replacing K⁺ and PF₆^? with H₃O⁺ and [FeCl₄]^? respectively, we obtained a new molecular ferroelectric [H₃O(18‐crown‐6)]⁺[FeCl₄]^?, 1 . Compound 1 undergoes a para‐ferroelectric phase transition near 350 K with symmetry change from P21/n to the Pmc21 space group. X‐ray single‐crystal diffraction analysis suggests that the phase transition was mainly triggered by the displacement motion of H₃O⁺ and [FeCl₄]^? ions and twist motion of 18‐crown‐6 molecule. Strikingly, compound 1 shows high a Curie temperature (350 K), ultra‐strong second harmonic generation signals (nearly 8 times of KDP), remarkable dielectric switching effect and large spontaneous polarization. We believe that this research will pave the way to design and build high‐quality molecular ferroelectrics as well as their application in smart materials.     

Broadband Light Harvesting and Unidirectional Electron Flow for Efficient Electron Accumulation for Hydrogen Generation

The efficiency of solar hydrogen evolution closely depends on the multiple electrons accumulation on the catalytic center for two‐electron‐involved water reduction. Herein, we report an effective approach to enable broadband light absorption and unidirectional electron flow for efficiently accumulating electrons at active sites for hydrogen evolution by rationally engineering the nanostructure of Pt nanoparticles (NPs), TiO₂, and SiO₂ support. In addition to Schottky‐junction‐driven electron transfer from TiO₂ to Pt, Pt NPs also produce hot electrons by recycling the scattered visible and near‐infrared (vis‐NIR) light of the support. Unidirectional electron flow to active sites is realized by tuning the components spatial distribution. These features collectively accumulate multiple electrons at catalytic Pt sites, thereby affording enhanced activity toward hydrogen evolution under simulated sunlight.     

Skin‐worn Soft Microfluidic Potentiometric Detection System

A flexible skin‐mounted microfluidic potentiometric device for simultaneous electrochemical monitoring of sodium and potassium in sweat is presented. The wearable device allows efficient natural sweat pumping to the potentiometric detection chamber, containing solid‐contact ion‐selective Na⁺ and K⁺ electrodes, during exercise activity. The fabricated microchip electrolyte‐sensing device displays good analytical performance and addresses sweat mixing and carry‐over issues of early epidermal potentiometric sensors. Such soft skin‐worn microchip platform integrates potentiometric measurement, microfluidic technologies with flexible electronics for real‐time wireless data transmission to mobile devices. The new fully integrated microfluidic electrolyte‐detection device paves the way for practical fitness and health monitoring applications.     

Programmed Release of Dihydroartemisinin for Synergistic Cancer Therapy Using a CaCO3 Mineralized Metal–Organic Framework

Dihydroartemisinin (DHA) has attracted increasing attention as an anticancer agent. However, using DHA to treat cancer usually depends on the synergistic effects of exogenous components, and the loss of DHA during delivery reduces its effectiveness in cancer therapy. Reported herein is a programmed release nanoplatform of DHA to synergistically treat cancer with a Fe‐TCPP [(4,4,4,4‐(porphine‐5,10,15,20‐tetrayl) tetrakis(benzoic acid)] NMOF (nanoscale MOF) having a CaCO₃ mineralized coating, which prevents DHA leakage during transport in the bloodstream. When the nanoplatform arrives at the tumor site, the weakly acidic microenvironment and high concentration of glutathione (GSH) trigger DHA release and TCPP activation, enabling the synergistic Fe²⁺‐DHA‐mediated chemodynamic therapy, Ca²⁺‐DHA‐mediated oncosis therapy, and TCPP‐mediated photodynamic therapy. In vivo experiments demonstrated that the nanoplatform showed enhanced anticancer efficiency and negligible toxicity.     

Molecular Design,Circularly Polarized Luminescence,and Helical Self‐Assembly of Chiral Aggregation‐Induced Emission Molecules

Aggregation‐induced emission luminogens (AIEgens) are a new class of luminophors, which are non‐emissive in solution, but emit intensively upon aggregation. By properly designing the chemical structures of the AIEgens, their aggregation process can be tuned towards a desired direction to give diverse novel luminescent architectures of micelles, rods, and helical fibers. AIEgens represent a kind of promising building block for the fabrication of luminescent micro/nanostructures with controllable morphologies. In this review, we describe our recent work in this research area, focusing on the molecular design, circularly polarized luminescence properties, and helical self‐assembly behavior of AIEgens.     

Hexanuclear 3d − 4f metal–organic cages assembled from a carboxylic acid‐functionalized tris‐triazamacrocycle for highly selective fluorescent sensing of picric acid

Two Ln^III ions are sandwiched by dinuclear Co^II building blocks derived from a tris‐triazamacrocyclic ligand bearing pendant carboxylic acid functionality, 1,3,5‐tris((4,7‐bis(2‐carboxyethyl)‐1,4,7‐triazacyclonon‐1‐yl)methyl)‐benzene (H₆L), giving rising to two nanoscale heterometallic metal–organic cages formulated as [Co₄Ln₂(LH_2.5)₂(H₂O)₄]·(ClO₄)₆·NO₃·nH₂O [Ln = Dy, n = 12 ( 1 ); Ln = Yb, n = 9 ( 2 )], whose internal cavity accommodates a guest NO₃^? anion. Their hexanuclear cage‐like architectures are maintained both in solution and solid states as confirmed by mass spectrum as well as X‐ray diffraction experiments. These two cages display ligand‐based fluorescence emissions and therefore both were chosen to be operated as fluorescent chemosensors for the detection of nitroaromatic compounds. Attractively, these metal–organic cages allow highly selective and sensitive detection of picric acid (PA) over other nitroaromatics in solution and suspension, and the fluorescence resonance energy transfer (FRET) between the cage probes and PA is mainly responsible for the remarkable detection efficiency.